GTSPEC under bracing installed/pics

[blacksandiegovitz]

Originally Posted by hatchbackkid82

man i thought that sway bar would sit higher up in the car, seems like it sits low. looks good though

The car is jacked up about 1.5 feet on the driver side, so the rear is at full droop in that picture .

[SinCity_yaris]

The car is jacked up about 1.5 feet on the driver side, so the rear is at full droop in that picture .

can you take a pic of the brace when the car is not jacked up so we can get a real idea of how low it sits

[blacksandiegovitz]

Originally Posted by SinCity_yaris

can you take a pic of the brace when the car is not jacked up so we can get a real idea of how low it sits

It sit higher than any aftermarket exhuast/muffler , the rear sway brace will not scape on anything .

[SinCity_yaris]

Its sit higher than any aftermarket exhuast/muffler , the rear sway brace will not scape on anything .

thanks for the clarification

[whooppee777]

Originally Posted by BLAZINBLUEVITZ

bolts starting to rust already?

i didnt get bolts with mine. i picked up bolts that would fit from a hardware store and they didnt rust

[hatchbackkid82]

Ahhhhh i see. here i was thinking the first speed bump i hit will tear right off

Originally Posted by blacksandiegovitz

The car is jacked up about 1.5 feet on the driver side, so the rear is at full droop in that picture .

[silver_echo]

i wonder if that will fit my 01 echo...

[serious]

Originally Posted by blacksandiegovitz

Hey all ,
Picked these up from Garm this weekend . I'm very surprised at the fitment and the powder coating on these pieces looks amazing ! I haven't hit up any good twistes yet , so I'll have a review on the performance later . I also got the rear sway link brace too that I need to install.
Enjoy

Hi!

I'm new here and recently bought a 09 Yaris sedan i'm interested in one of the two bars that you have and visited the microimage site but i could not find the one that goes from the crossmember to the rear. can you please let me know were i can find them? Thanks in advance.

E.J.

[j2ip]

Finally, I put my last 3 pieces in my 08 Yaris Sedan today.

TRD Spring
TRD Rear Sway bar
NST Short Shifter Kit
GTSPEC 4 Point Front Lower Brace
GTSPEC Mid Lower Chasis Brace
GTSPEC Rear Lower Tie Bar
GTSPEC Rear Sway Link Brace
Cusco Lower Bar
Cusco Strut Tower Bar

[kngrsll]

Originally Posted by j2ip

Finally, I put my last 3 pieces in my 08 Yaris Sedan today.

TRD Spring
TRD Rear Sway bar
NST Short Shifter Kit
GTSPEC 4 Point Front Lower Brace
GTSPEC Mid Lower Chasis Brace
GTSPEC Rear Lower Tie Bar
GTSPEC Rear Sway Link Brace
Cusco Lower Bar
Cusco Strut Tower Bar

with all those bars installed, have you noticed any difference in chassis rigidity? what about the weight? any idea what all that weighs?

[BLAZINBLUEVITZ]

so the cusco ffront lower bar DOES NOT interfere with the gt spec front lower just found my newest mod.......

[blacksandiegovitz]

Originally Posted by BLAZINBLUEVITZ

so the cusco ffront lower bar DOES NOT interfere with the gt spec front lower just found my newest mod.......

^^ Me too Thanks for posting man , looking good !