For Sale: Every single part off an 07 MT Liftback

[CTScott]

Originally Posted by fnkngrv

I might be interested in resurrecting my A/C. Let me know what you would run me to "buy back" the parts that I sold you...lol.

You still have your compressor right? If so, you just need the lines and the condenser, if I remember correctly.

[fnkngrv]

Originally Posted by CTScott

You still have your compressor right? If so, you just need the lines and the condenser, if I remember correctly.

yup.

[CTScott]

Originally Posted by fnkngrv

yup.

Sounds like a plan. I will shoot you an email.

[3cyltrbo]

AC Stuff if not already spoken for (please)
(lines / condenser etc...) (I already have an interior switch but I could take that also if you wanted to clear out all AC stuff at once)



Also the left and right Kickpanels (plastic panels down by your feet)
And the left and right sill panels (plastic panels that join the kickpanels)
????$$$$$$?????????


maybe the back seat (pending some pictures of fabric style and condition)
(assuming the seat, I would just drive from Ottawa to your place to pick it up if that was alright)
???????$$$$$??????????

A-Pillar trim panels (the interior plastic pieces) IF this car has side airbags (if NOT side airbags equipped = can't use the trim pieces)

Cheers

Will

[dumbo0]

I want the white panels on the inside.. Like the pillars, and the one by the door.. Hehe

[gambit]

I'm interested in the door lock cables

[opt101]

scott please check pm

[HTM Yaris]

I would like the muffler and mid pipe please.

[CTScott]

Originally Posted by HTM Yaris

I would like the muffler and mid pipe please.

Unfortunately I ended up using them on the silver one that I just rebuilt.

[ilikerice]

Hey scott, I need the this part in front of the PASSENGER side mirror. My clips are broken so it kinda rattles in the wind sometimes. How much to Savannah, GA 31419?

[Astroman]

Scott, I'm in need of the fresh air/recirculating air assembly. A shop put some stuff in backwards years ago and it broke the cover on the bottom left (the c or half clam shell part) that actually diverts the fresh and recirculating air. Also when it did this it messed the cable up. Switch is fine. I really need it.

I'm also curious if I could get a price on the manual trans conversion parts (been wanting to do that since I bought the auto), and the right interior door panel (I broke my speaker cover on the door), zip 98802.

[CTScott]

Originally Posted by Astroman

Scott, I'm in need of the fresh air/recirculating air assembly. A shop put some stuff in backwards years ago and it broke the cover on the bottom left (the c or half clam shell part) that actually diverts the fresh and recirculating air. Also when it did this it messed the cable up. Switch is fine. I really need it.

I'm also curious if I could get a price on the manual trans conversion parts (been wanting to do that since I bought the auto), and the right interior door panel (I broke my speaker cover on the door), zip 98802.

So, you need the whole "bread box" assembly - That is definitely doable. Let me pull it and get a weight and I'll shoot you a quote.

Ryze268 beat you to asking about the MT conversion kit. If he doesn't bite, you are next in line.

The interior door panels (and possibly entire doors) are sale pending.

[CTScott]

Originally Posted by ilikerice

Hey scott, I need the this part in front of the PASSENGER side mirror. My clips are broken so it kinda rattles in the wind sometimes. How much to Savannah, GA 31419?

The passenger side one was gone. The driver side one is there, but two of the clips snapped when I was removing it. For yours, either use some 3M double sided tape or 3M emblem and molding adhesive (comes in a tube). My red one (Crashy #2) had broken clips and I used the 3M adhesive.

[ilikerice]

Originally Posted by CTScott

The passenger side one was gone. The driver side one is there, but two of the clips snapped when I was removing it. For yours, either use some 3M double sided tape or 3M emblem and molding adhesive (comes in a tube). My red one (Crashy #2) had broken clips and I used the 3M adhesive.

common issue I assume then. Thanks for the tip. Will do that later

[contraband831]

Do you happen to have the complete strut mounts (bearings, rubber etc..), if so how much shipped to 93635?

also side marker lights?

[CTScott]

Originally Posted by contraband831

Do you happen to have the complete strut mounts (bearings, rubber etc..), if so how much shipped to 93635?

also side marker lights?

Yes on the strut mounts. Let me pull them and get a weight. The left side marker light is good. the right side lost the clear cover.

[D&D]

Hey Scott,

I realize this is a tiny request, but I need one of the bolt covers that cover the front wiper bolt. See here for exact piece and part #: http://www.midatlantictoyotaparts.co...ft/85292-13010

Just let me know what you think is a fair price and I can PayPal you immediately.

Thanks! :)

[CTScott]

Originally Posted by D&D

Hey Scott,

I realize this is a tiny request, but I need one of the bolt covers that cover the front wiper bolt. See here for exact piece and part #: http://www.midatlantictoyotaparts.co...ft/85292-13010

Just let me know what you think is a fair price and I can PayPal you immediately.

Thanks! :)

I'd prefer to sell those covers along with the wiper arm.