|
05-07-2009, 12:00 AM | #37 | ||||
Banned
Drives: LB Join Date: Jul 2006
Location: OH
Posts: 7,787
|
Quote:
Quote:
Quote:
Quote:
I installed a boost gauge and GUESS WHAT?! 6 psi in third. What that means I don't know, but taking it to a dyno just jumped up the list of crap to do. I'm considering getting the following: http://www.bulletproofautomotive.com...il.php?ID=5196 http://www.bulletproofautomotive.com...il.php?ID=5195 http://www.bulletproofautomotive.com...il.php?ID=5203 That should help put a little more power to the ground. We shall see... Two more things... one, I looked back at my slips and realized I ran a .0000 reaction time on one run. LOL, it was the 2.2x 60' run where I missed second. Its the one that got away. That and I got 34 MPG on a tank where I ran @ the track. Yaris FTW. |
||||
05-11-2009, 02:18 PM | #38 |
rarer than JDM -1 of 1!
|
Is this the quickest USDM car so far?
If there's one thing I learned from drag racing, it's the fact that i'm not the quickest shifter in the world, but atleast i don't break trannies and gears. :) |
05-11-2009, 02:41 PM | #39 |
Banned
Drives: LB Join Date: Jul 2006
Location: OH
Posts: 7,787
|
Documented. That RWD Drift Yaris would kill Garm and I both, but if you don't post the slip it don't count!
|
05-11-2009, 02:46 PM | #40 |
l33t3st Asshole
Drives: MY07 Yaris Liftback Join Date: Nov 2006
Location: Epcot
Posts: 588
|
Did bulletproof confirm the C-One damper will work on the USDM NCP91 cars (since it's not listed to the JDM version either according to C-One)?
|
05-11-2009, 02:58 PM | #41 |
Banned
Drives: LB Join Date: Jul 2006
Location: OH
Posts: 7,787
|
I'll e-mail them and ask. I'll let you know.
|
05-11-2009, 02:59 PM | #42 | |
daily driver
|
Quote:
i take it you've never drag raced... nice times though chino...but it always sucks when someone else can drive your car faster than you can...
__________________
|
|
05-11-2009, 03:02 PM | #43 | |
l33t3st Asshole
Drives: MY07 Yaris Liftback Join Date: Nov 2006
Location: Epcot
Posts: 588
|
Quote:
aka. learn to drive chino!! |
|
05-11-2009, 03:02 PM | #44 |
Banned
Drives: LB Join Date: Jul 2006
Location: OH
Posts: 7,787
|
It won't last long. I'm getting better.
Don't forget I beat his 60' on that run by .2 seconds. If I could put a good front and back half together I think I can run a 14.6-14.7 @ 6 psi. That isn't bad if you ask me. |
05-11-2009, 03:07 PM | #45 |
l33t3st Asshole
Drives: MY07 Yaris Liftback Join Date: Nov 2006
Location: Epcot
Posts: 588
|
the last post sounded like you already had talked to them about everything and had the stuff on order.
|
05-11-2009, 03:09 PM | #46 |
Banned
Drives: LB Join Date: Jul 2006
Location: OH
Posts: 7,787
|
Noooo, I did talk to them but I talked to Garm too and he convinced me to try the torque damper first and see how that goes before I make the leap to the tranny mount. From what I hear (another member here has it) it pretty much makes the car undrivable under about 2,000 RPM.
However, it should fit. Bulletproof was a vendor here back in the YW stone age and they pushed those products hard, but like I said I'll double check. |
05-11-2009, 03:20 PM | #47 | |
l33t3st Asshole
Drives: MY07 Yaris Liftback Join Date: Nov 2006
Location: Epcot
Posts: 588
|
Quote:
here it is installed on the NCP13, if you want to be the $300 guinea pig I wont stop you. |
|
05-11-2009, 03:25 PM | #48 |
Banned
Drives: LB Join Date: Jul 2006
Location: OH
Posts: 7,787
|
OHHHH I get what you're asking now.
http://www.bulletproofautomotive.com...il.php?ID=5195 THAT part. I've got the Nitto version coming this week. |
05-11-2009, 03:41 PM | #49 | |
l33t3st Asshole
Drives: MY07 Yaris Liftback Join Date: Nov 2006
Location: Epcot
Posts: 588
|
Quote:
that's the one i've been talking about. the other two parts you have listed fit no problem as long as you're ok with the NVH. (C-One lists those for the NCP91). |
|
05-11-2009, 05:27 PM | #50 |
daily driver
|
i had Energy Suspension polyurethane mounts on my xrs and it was perfectly driveable....just transferred more engine vibration thru to the steering wheel and chassis and stuff....but in no way was in uncomfortable or remotely undriveable.
sure stopped the wheel hop when launching...
__________________
|
05-11-2009, 05:40 PM | #51 |
Carless in Chicago
|
Agreed. I didn't have too many problems when I went to drag a few weeks ago...but my car is also a lot slower than your's and Charles'.
__________________
Wanted: Forced Induction Some say that he is the secret love child of Ferrari and Porsche, and others say that he would lap James May twice in a 1/4 mile drag race. All we know is that he is called The Stig. |
05-11-2009, 06:22 PM | #52 |
l33t3st Asshole
Drives: MY07 Yaris Liftback Join Date: Nov 2006
Location: Epcot
Posts: 588
|
3 30 minute sessions WOT isn't less punishing. (it is cooler though).
|
05-11-2009, 06:27 PM | #53 | |
l33t3st Asshole
Drives: MY07 Yaris Liftback Join Date: Nov 2006
Location: Epcot
Posts: 588
|
Quote:
i know you bang through the gears coming out of the corners. unless you're autoxing where it's a 1-2 shift and that's it. either way, just glad people are getting out there. :D |
|
05-11-2009, 06:28 PM | #54 |
Banned
Drives: LB Join Date: Jul 2006
Location: OH
Posts: 7,787
|
Tires came in today. If the stars align and my torque damper gets here tomorrow I MIGHT run tomorrow, but if not it'll be Tuesday. I want that 100 MPH trap!
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Vitz (1st Gen) Tid Bits | Airknight | General Yaris / Vitz Discussion | 1 | 03-09-2017 04:24 AM |
My JDM Yaris..(Vitz Rs Wannabe) ^^ | davinelika | Photo-Video-Media Gallery | 20 | 10-05-2010 08:08 AM |
A German Yaris/Vitz/Echo ;) | we-to-11 | Photo-Video-Media Gallery | 5 | 06-27-2007 08:26 PM |
JDM Vitz Parts!! | MC-BPT | Sponsors Classifieds Area | 20 | 06-20-2007 02:44 PM |
Whats the Diff between a JDM Vitz vs A US Yaris vs an Asian Yaris. | nurburgring | General Yaris / Vitz Discussion | 5 | 03-23-2007 09:03 PM |