|
10-12-2009, 12:13 PM | #91 |
Slowy getting there
|
Speaking of dyno charts where is yours? Also frownonfun needs to post his too!!
__________________
|
10-12-2009, 12:23 PM | #92 |
Reluctantly Crouched...
Drives: 2008 Yaris HB M/T Join Date: Oct 2008
Location: DFW, TX
Posts: 867
|
Scanning today. My home scanner wasn't cooperating. :)
|
10-12-2009, 12:31 PM | #93 |
Slowy getting there
|
Oh ok...
__________________
|
10-12-2009, 12:34 PM | #94 | |
Quote:
Yes. Mike and I are both aware of this. I would fork out the dough to pay for the custom made pulleys and let him know if everything worked out. I would dyno my car and show the results and would provide the info on how much more lbs of boost I am getting. If everything was good, he would probably make a TWO-pulley supercharger set (overdrive crankpulley/smaller waterpump pulley) and sell them as that. He could make some decent money off of that and I am sure a lot of blitz owners would purchase it. However, he does not seem interested in making me the overdrive crank pulley/smaller water pump pulley anymore (like i've already stated in this thread) and the project is in the can. |
||
10-12-2009, 12:54 PM | #95 |
Slowy getting there
|
Why are you stuck on an overdrive crank pulley? Why not an underdrive s/c pulley? Did he say he was not interested? He told me that he would need someone witht the s/c there to do some testing and such. Why dont you start up a GI thread for it to show Mike how many people are interested in it? He is a busy guy why not try and help him out?
__________________
|
10-12-2009, 12:59 PM | #96 |
So I can keep my on/off function? He said he was interested and would do it for me. He did not say anything about needing someone with a blitz kit there to be able to make the pulley. Him making me the pulleys DID NOT require a GI thread, since I would be paying whatever cost was needed to make MY pulleys (for the 1000x). lmao.
You just don't stop, do you? /end *Mods: clean up this thread. thanks |
|
10-12-2009, 02:03 PM | #97 |
Slowy getting there
|
It's really funny how you want this and don't do any follow up on it.
__________________
|
10-12-2009, 02:33 PM | #98 |
It's really funny how you have no idea what you're talking about.
|
|
10-12-2009, 02:53 PM | #99 |
Reluctantly Crouched...
Drives: 2008 Yaris HB M/T Join Date: Oct 2008
Location: DFW, TX
Posts: 867
|
OK, here it is:
I know the numbers are pretty faint, but the scale on the left is HP and Torque, with an increment of 15, starting at 50, up to 200. Edit: Actually, totally unreadable once posted. I'll have to do a greyscale scan and repost. Still, it says: Max Torque (ft-lbs) 106 (@4000rpm) Max HP - 107 (@5900rpm) Max AFR - 12.6 (@3300rpm) HP and TQ cross-over at 5200rpm, right around 105 each. The torque curve is the middle one (blue), and is remarkably flat. :) |
10-12-2009, 03:25 PM | #100 |
Slowy getting there
|
Glad you got it up!!
__________________
|
10-12-2009, 04:22 PM | #101 |
Reluctantly Crouched...
Drives: 2008 Yaris HB M/T Join Date: Oct 2008
Location: DFW, TX
Posts: 867
|
|
10-12-2009, 04:28 PM | #102 |
daily driver
|
would be helpful to list mods in your post too...
__________________
|
10-12-2009, 09:56 PM | #103 |
Reluctantly Crouched...
Drives: 2008 Yaris HB M/T Join Date: Oct 2008
Location: DFW, TX
Posts: 867
|
OK, here is the darkened scan.
Relevant mods: NST 10% UD CR-lite pulley Thunder Axle-back Exhaust TRD CAI w/ WeaponR Secret Weapon dry element filter (also, bypass coupler replaced w/ plain coupler.) Air Temp: 78*F (@ intake, according to SGII) Relative Humidity: 77% Bar. Pressure: 30.20 inches (steady) |
10-13-2009, 11:53 PM | #104 |
Drives: 09 Yaris HB, 08 SR5 Tundra Join Date: Jan 2009
Location: RGV, Texas
Posts: 1,086
|
__________________
I crush you like tiny clown car, because you are clown, yes? |
10-14-2009, 02:21 AM | #105 |
ULTIMATE
Drives: 07 Yaris Turbo Join Date: May 2007
Location: Canoga Park, CA
Posts: 14,859
|
nice!
__________________
Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific. |
10-14-2009, 11:39 AM | #106 |
Slowy getting there
|
To bad the guy printed off your lowest pull
__________________
|
10-18-2009, 07:28 AM | #107 |
daily driver
|
dynojet dyno - -106.1whp and 107.1 wtq with intake, after-resonator exhaust and 87 octane, no other mods
__________________
Last edited by thebarber; 10-18-2009 at 12:14 PM. |
10-18-2009, 11:16 AM | #108 |
Reluctantly Crouched...
Drives: 2008 Yaris HB M/T Join Date: Oct 2008
Location: DFW, TX
Posts: 867
|
Nice! Looks like we've identified the benchmark hp/tq for the NA Yaris: better breathing. Your numbers are just a flip=flop of mine. Gotta love that flat torque curve. Are you running the stock crank pulley?
BTW - what brand of dyno? |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
NEWS: TOYOTA REVEALS ALL-NEW YARIS SEDAN AT 2006 LOS ANGELES AUTO SHOW | VitzBoy | General Yaris / Vitz Discussion | 7 | 09-20-2023 07:50 AM |
News : 2007 Toyota Yaris - the little Euro's official arrival | VitzBoy | General Yaris / Vitz Discussion | 9 | 06-06-2017 12:51 AM |
WR Yaris Intake Picture & Dyno. | WRLEO | Performance Modifications | 37 | 04-05-2007 07:02 PM |
WR INTAKE SYSTEM : YOU GET $100 FOR DYNO RESULTS ! | WRLEO | Sponsors Classifieds Area | 0 | 02-22-2007 10:14 AM |