Micro Image lowering springs 1.8" drop

[syntax]

Originally Posted by EjDaPogi

puede na raw si brosco sa crib ni sofia!

wala ba daw sadako dun? tulad nung nasa estraha tayo? wahahhaha

[xtremist]

Originally Posted by kiel12

oo pre matagtag sya.. sa sobrang tagtag dika maka pag patakbo ng mabilis, nung ako nga isang araw kulang kinabit pinapalitan kuna kagad kc nagagalit sakin mga sumusunod sakin sa sobrang bagal kong mag patakbo kc matagtag talaga.

wahaha..pala ka palang nakasakay sa bouncing car...hehehe

[xtremist]

Originally Posted by syntax

wala ba daw sadako dun? tulad nung nasa estraha tayo? wahahhaha

meron din....ang name nya si samako...wahahaha

[rye7jen]

Originally Posted by kiel12

pre bile ko dun sa lowering spring ko 13k tein s-tech sya, mahal talaga pag orig.. yung tanabe DF210 nasa 12k ganyan talaga price ng mga orig na brand, pero yung sinasabi na 6k ok din yun kaso diko subok kung maganda ride at tagtag nya sa yaris, di kagaya ng tanabe at tein subok na subok na sya mas maganda pa yung ride at tagtag nya sa stock na spring ng yaris..pag nakita nyo yung ke jherton kahit gano sya kababa ang ganda ng ride nya walang katagtag tagtag..

Pareng kiel, nagpa-align ka ba ng wheels after ma-lowered yaris mo nun?

[syntax]

@ rye ayon sa nababasa ko (toink !) kailangan talaga ng alignment ulit after two weeks or cguro kapag nag settle na ung springs,

reference lang po

http://www.yarisworld.com/forums/sho...34&postcount=6

[rosco]

Originally Posted by EjDaPogi

puede na raw si brosco sa crib ni sofia!

[kiel12]

Originally Posted by rye7jen

Pareng kiel, nagpa-align ka ba ng wheels after ma-lowered yaris mo nun?

hindi ako nag pa-align nung kinabit yung lowering spring ko, basta nung kinabit sya yun na ginamit kuna sya..kahit si jherton nung nilipat sa kanya yung spring ko di naman sya nag pa-align eh..

[syntax]

@ keil ok naman ang handling nung naka lowering springs kahit wala na alignment?

[rye7jen]

@pao, thank pre. yun nga ang mga nababasa ko dito, kaya curious lang din ako kung nagpa-align si kiel.

[kiel12]

Originally Posted by syntax

@ keil ok naman ang handling nung naka lowering springs kahit wala na alignment?

ok naman po ang handling sir kahit di ako nag pa align..

[rosco]

Originally Posted by kiel12

gandang tanong Sir, ginawa ko narin po yan nabili ko yung lowering clip ko sa banawe, ok naman po pag naka clip kaya lang hindi masyadong bababa yung oto kc maximum na maki-clip eh isang ikot lang ng spring mga 1" drop, pag kc dalawang ikot ang iki-clip nyo magiging matagtag na sya, actualy nasa bahay pa yata yung mga clip ko diko lang alam kung san kuna na ilagay..

baka nasayo pa yan...pede ng hadiya sa akin yan need ko lang 4 pcs para sa front

try ko lang hehehehe

[rosco]

[QUOTE=markylicious;539459]

kamusta na kaya si marky asan na kaya siya.....

[syntax]

@ rosco buhay pa sya wehehehe.. kakarating lang daw nung thursday...wala daw internet sa office kaya hindi makapag post sa forum, sa bahay daw pagod na sya pinapagod pa sya kaya hindi na makapag internet wehehehhe

[ronan4210]

guys, i am a newbie here. just registered minutes ago. Now ko lang nalaman may ganitong thread pala. :)

By the way, guys any of you has a review of Maxspeed lowering spring. It is much cheaper at 6,600.

http://www.sulit.com.ph/index.php/vi...pring+for+vios

any feedbacks will be appreciated. :)

[cali yaris]

$154 isn't much cheaper, I think. What are the spring rates?

[ronan4210]

Originally Posted by cali yaris

$154 isn't much cheaper, I think. What are the spring rates?

hi cali yaris. there is no information on the seller's page except that it will give a 1.5 drop. i also tried looking at maxspeed's site but it has no springs for toyota yaris.

by the way, i emailed you asking about the shipping weight of the microimage springs and the shipping cost to Riyadh, Saudi Arabia.

Thanks.

[syntax]

Originally Posted by ronan4210

hi cali yaris. there is no information on the seller's page except that it will give a 1.5 drop. i also tried looking at maxspeed's site but it has no springs for toyota yaris.

by the way, i emailed you asking about the shipping weight of the microimage springs and the shipping cost to Riyadh, Saudi Arabia.

Thanks.

i think it would be cheaper if group buy, as we did before from MI, at least 3 sets para mas makakamura.

[ronan4210]

Originally Posted by syntax

i think it would be cheaper if group buy, as we did before from MI, at least 3 sets para mas makakamura.

sir syntax, how much was the total shipping costs and taxes & duties for your group buy? thanks.