Toyota Yaris Forums - Ultimate Yaris Enthusiast Site
 

 


 
Go Back   Toyota Yaris Forums - Ultimate Yaris Enthusiast Site > Technical Forums > Forced Induction Forum
  The Tire Rack

Reply
 
Thread Tools Display Modes
Old 10-25-2015, 10:30 PM   #1
Innovative 1
 
Drives: 2007 Yaris HB 5spd
Join Date: Jan 2015
Location: Glendive, MT
Posts: 166
Power Enterprise supercharger install

Almost done installing power enterprise supercharger kit. Have had to modify a few things in the process. The supercharger bracket is built for the vitz of course. I had to fabricate a extension out of a piece of 1/4" flat steel at the bottom bolt hole that bolts through the base of the alternator. The bracket was off about an inch. With this diffence I had to run down to napa and get a 2" longer v-belt in order to get the tensioner positioned correctly. All of the plumbing provided with the kit is spot on. I'm intercooling it with a jdm intercooler kit so I am in the process of routing that. Its a tight fit but I'll make it work. Had to trim some of my crash bar (didn't have a choice) to tuck in plumbing in to clear the bumper. Also had to trim one of the pipes provided from jdm along with one of the 90 degree 2" couplers. All thats left after the plumbing gets wrapped up is wiring of the p-con sub computer. Then fill it up with premium and fire it up.
Innovative 1 is offline   Reply With Quote
Old 10-26-2015, 08:34 AM   #2
WeeYari
 
WeeYari's Avatar
 
Drives: 06 Polar White 5dr, 13 Soul 4u
Join Date: Oct 2008
Location: Georgetown, Ontario, Canada
Posts: 5,753
If ever this emoticon was needed, now is it!

__________________
WeeYari is offline   Reply With Quote
Old 10-26-2015, 06:22 PM   #3
invader166
Pumpman
 
Drives: 2019 Kia Soul EV Base
Join Date: Dec 2014
Location: Langley, BC
Posts: 434
Love how this kit is advertised as being direct bolt on.

http://www.rhdjapan.com/power-enterp...itz-ncp91.html

What's next? Factory fitment using angle grinder? lol
__________________
"I would rather loose by a mile in a car I built myself, then win by an inch in a car that was built for me." - Moog
invader166 is offline   Reply With Quote
Old 10-27-2015, 10:45 PM   #4
Innovative 1
 
Drives: 2007 Yaris HB 5spd
Join Date: Jan 2015
Location: Glendive, MT
Posts: 166
I will get some pics once the 45 degree coupler shows up. Jdm sport intercooler kit didnt come with one which I need to complete plumbing.
Innovative 1 is offline   Reply With Quote
Old 12-02-2015, 02:20 PM   #5
WeeYari
 
WeeYari's Avatar
 
Drives: 06 Polar White 5dr, 13 Soul 4u
Join Date: Oct 2008
Location: Georgetown, Ontario, Canada
Posts: 5,753
Quote:
Originally Posted by WeeYari View Post
If ever this emoticon was needed, now is it!

Quote:
Originally Posted by Innovative 1 View Post
I will get some pics once the 45 degree coupler shows up. Jdm sport intercooler kit didnt come with one which I need to complete plumbing.


Still waiting!!
__________________
WeeYari is offline   Reply With Quote
Old 12-02-2015, 09:31 PM   #6
fnkngrv
Mr. 155 and climbing
 
fnkngrv's Avatar
 
Drives: Seriously Modded 07 Sedan
Join Date: Jun 2006
Location: In The Hotbox
Posts: 4,742
The installation of any IC on the chassis will require a trimming of the crashbar.

Sent from my XT1575 using Tapatalk
__________________
Team Tiamat Racing on Facebook


Youtube Channel: Team Tiamat Racing


Class record holder in Land Speed @ 154.5mph for 1.5 mile and 145.5mph in the mile in the F (2.016 to 3.014 L), G (1.524 to 2.015 L), and H (1.016 to 1.523 L) classes.
fnkngrv is offline   Reply With Quote
Old 12-03-2015, 04:30 AM   #7
ilikerice
 
ilikerice's Avatar
 
Drives: 2010 black yaris
Join Date: Oct 2010
Location: savannah, ga
Posts: 2,868
Quote:
Originally Posted by WeeYari View Post


Still waiting!!
its on back order, i am sure...
__________________
-Derrick-
"Racing is important to men who do it well. When you're racing... It's life. Anything that happens before or after, is just waiting."
ilikerice is offline   Reply With Quote
Old 12-07-2015, 10:12 PM   #8
Innovative 1
 
Drives: 2007 Yaris HB 5spd
Join Date: Jan 2015
Location: Glendive, MT
Posts: 166
pics during install of PE supercharger kit

Here are some of the pics of the supercharger kit being installed. There is one pic of the fabricated supercharger bracket using a piece of thick flat steel to connect the bottom bolt hole at the base of the alternator. Went to napa and got a longer v-belt since it moved the bracket up and out about a inch.
Since those pictures were taken I also moved the pulse air cleaner so it would clear the forward edge of the top of the bumper. Just fabbed up a 90 degree piece of tubing that came with the jdm intercooler kit. I'll take a pic of it once I have it put back together. Waiting on a 2 to 2.5" coupler to show up in the mail to adapt the 1zz throttle body I just got to the 2" PE supplied tube that goes into the throttle body.
Attached Images
File Type: jpg 20151031_121014 (600x800).jpg (232.0 KB, 220 views)
File Type: jpg 20151031_121024 (600x800).jpg (256.9 KB, 216 views)
File Type: jpg 20151031_121033 (600x800).jpg (290.9 KB, 215 views)
File Type: jpg 20151031_121041 (600x800).jpg (246.0 KB, 213 views)
File Type: jpg 20151031_121112 (600x800).jpg (183.1 KB, 215 views)
File Type: jpg 20151031_121152 (600x800).jpg (239.5 KB, 215 views)
File Type: jpg 1446313620312 (600x800).jpg (242.4 KB, 212 views)
File Type: jpg 1446313738063 (600x800).jpg (237.8 KB, 213 views)
File Type: jpg 1446313817237 (600x800).jpg (265.9 KB, 212 views)
File Type: jpg 1446313847154 (600x800).jpg (211.5 KB, 212 views)

Last edited by Innovative 1; 12-07-2015 at 10:30 PM.
Innovative 1 is offline   Reply With Quote
Old 12-08-2015, 04:13 AM   #9
ilikerice
 
ilikerice's Avatar
 
Drives: 2010 black yaris
Join Date: Oct 2010
Location: savannah, ga
Posts: 2,868
whats the max boost this S/C can get up to?
__________________
-Derrick-
"Racing is important to men who do it well. When you're racing... It's life. Anything that happens before or after, is just waiting."
ilikerice is offline   Reply With Quote
Old 12-08-2015, 07:31 AM   #10
WeeYari
 
WeeYari's Avatar
 
Drives: 06 Polar White 5dr, 13 Soul 4u
Join Date: Oct 2008
Location: Georgetown, Ontario, Canada
Posts: 5,753
Jesus, there's nothing to it. More turbo looking than s/c.


Sent from my iPhone using Tapatalk
__________________
WeeYari is offline   Reply With Quote
Old 12-08-2015, 11:32 AM   #11
tmontague
 
tmontague's Avatar
 
Drives: '08 2zr swapped Vios M/T
Join Date: Oct 2012
Location: Caledonia Ont.
Posts: 2,938
I'm interested to see how well the engine management works with this in regards to CEL' and reliability. Other than the bracket it looks like a straightforward install. As well it seems that this one would be much lighter than the Blitz s/c

What's the price of this s/c?
__________________
No one ever wants to give a Yaris the point by...
tmontague is offline   Reply With Quote
Old 12-08-2015, 01:13 PM   #12
WeeYari
 
WeeYari's Avatar
 
Drives: 06 Polar White 5dr, 13 Soul 4u
Join Date: Oct 2008
Location: Georgetown, Ontario, Canada
Posts: 5,753
Quote:
Originally Posted by tmontague View Post
What's the price of this s/c?
A lot. If you search for some older threads, you will find where this thing originally was offered up for sale. At that time, it was a special one only, one time offer for over $3K. They retailed for a comparable amount to the Blitz. P/E seems overpriced to me given it is really only a compressor and some tubing. At least for the money, Blitz cast a whole new manifold.
__________________
WeeYari is offline   Reply With Quote
Old 12-08-2015, 01:25 PM   #13
tmontague
 
tmontague's Avatar
 
Drives: '08 2zr swapped Vios M/T
Join Date: Oct 2012
Location: Caledonia Ont.
Posts: 2,938
Ya I remember reading through those threads. I figured it dropped a bit in price lately.

I'd love to boost my Yairs and these thread always get me excited
__________________
No one ever wants to give a Yaris the point by...
tmontague is offline   Reply With Quote
Old 12-08-2015, 05:05 PM   #14
WeeYari
 
WeeYari's Avatar
 
Drives: 06 Polar White 5dr, 13 Soul 4u
Join Date: Oct 2008
Location: Georgetown, Ontario, Canada
Posts: 5,753
Quote:
Originally Posted by tmontague View Post
I figured it dropped a bit in price lately.
That only happens when product demand facilitates lowering the price point.

$4,350 USD currently Way too much $$

http://www.power-enterprise.co.jp/US...trex-news.html
__________________
WeeYari is offline   Reply With Quote
Old 12-08-2015, 06:22 PM   #15
tmontague
 
tmontague's Avatar
 
Drives: '08 2zr swapped Vios M/T
Join Date: Oct 2012
Location: Caledonia Ont.
Posts: 2,938
Ouch, as fun as boosting a Yaris would be it is hard to justify when I costs that much money and the performance is so limited.

Or at least limited where I live if you want the car to be street legal. Standalone ECU's cause an etest failure. Hence why a wrx is so appealing to me, tons of potential to go as far a you want with power and the ECU isn't a limiting point if you have an accessport since you can switch on or off certain CEL's.
__________________
No one ever wants to give a Yaris the point by...
tmontague is offline   Reply With Quote
Old 12-12-2015, 07:43 PM   #16
Innovative 1
 
Drives: 2007 Yaris HB 5spd
Join Date: Jan 2015
Location: Glendive, MT
Posts: 166
Didn't pay $4350. Got mine through rdh japan for $1000 less than that. That's just not any compressor. Its a rotex. Told 7 psi is max boost attainable.

Last edited by Innovative 1; 12-12-2015 at 09:20 PM.
Innovative 1 is offline   Reply With Quote
Old 12-13-2015, 01:18 PM   #17
CrankyOldMan
2ZR swap. DO IT! Ask how!
 
CrankyOldMan's Avatar
 
Drives: 09 Meteoric Metallic HB
Join Date: Feb 2011
Location: West Michigan
Posts: 2,333
If you already have some tubing and a piggyback ECU, you can get just the compressor for around $1500. It isn't just a belt-driven turbine, they have a proprietary gear/roller inside that housing that turns a few thousand RPMs into 10K+ rpm.

Also, keep in mind that this is not a positive displacement like the Blitz.
CrankyOldMan is offline   Reply With Quote
Old 12-13-2015, 03:55 PM   #18
tmontague
 
tmontague's Avatar
 
Drives: '08 2zr swapped Vios M/T
Join Date: Oct 2012
Location: Caledonia Ont.
Posts: 2,938
I'm also assuming that you don't need an inter cooler either if you are running low psi?

When people have posted in the past on Yw of their boosted cars throwing CEL' with a piggyback, what was the main issue's that were the reason for their problems? Or is it that the stock ECU just cannot deal with any level of boost? (hard to believe since the blitz s/c seems to work fine)
__________________
No one ever wants to give a Yaris the point by...
tmontague is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Compilation of Yaris How-tos/DIYs YarisBueller DIY / Maintenance / Service 39 04-28-2018 08:47 AM
DIY: Colibri Power Window Install Taiyaki DIY / Maintenance / Service 15 04-28-2016 09:03 PM
kit to install power locks? songa DIY / Maintenance / Service 21 02-12-2015 06:31 AM
Installation of original power windows and locks in Yaris lantis DIY / Maintenance / Service 4 02-25-2012 01:38 PM
When will the Yaris hit the showrooms at dealers? Petrolhead New YARIS Purchase Forum 181 11-28-2011 07:03 AM


All times are GMT -4. The time now is 04:26 PM.




YarisWorld
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.