|
12-13-2008, 12:10 AM | #1 |
Drives: '08 Bayou Blue LB AT Join Date: Oct 2008
Location: West Hills, CA
Posts: 2,517
|
(for Doc Zaius) aFe intake on a Blitz'd engine
The fitment is not as good as with the stock engine pics I've seen elsewhere. Perhaps my throttle body is closer to the driver side than stock. I'll have to check with a stock Yaris.
The air intake box is more squished and does not lay perpendicular to the battery. I can not find anything wrong with how it works though. I also have to reroute the crankcase hose. I don't like the way it looks compared to others.
__________________
aFe Intake | Blitz Supercharger | Megan Header | TRD Exhaust | NST Pulley Set TRD Shocks/Struts | Tanabe NF210 Springs | TRD Sway Bar | Motegi TRAKLITE wheels | Kuhmo Ecsta XS R1 Concepts slotted rotors | Carbotech 1521 brake pads | stainless steel brake lines | Seibon vented carbon fiber hood Last edited by LtNoogie; 12-13-2008 at 12:28 AM. |
12-13-2008, 12:24 AM | #2 |
Carless in Chicago
|
Very nice!!!
__________________
Wanted: Forced Induction Some say that he is the secret love child of Ferrari and Porsche, and others say that he would lap James May twice in a 1/4 mile drag race. All we know is that he is called The Stig. |
12-13-2008, 12:29 AM | #3 |
Drives: '08 Bayou Blue LB AT Join Date: Oct 2008
Location: West Hills, CA
Posts: 2,517
|
Not as nice as yours. Yours lays right in there like it is supposed to. But wait till you see my new engine cover. he he he
__________________
aFe Intake | Blitz Supercharger | Megan Header | TRD Exhaust | NST Pulley Set TRD Shocks/Struts | Tanabe NF210 Springs | TRD Sway Bar | Motegi TRAKLITE wheels | Kuhmo Ecsta XS R1 Concepts slotted rotors | Carbotech 1521 brake pads | stainless steel brake lines | Seibon vented carbon fiber hood |
12-13-2008, 12:31 AM | #4 |
Carless in Chicago
|
Ha, yeah right...not as nice as yours? I believe you have a few extra ponies under that hood.
__________________
Wanted: Forced Induction Some say that he is the secret love child of Ferrari and Porsche, and others say that he would lap James May twice in a 1/4 mile drag race. All we know is that he is called The Stig. |
12-13-2008, 12:33 AM | #5 |
Drives: '08 Bayou Blue LB AT Join Date: Oct 2008
Location: West Hills, CA
Posts: 2,517
|
Ohhhh yeah. And those ponies kick in at low rpms. I don't have to wait for high revs to feel the front wheels pulling like mad. And that whining sound is just magic.
Damn, now I want to go out and drive it around the block.
__________________
aFe Intake | Blitz Supercharger | Megan Header | TRD Exhaust | NST Pulley Set TRD Shocks/Struts | Tanabe NF210 Springs | TRD Sway Bar | Motegi TRAKLITE wheels | Kuhmo Ecsta XS R1 Concepts slotted rotors | Carbotech 1521 brake pads | stainless steel brake lines | Seibon vented carbon fiber hood |
12-13-2008, 12:40 AM | #6 | |
Carless in Chicago
|
Quote:
__________________
Wanted: Forced Induction Some say that he is the secret love child of Ferrari and Porsche, and others say that he would lap James May twice in a 1/4 mile drag race. All we know is that he is called The Stig. |
|
12-13-2008, 12:51 AM | #7 |
Drives: Blazing Blue Liftback Join Date: Oct 2008
Location: Port Angeles, Wa
Posts: 385
|
I want Noogie to post some video of his S/C. I was obsessed with his whole install.
I checked everyday for updates lol. |
12-13-2008, 01:12 AM | #8 |
Drives: '08 Bayou Blue LB AT Join Date: Oct 2008
Location: West Hills, CA
Posts: 2,517
|
LOL! I'm glad I was able to entertain you.
Thanks to Matt, I just went out, drove a couple of miles up the road and back and got it out of my system. Today was my last set of mods I felt I needed before letting her rip. I changed the spark plugs to high heat range plugs to help prevent pinging. I also took out the two-piece TRD CAI and replaced it with the aFe intake. People warned me that pieces of the TRD unit could be sucked into the S/C. Today, I saw what that piece could have been.
__________________
aFe Intake | Blitz Supercharger | Megan Header | TRD Exhaust | NST Pulley Set TRD Shocks/Struts | Tanabe NF210 Springs | TRD Sway Bar | Motegi TRAKLITE wheels | Kuhmo Ecsta XS R1 Concepts slotted rotors | Carbotech 1521 brake pads | stainless steel brake lines | Seibon vented carbon fiber hood |
12-13-2008, 01:15 AM | #9 |
12-13-2008, 01:16 AM | #10 |
Carless in Chicago
|
Good to hear about going out and driving Long, glad you were able to do so.
__________________
Wanted: Forced Induction Some say that he is the secret love child of Ferrari and Porsche, and others say that he would lap James May twice in a 1/4 mile drag race. All we know is that he is called The Stig. |
12-13-2008, 01:37 AM | #11 |
Drives: '08 Bayou Blue LB AT Join Date: Oct 2008
Location: West Hills, CA
Posts: 2,517
|
I will try to make one this weekend. It takes two cars and three people to do it right. You already saw what happens when you do it wrong.
__________________
aFe Intake | Blitz Supercharger | Megan Header | TRD Exhaust | NST Pulley Set TRD Shocks/Struts | Tanabe NF210 Springs | TRD Sway Bar | Motegi TRAKLITE wheels | Kuhmo Ecsta XS R1 Concepts slotted rotors | Carbotech 1521 brake pads | stainless steel brake lines | Seibon vented carbon fiber hood |
12-13-2008, 01:39 AM | #12 |
Put the camera on record and put it between the headrest and the seat of your passenger seat and WOT baby!
|
|
12-13-2008, 01:41 AM | #13 |
Drives: '08 Bayou Blue LB AT Join Date: Oct 2008
Location: West Hills, CA
Posts: 2,517
|
I'm having someone make the bracket for me at work next week. I bought some square aluminum tubing and well attach it to the headrest.
I'm taking a rider this weekend to the autocross. If he can hold the camera still, maybe we'll have a video of the car going through the course.
__________________
aFe Intake | Blitz Supercharger | Megan Header | TRD Exhaust | NST Pulley Set TRD Shocks/Struts | Tanabe NF210 Springs | TRD Sway Bar | Motegi TRAKLITE wheels | Kuhmo Ecsta XS R1 Concepts slotted rotors | Carbotech 1521 brake pads | stainless steel brake lines | Seibon vented carbon fiber hood |
12-13-2008, 01:44 AM | #14 | |
Carless in Chicago
|
Quote:
__________________
Wanted: Forced Induction Some say that he is the secret love child of Ferrari and Porsche, and others say that he would lap James May twice in a 1/4 mile drag race. All we know is that he is called The Stig. |
|
12-13-2008, 01:51 AM | #15 |
Drives: '08 Bayou Blue LB AT Join Date: Oct 2008
Location: West Hills, CA
Posts: 2,517
|
__________________
aFe Intake | Blitz Supercharger | Megan Header | TRD Exhaust | NST Pulley Set TRD Shocks/Struts | Tanabe NF210 Springs | TRD Sway Bar | Motegi TRAKLITE wheels | Kuhmo Ecsta XS R1 Concepts slotted rotors | Carbotech 1521 brake pads | stainless steel brake lines | Seibon vented carbon fiber hood |
12-13-2008, 01:53 AM | #16 |
Carless in Chicago
|
very cool
__________________
Wanted: Forced Induction Some say that he is the secret love child of Ferrari and Porsche, and others say that he would lap James May twice in a 1/4 mile drag race. All we know is that he is called The Stig. |
12-13-2008, 02:43 AM | #17 |
Drives: '14 GT86, '08 Vitz Join Date: Dec 2006
Location: Central Valley, CA
Posts: 9,873
|
I want more power!
|
12-13-2008, 08:48 AM | #18 |
TRIM HUNTER
Drives: 2007 BLAZIN BLUE YARIS 3 DR Join Date: May 2006
Location: ROCKLAND COUNTY NY
Posts: 2,088
|
im curious as to what would actually get sucked in? any pictures since you removed it already......
__________________
http://rocklandtoyota.com/IFrame.aspx?iFrameID=2388 TOYOTA PARTS AT A DISCOUNT........ |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
DIY: Intake Installation | redyaris | DIY / Maintenance / Service | 53 | 08-23-2014 05:34 AM |
Afe intake feed back required. | 1NZYaris1 | Performance Modifications | 51 | 03-20-2009 07:25 PM |
AFE Intake on a Sedan??? | CASTREX | Performance Modifications | 7 | 12-12-2008 12:27 PM |
Intake Systems Decision Maker.. | Blenjar | Performance Modifications | 25 | 09-15-2007 10:07 PM |
Anyone tried to appy Apexi SAFC or anything similar on their YARIIIII?? | oscarying | Performance Modifications | 25 | 10-21-2006 09:42 PM |