Toyota Yaris Forums - Ultimate Yaris Enthusiast Site
 

 


 
Go Back   Toyota Yaris Forums - Ultimate Yaris Enthusiast Site > Technical Forums > Forced Induction Forum
  The Tire Rack

Reply
 
Thread Tools Display Modes
Old 11-14-2008, 05:42 PM   #1
Nexus1155
Bathroom + Laptop = <3
 
Drives: Audi
Join Date: Aug 2006
Location: Dorchester
Posts: 1,009
Send a message via AIM to Nexus1155
Pre-Hack Repost: DIY Eaton Supercharger, Why Not?

So this is funny, Of course everything of mine got deleted from the hack so i am bringing it up again, but wondering more about it. I've never cared to look at how superchargers worked, but i knew the basics. I have some questions on certain issues as well...

So, a user by the name of BoogieQ did a DIY supercharger kit over on ScionLife using an Eaton M62 supercharger(2.5-3.0L Recommendation) Not near our range of 1.5, but he did it, it worked, why not. The exception is with how much power was robbed from the crank to get it to spin enough to make power....

Question in fact is, is the Blitz supercharger using the Eaton M62 or something similar to the size of it, is why the users are getting such minimilistic gains....

Now, here comes into play the Eaton M45(1.5L-2.0L from the mini cooper or Merc Komp, quite tiny as you can see(picture below) The mini with a 1.6L engine can make an upwards of 230hp with a smaller pulley upgrade as i've read. that is only .1l more, so we should not be far behind their gains(with the reasoning that every engine is made differently).

I have seen most superchargers bolt right up to the intake manifold itself, but it does not need to in a sense..all you would need to do is create an outlet from the supercharger that goes into the stock intake manifold, and just reroute some piping while keeping the stock design.

The extremeties of doing this are just piping and brackets to hold the superchargers weight, and of course belts and jargon... nothing at all really...What is stopping people from doing this? Show me some interest peoples!

Nexus1155 is offline   Reply With Quote
Old 11-14-2008, 05:43 PM   #2
mikenacarato
SIPNDEW
 
mikenacarato's Avatar
 
Drives: 15 STI
Join Date: Oct 2008
Location: Brentwood, TN
Posts: 2,281
Send a message via AIM to mikenacarato
if you can pull this off that would be incredible. i get eaton parts at a nice proce too. :)
mikenacarato is offline   Reply With Quote
Old 11-14-2008, 05:55 PM   #3
Nexus1155
Bathroom + Laptop = <3
 
Drives: Audi
Join Date: Aug 2006
Location: Dorchester
Posts: 1,009
Send a message via AIM to Nexus1155
well this might be a doozy, but i want to try to sell my Honda engine to see if i can purchase an M45 supercharger, preferably one from a mini, but they are kind of pricey compared to the bigger ones which is funny

I'm just wondering how much boost i can push without needing a tune. I guess only time will tell until it gets done on here

What else is needed for a supercharger to function correctly? It seems like im missing something, Inlet/Outlet/Belt/Vacuum Line?
Nexus1155 is offline   Reply With Quote
Old 11-14-2008, 06:12 PM   #4
cali yaris
ULTIMATE
 
cali yaris's Avatar
 
Drives: 07 Yaris Turbo
Join Date: May 2007
Location: Canoga Park, CA
Posts: 14,859
Send a message via AIM to cali yaris
Quote:
What is stopping people from doing this? Show me some interest peoples!
umm... what's stopping YOU?
__________________
Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific.
cali yaris is offline   Reply With Quote
Old 11-14-2008, 06:19 PM   #5
Nexus1155
Bathroom + Laptop = <3
 
Drives: Audi
Join Date: Aug 2006
Location: Dorchester
Posts: 1,009
Send a message via AIM to Nexus1155
wanna loan me about $600? hahahah
Nexus1155 is offline   Reply With Quote
Old 11-14-2008, 08:36 PM   #6
Tamago
Start another Oil Thread!
 
Tamago's Avatar
 
Drives: ZZW30
Join Date: Dec 2006
Location: South FL
Posts: 4,890
Send a message via AIM to Tamago Send a message via Yahoo to Tamago
lysholm (whipple) twinscrew headunits are more efficient than roots type blowers.. just FYI..
Tamago is offline   Reply With Quote
Old 11-14-2008, 08:42 PM   #7
justjesus
 
justjesus's Avatar
 
Drives: 2008 Liftback
Join Date: Oct 2008
Location: Orange County
Posts: 962
Quote:
Originally Posted by Nexus1155 View Post
I'm just wondering how much boost i can push without needing a tune. I guess only time will tell until it gets done on here

What else is needed for a supercharger to function correctly? It seems like im missing something, Inlet/Outlet/Belt/Vacuum Line?
I had a similar idea for a honda B-series motor. I've pretty much layed it to rest (for now).

You will likely need some bypass valve as well, for when you're running off boost.
justjesus is offline   Reply With Quote
Old 11-15-2008, 01:26 AM   #8
Nexus1155
Bathroom + Laptop = <3
 
Drives: Audi
Join Date: Aug 2006
Location: Dorchester
Posts: 1,009
Send a message via AIM to Nexus1155
AFAIK the blitz kits did not use a bypass valve...but there were thoughts on people adding one as well as an intercooler... i know the twinscrew ones are more effecient, but they are of similar design to the roots, just alot more complicated of a design...I will be posting my Honda Head on craigslist tomorrow to see if i can get any bites and i will let you guys know if i end up buying one...
Nexus1155 is offline   Reply With Quote
Old 11-15-2008, 10:30 AM   #9
Sabretooth
37HSSV
 
Sabretooth's Avatar
 
Drives: '11 Mazdaspeed 3
Join Date: Jan 2007
Location: St Cloud FL
Posts: 1,395
Send a message via AIM to Sabretooth
Hmm Im shocked I never came across this thread in the start.


I would say the best thing is to try and get a parts list from one of the guys who did a Blitz install and see what your needing for everything. It could be possible to compile a list of what ya need hardware wise, then just figure the rest out as you go.
__________________
07 Toyota Yaris Hatchback -sold-
11 Mazdaspeed 3 -SRI/TIP, 3 inch TBI, Custom FMIC, Tuned by Cobb Accessport, HKS ssq2 BOV, Upgraded HPFP-
Clean stock look... Killer performance.
Sabretooth is offline   Reply With Quote
Old 11-15-2008, 11:07 AM   #10
Nexus1155
Bathroom + Laptop = <3
 
Drives: Audi
Join Date: Aug 2006
Location: Dorchester
Posts: 1,009
Send a message via AIM to Nexus1155
yeah, im about to do that right now and search all the blitz install threads....and i got a couple of nibbles on the engine head so far so this might actually be a plausable project for me...

Should it go....

Intake > MAF > Supecharger > Throttle Body > Intake Manifold?

or

Intake > Supercharger > MAF > Throttle Body > Intake Manifold

im assuming the first one because you need to meter how much air is taken into the supercharger in the first place? but its debatable i guess because you're still monitoring the air after the fact of the supercharger as well
Nexus1155 is offline   Reply With Quote
Old 11-15-2008, 12:06 PM   #11
Morgan
 
Morgan's Avatar
 
Drives: 07 MM LB
Join Date: Oct 2008
Location: PCB, FL
Posts: 504
Quote:
Originally Posted by Tamago View Post
lysholm (whipple) twinscrew headunits are more efficient than roots type blowers.. just FYI..
yeah probably why our mini cooper s only got like 19 in the city... but it was whinney and quick!
__________________
Morgan is offline   Reply With Quote
Old 11-15-2008, 01:59 PM   #12
anonymous user
rarer than JDM -1 of 1!
 
anonymous user's Avatar
 
Drives: 07yaris
Join Date: Oct 2008
Location: windward oahu
Posts: 402
Interesting thread nexus1155. I'd also consider the rotrex s.c. The install seems so simple.
anonymous user is offline   Reply With Quote
Old 11-15-2008, 02:26 PM   #13
Nexus1155
Bathroom + Laptop = <3
 
Drives: Audi
Join Date: Aug 2006
Location: Dorchester
Posts: 1,009
Send a message via AIM to Nexus1155
The Rotrex supercharger is centrifigual?, I like the idea of it, but if i were going to do it that way, i might as well buy a turbo and make a turbo kit... I like the idea of this supercharger is because they are found quite affordable and are in abundance since they come from multiple cars...

The eaton compared to the rotrex would just be needing maybe a stronger mount, and a little more pipe work... but in essence the same... also the eaton you can find smaller pulleys to increase boost... i do not know if the same goes for the rotrex?
Nexus1155 is offline   Reply With Quote
Old 11-15-2008, 04:10 PM   #14
anonymous user
rarer than JDM -1 of 1!
 
anonymous user's Avatar
 
Drives: 07yaris
Join Date: Oct 2008
Location: windward oahu
Posts: 402
Cool beans man. In this times of difficult recession, although my company has assured me my job is "safe", i have seen many friends and people being laid off for restructuring or downsizing their staff. For this reason i am leery about dropping too much money into my car for what i currently deem "luxury" items.
I hope everyone here survives this awful time in american history.
anonymous user is offline   Reply With Quote
Old 11-15-2008, 10:08 PM   #15
Nexus1155
Bathroom + Laptop = <3
 
Drives: Audi
Join Date: Aug 2006
Location: Dorchester
Posts: 1,009
Send a message via AIM to Nexus1155
times are getting better, and i think it is a big hype for everyone, which is making it seems worse than it really is currently... Just do your best to get by and try to cut out un-needed items and it will make you feel better... like smoking... if you do smoke... nasty habbit

The cost I will try to estimate as best as i can...
Supercharger - $250
Piping/Flange work - $100(need custom parts made)
Mounting Brackets - $50
Misc Parts/Belt $50

So around $450 for a nice working kit. Honestly the only hard part i see about this kit is lining it up with the pulleys(Anyone know how much room for error in play i can have?) and custom flanges > piping will require some sheetmetal work or atleast for me to fiberglass something durable quickly and make a gasket for it...
Nexus1155 is offline   Reply With Quote
Old 11-16-2008, 02:24 AM   #16
Tamago
Start another Oil Thread!
 
Tamago's Avatar
 
Drives: ZZW30
Join Date: Dec 2006
Location: South FL
Posts: 4,890
Send a message via AIM to Tamago Send a message via Yahoo to Tamago
unless one has a serious hookup, you will not be seeing prices like the ones above.. change $150 for piping/flange/mounting brackets to about $500 for a more accurate number. and don't forget engine management.

trust me, DIY turbo will cost you less
Tamago is offline   Reply With Quote
Old 11-16-2008, 09:10 AM   #17
Nexus1155
Bathroom + Laptop = <3
 
Drives: Audi
Join Date: Aug 2006
Location: Dorchester
Posts: 1,009
Send a message via AIM to Nexus1155
wow, so technically as the cost of living goes up, pay gets cut and layoffs, and we get screwed even more... very nice

Quote:
unless one has a serious hookup, you will not be seeing prices like the ones above.. change $150 for piping/flange/mounting brackets to about $500 for a more accurate number. and don't forget engine management.
Regardless I cannot use engine management as of now anyways so i'm going to wing it without it until i find a better method than is out there now.....and pricing just depends where you shop until you find a good price...

I think the mounting brackets would have been cheaper than most things, its just a piece of metal that you could possibly make yourself with rough measurements..

If i were to do turbo(Already have two spare K03's), id just rather buy richards kit anyways for it being the easier thing to do, the supercharger kit requires no welding, and the ARC welder i have sucks and spatter will go everywhere... Plus a supercharged yaris just seems right for some reason...
Nexus1155 is offline   Reply With Quote
Old 11-16-2008, 09:50 AM   #18
eTiMaGo
vroom vroom
 
eTiMaGo's Avatar
 
Drives: lil red 5-door
Join Date: Sep 2006
Location: Bangkok, Thailand
Posts: 7,744
Send a message via AIM to eTiMaGo Send a message via MSN to eTiMaGo Send a message via Yahoo to eTiMaGo
there is indeed something indescribable about the urgency of that whine
__________________
The price of freedom of religion, or of speech, or of the press, is that we must put up with a good deal of rubbish.
- Robert Jackson


Bye bye 1NZ...
eTiMaGo is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 06:58 PM.




YarisWorld
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.