|
10-06-2009, 11:40 PM | #1 |
Got my Greddy Emanage Ultimate w/ universal harness in..
Got my Greddy Emanage Ultimate with universal harness in. It's not a plug and play harness. However, there is rumor that the JDM vitz harness will work on the USDM yaris. No proof of that yet though.
Now just need to see when the tuner can squeeze me into his busy schedule! Stay tuned.... |
|
10-06-2009, 11:47 PM | #2 |
Right beside you, wave
Drives: 08 PBM Yaris Sedan Join Date: Oct 2008
Location: Louisville, KY
Posts: 742
|
Can't wait for updates. If this works then I won't have to go with Autronic.
__________________
2008 Toyota Yaris Sedan. Pacific Blue Mica. Custom vinyl eyebrows, color matched interior trim pieces, Vios lip spoiler, 17" Maas rims 2010 Scion xB 7.0 Release Series. 1535 of 2000. Murasaki. Stock with TRD springs. |
10-07-2009, 12:03 AM | #3 |
subscribed and good luck.
|
|
10-07-2009, 12:51 AM | #4 |
JDM Fred
|
good luck, i hope you can pull a few more hp out of the yaris
|
10-07-2009, 01:10 AM | #5 |
10-07-2009, 09:35 PM | #6 |
ULTIMATE
Drives: 09 5dr LB, 2x 08 3dr LB Join Date: Oct 2008
Location: USA, CT
Posts: 13,460
|
I believe that the JDM harness will work. The ECM pinouts for the 1NZ-FE and 2NZ-FE are the same for USDM, TMMF and JDM.
|
10-08-2009, 07:57 PM | #7 | |
Start another Oil Thread!
|
buy plugs from toyota and build your own. PnP is for wusses
__________________
Quote:
|
|
10-08-2009, 10:02 PM | #8 |
I won't be using PnP.
|
|
10-25-2009, 02:07 PM | #9 |
Drives: Yaris ts Join Date: Feb 2009
Location: Gt
Posts: 4
|
nice i have a blue emanage, because it come with the greddy kit, but im thinking selling it to buy a ultimate, waiting update
|
10-27-2009, 04:58 PM | #10 |
I used to have 1700 posts
|
im confused. y r u going to use this. my blitz fuel controller works fine with my s/c
|
10-27-2009, 07:28 PM | #11 |
the blitz fuel controller has a conservative tune. i will be going for more power with this. also, i am getting a overdrive crank pulley made by NST that will give me more boost. That will give me more whp right off the bat; however, with a tune, there should be even better results.
|
|
10-27-2009, 10:39 PM | #12 |
37HSSV
|
Hopefully your new pulley can be paired with some underdrive Alternator and w/p pulleys?
__________________
07 Toyota Yaris Hatchback -sold- 11 Mazdaspeed 3 -SRI/TIP, 3 inch TBI, Custom FMIC, Tuned by Cobb Accessport, HKS ssq2 BOV, Upgraded HPFP- Clean stock look... Killer performance. |
10-27-2009, 10:52 PM | #13 |
It's coming with a smaller water pump pulley.
|
|
11-07-2009, 04:38 AM | #14 |
Drives: VITZ RS1500 Join Date: Mar 2006
Location: New Zealand
Posts: 15
|
the blitz ecu not working really well on my NCP13,when the car go on the dyno it show it's leak of petrol supply...after I changed to the turbo RS model fuel pump it help a bit,but I am also looking forward to tune the car with installing the same ECU as his one.
|
04-17-2010, 06:20 PM | #15 |
i am taking the car in thursday to get tuned with the greddy emanage ultimate. i had to purchase a cord that runs from the emanage to the vacuum nipple on the compressor. other than that, i'm good to go. stay tuned...
|
|
04-18-2010, 09:02 PM | #16 | |
Banned
Drives: Yaris 3dr Hatchback Join Date: Mar 2010
Location: SE Texas
Posts: 152
|
Quote:
Could you use one of these with a regular engine? Or would it not have any affect? |
|
04-19-2010, 06:45 AM | #17 |
Where is Oahu?
|
good luck with the tune? not talking to sean anymore?
__________________
808_Yaris Air Runner Thread:http://www.yarisworld.com/forums/sho...655#post329655 808_Yaris Air Runner Video:http://www.youtube.com/watch?v=fUkqox5d5No 808_Yaris Retrofit Projector Pictures:http://www.yarisworld.com/forums/showthread.php?t=22461 |
04-19-2010, 01:24 PM | #18 | |
Quote:
I don't know what that guy's deal is? The word on the street is that he's super busy, but I guess he doesn't want to make some "easy" money by doing this install/tune. I mean, everyone is always on his nuts saying how great he is; so I wanted him to do my stuff. I guess he wasn't interested. Oh wells. Hopefully sonics can pull through! :) |
||
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
DIY (08' USDM Liftback): ESUSE Fog Light Install v2.0 | goku87 | DIY / Maintenance / Service | 127 | 02-19-2023 07:01 PM |
Greddy xB kit vs Greddy Fit kit | ellenbetty | Forced Induction Forum | 52 | 09-29-2009 08:42 PM |
E Manage Ultimate | cdydjded | Performance Modifications | 5 | 05-14-2009 01:37 PM |
Elusive Greddy Ti-C? | RShatchback | Performance Modifications | 36 | 06-05-2007 04:11 PM |