|
|
05-24-2009, 09:47 PM | #1 |
Drives: Yaris Edition S Join Date: Jun 2007
Location: Germany
Posts: 27
|
1NZ-FE Turbo need help
Hey guys, i got a 1.3 2SZ-FE Yaris 2005, i bought a whole 1NZ-FE engine to do a swap and put an turbo on it. Now im lookin for parts to get a longer life to the engine but i cant find that much... i will be happy if u got some links of parts, turbo kits or usefull ideas/tips for me... Thank u! Also u can mail on: minesskyline2004@yahoo.de
|
05-24-2009, 10:27 PM | #2 |
I used to have 1700 posts
|
Forged pistons and Connecting rods for 1NZ-FE
http://www.scionlife.com/forums/view...4ea4a0a5d88202
http://www.raceprecision.com/forums/viewtopic.php?t=51 http://www.raceeng.com/p-9620-crwr-b...1nzfe-set.aspx http://www.yarisworld.com/forums/showthread.php?t=10606 http://www.clubxb.com/forums/f28/1nz...uild-8826.html http://cgi.ebay.com/ebaymotors/CP-Pi...91210005r21046 |
05-24-2009, 11:19 PM | #3 |
Drives: Yaris Edition S Join Date: Jun 2007
Location: Germany
Posts: 27
|
Thanks for that!
|
05-25-2009, 12:40 AM | #4 |
Drives: Yaris Edition S Join Date: Jun 2007
Location: Germany
Posts: 27
|
Where can i get a good header?
|
05-25-2009, 01:37 AM | #5 |
Who said Yaris was slow?
|
Header or turbo manifold?
|
05-25-2009, 02:27 AM | #6 |
Drives: Yaris Edition S Join Date: Jun 2007
Location: Germany
Posts: 27
|
Sorry, yes i mean turbo manifold... Kind Regards
|
05-25-2009, 10:58 AM | #7 | |
Start another Oil Thread!
|
do a 1.4L d4d diesel swap. you'll make more power and torque than a 1nz lol
__________________
Quote:
|
|
05-25-2009, 12:00 PM | #8 |
Drives: Yaris Edition S Join Date: Jun 2007
Location: Germany
Posts: 27
|
?
|
05-26-2009, 12:48 AM | #9 |
Who said Yaris was slow?
|
You won't find a long tube manifold for the Yaris. Any of those that you might have seem must have been custome made.
All the manifolds that I have seen for the 1nz are short due to the limited spaced behind the engine. http://cgi.ebay.com/REV-HARD-Cast-Tu...3A1%7C294%3A50 http://cgi.ebay.com/03-06-SCION-XB-X...3A1%7C294%3A50 |
05-26-2009, 01:40 AM | #10 |
37HSSV
|
Not exactly...
In my research I have found two types of Turbo manifolds for the Yaris, either the traditional "log" style, or the tube style... Only 1 place that I know of makes a tube style, and it should work better for the older gen Vitz over our newer ones. Although the car that had it used had to remove the power steering. http://www.turbinetech.ca/produit_de...ac096c&lang=AN Oh and I opt this be moved to the Forced Induction section
__________________
07 Toyota Yaris Hatchback -sold- 11 Mazdaspeed 3 -SRI/TIP, 3 inch TBI, Custom FMIC, Tuned by Cobb Accessport, HKS ssq2 BOV, Upgraded HPFP- Clean stock look... Killer performance. Last edited by Sabretooth; 05-26-2009 at 02:11 AM. |
05-26-2009, 07:20 AM | #11 | |
Start another Oil Thread!
|
don't forget RevHard cast manifolds
__________________
Quote:
|
|
05-26-2009, 09:33 AM | #12 | |
ULTIMATE
Drives: 07 Yaris Turbo Join Date: May 2007
Location: Canoga Park, CA
Posts: 14,859
|
Quote:
__________________
Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific. |
|
05-26-2009, 03:27 PM | #13 |
Drives: Yaris Edition S Join Date: Jun 2007
Location: Germany
Posts: 27
|
So what u think about to buy a whole turbo kit and maybee replace the manifold or buy everything in pices? And what u think about the two kits from ebay if u search for 1-nzfe turbo? I cant do a link in here because i moved and im online by phone...
|
05-26-2009, 05:29 PM | #14 |
ULTIMATE
Drives: 07 Yaris Turbo Join Date: May 2007
Location: Canoga Park, CA
Posts: 14,859
|
There are quite few threads that already cover this.
Basically PLEASE BUY A KIT so the rest of us can see if it works.
__________________
Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific. |
06-23-2009, 06:48 AM | #15 | |
I've made a post!
Drives: Toyota Vitz Join Date: Apr 2009
Location: Pakistan
Posts: 1
|
Quote:
i currently have a M/T & i m planning the 1NZ-FE also with a M/T its a 1st gen JDM VITZ 1.0 M/T any help please ? |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Twin turbo dual exaust yaris 1NZ-FE setup? | CtrlAltDefeat | Forced Induction Forum | 92 | 05-21-2009 12:14 PM |
Turbo Kit - trade for stock parts! | crankyelbow | Items for Sale by private party | 62 | 02-03-2009 12:30 PM |
delayed turbo project... | joey1320 | Forced Induction Forum | 8 | 09-26-2007 11:18 PM |
NCP 91 RS 1500 TRD Turbo ????? | ramishrrr | General Yaris / Vitz Discussion | 3 | 01-15-2007 04:51 PM |
Vitz Rs turbo vs U.S. Yaris add turbo? | weaponrcamry | Performance Modifications | 18 | 08-09-2006 08:45 PM |