|
04-14-2009, 03:00 AM | #1 |
Drives: 86 GTS Join Date: Apr 2009
Location: OC
Posts: 2
|
How do you remove front lip?
I tried searching but came up with nothing. I want to replace the oem front lip on my 4 door Yaris S but I dont know how to remove it. I took off the 2 screws on each side and the 4 bolts underneath but the thing just wont come off. What am I missing? I dont have a jack at the new place I moved to so its hard since its far away from home so its making things tough to look underneath.
|
04-14-2009, 03:10 AM | #2 |
Drives: Yaris YR Join Date: Oct 2008
Location: Perth, Australia
Posts: 515
|
Pretty sure there's at least some sort of tape or adhesive glue used. So it won't just come off once the screws are off.
My side skirts i just got done recently are bolted on and glued on. You might have to heat up the sides abit with a hairdryer or heatgun im guessing. Im not 100% on that so you might want to wait till someone else chimes in.
__________________
Mods: 17x7 ANZ Tazer Wheels with 215/40/17 Marangoni Tyres | AFE Air Intake System | NST Short Shifter Kit | NST Shifter Cable Bushing Kit | NST 10% Underdrive Crank Pulley | Pedders Sports Springs | Custom 2inch Cat-Back Walker Muffler with 2.5inch Xforce Twin Stainless Steel Tip | RS Side Skirts | RS Euro Spoiler | YRX Front Lip Spoiler | TRD Style Front Grill | 12mm Rear Hub Spacers | Ultra Racing 23mm Rear Sway Bar |
04-14-2009, 03:48 AM | #3 |
Drives: 86 GTS Join Date: Apr 2009
Location: OC
Posts: 2
|
It might have at one time but I dont think that it is anymore or maybe not the whole lip anymore. Like I can move it somewhat but not the whole thing. Like I can bend the sides but not so much in the middle.
|
04-14-2009, 04:13 AM | #4 |
Drives: '14 GT86, '08 Vitz Join Date: Dec 2006
Location: Central Valley, CA
Posts: 9,873
|
Look around the lip. Do you see a black rubber-looking thing? If so, I think that's the adhesive (in addition to the bolts/screws).
|
04-14-2009, 04:24 PM | #5 |
It's the illusion you see
Drives: 07 Yaris Sedan Aero Join Date: Oct 2006
Location: Brossard, QC
Posts: 3,888
|
there are at least 4 clips behind the lip. I simply yanked it out whatever was holding in the middle.
the little rubber band do adhere a little, but that's just a little. When the lip is out, you are left with a bunch of holes on the lower bumper :P |
11-11-2019, 08:16 PM | #6 |
Drives: RS Join Date: Apr 2010
Location: Hamilton, ON, Canada
Posts: 26
|
HELP!
Can someone tell me where to get the rubbers in between the panels and the moldings, once you un-glue the aero package?
|
11-13-2019, 08:24 AM | #7 |
3 Yaris and counting..
Drives: 07 Yaris rs 3 door 2zr swaped Join Date: Feb 2016
Location: Toronto Canada
Posts: 672
|
Maybe the dealer... although I have a feeling they will tell you you have to buy the entire moulding.
__________________
No one suspects the Yaris. Xd/2zr-fe Swap/Build Thread http://www.yarisworld.com/forums/showthread.php?t=61427 Bolt-in 3.75" Suspension Lift Build Thread http://www.yarisworld.com/forums/showthread.php?t=61577 |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
My new vios grill and front lip splitter Pics Inside =) | YarisSedan | Cosmetic Modifications (Exterior/Interior) | 10 | 02-21-2009 12:51 AM |
2009 Sedan Aerokit Front Lip Part #? | Split | Cosmetic Modifications (Exterior/Interior) | 9 | 11-26-2008 07:19 PM |
How hard is it to remove side skirts and front lip on 08 sports package? | dono37 | Cosmetic Modifications (Exterior/Interior) | 15 | 09-26-2007 05:28 PM |
Front Lip on S has peeling paint... | fnkngrv | DIY / Maintenance / Service | 7 | 09-05-2006 03:32 PM |