|
08-29-2014, 02:28 PM | #1 |
Drives: 2008 Black Sedan Join Date: Oct 2008
Location: FL
Posts: 966
|
FS: Turbo Kit and other goodies for cheap
Sold my Yaris and got a BRZ so here is what I have for sale:
Custom turbo kit with garret gt28 rs turbo charger, synapse bov, vband clamps with 3" dp and tail wastgate with 14 psi spring Halteck sprint 500 ecu Aem True boost gauge Aem oil pressure gauge Aem Ugeo AFR gauge Scanguage 2 550cc Fuel injectors I will try to get pics up this weekend. I invested quite a bit into this kit but not looking to make a profit but help someone else to have a good time. Car dynoed at 258 whp and 254 tq at 13.8 psi. Price dropped to $1000. See post 14 Pics below of kit and other stuff I have laying around. Not sure how to make it look more organized but ehh Last edited by Yoda; 09-02-2014 at 07:13 PM. |
08-29-2014, 02:29 PM | #2 |
3dr Angry Bubble
Drives: 07 Yaris HB Join Date: Jun 2014
Location: Tamarac, FL
Posts: 55
|
where in florida are you located. im interested big time
|
08-29-2014, 04:39 PM | #3 |
Drives: Vitz RS Join Date: Feb 2009
Location: Trinidad and Tobago
Posts: 272
|
If you are willing to sell parts separately I am interested in a manifold. That is a good price for the lot of stuff you have
|
08-29-2014, 07:59 PM | #4 |
Drives: 2008 Black Sedan Join Date: Oct 2008
Location: FL
Posts: 966
|
|
08-29-2014, 08:00 PM | #5 |
Drives: 2008 Black Sedan Join Date: Oct 2008
Location: FL
Posts: 966
|
I might have an extra one around here but it would be for an internally gated turbo. Going to a football game this weekend when I will take some pictures when I get back.
|
08-29-2014, 08:37 PM | #6 |
Obsessed with 1.5L
Drives: '10 PW Yaris Sedan Join Date: Feb 2011
Location: Westminster, MD
Posts: 907
|
Was that on a stock motor?
__________________
-Greg...the Exhaust Freak. -10 PW sedan 107whp/110wtq, full exhaust, suspension bits, TRD LSD -06 Highlander 3mzfe Limited AWD -82 Malibu, 1uzfe swap -97 Tercel coupe, 1nzfe/4.31 -96 Tercel coupe, Turbo 5efe, autoX -96 Tercel 4dr |
08-29-2014, 09:37 PM | #7 |
Takes corners too fast!
Drives: Absolute Red 2009 Yaris HB Join Date: Apr 2012
Location: Columbia, SC
Posts: 830
|
but I want it and can't afford it or my wife kills me.
__________________
mods:15''Drag DR21 w/Nitto NeoGen 205/50R15, Tanabe DF210 lowering springs 1.6/1.8, TRD Rear Sway Bar, Tanabe Front Sway Bar, Micro Image Short Throw Shift Kit (both in and under), 8.64lbs flywheel, F1 Stage 4 Clutch, AEM Cold Air Intake (Red), Megan Racing Header, DC Sports Axle Back Exhaust, Micro Image Crank Pulley, NST lite Alternator Pulley, ARP Manifold Stud Kit,Tanabe Front Strut Tower Brace, ScanGuage II, Micro Image Silicone Radiator Hose Kit (Red), NRG Carbon Fiber Shift Knob (round), 2009-2011 Toyota Yaris Liftback Foglight kit, NRG Grounding Kit (Red), Hella Horns(Red),CF Hood |
08-30-2014, 02:22 AM | #8 |
Drives: Decepticon - Ravage Join Date: Nov 2008
Location: San Francisco
Posts: 1,462
|
Crazy price, should go fast. Cant wait for some pics.
__________________
Check out my Build thread: http://www.yarisworld.com/forums/showthread.php?t=52274 |
08-30-2014, 08:53 AM | #9 |
Drives: Vitz RS Join Date: Feb 2009
Location: Trinidad and Tobago
Posts: 272
|
|
08-30-2014, 06:58 PM | #10 |
Drives: 2013 Yaris Join Date: Oct 2011
Location: Portland, OR
Posts: 914
|
I've been wondering if that was on a stock engine also, lol. I wouldn't mind the power but I don't want to do a full build at the moment lol.
|
08-30-2014, 11:09 PM | #11 |
Drives: 09 Blizzard Pearl RS LB Join Date: Sep 2009
Location: Calgary, Alberta
Posts: 371
|
The stock motor can handle about 8psi of boost safely. Running anymore boost than that and you will compromise it's reliability. To run this kit long term it is highly suggested that you replace the stock internals with better parts.
__________________
“On a given day, a given circumstance, you think you have a limit. And you then go for this limit and you touch this limit, and you think, 'Okay, this is the limit'. And so you touch this limit, something happens and you suddenly can go a little bit further. With your mind power, your determination, your instinct, and the experience as well, you can fly very high.” ― Ayrton Senna |
08-31-2014, 09:29 AM | #12 |
Drives: 2008 Black Sedan Join Date: Oct 2008
Location: FL
Posts: 966
|
No the internals are not stock. Piston and rods and bored out just a bit. You would need to change the spring in the wastgate to an 8 psi spring n that should get u to 200whp on the stock motor. I ran 200whp for along time without issue just have to make sure your tune is good.
|
08-31-2014, 06:51 PM | #13 |
Drives: 2002 JDM Vitz 1.3 Join Date: Feb 2013
Location: Antigua & Barbuda
Posts: 287
|
Price for the extra manifold?
__________________
2000 JDM Vitz [2NZ-FE Crap-otmatic] < Now Manual Conversion complete Follow me on Instagram: instagram.com/itzkingjustin |
09-01-2014, 09:59 PM | #14 |
Drives: 2008 Black Sedan Join Date: Oct 2008
Location: FL
Posts: 966
|
Just got back in today and started to organize everything when I noticed something. Not sure how but the compressor wheel will not turn freely
I was able to turn it easily by hand when I took it off but now its hard to move. The blades are fine and I don't see any scratches on the walls. Not sure what exactly happened but it needs to be rebuilt. Could be an easy and cheap fix but I don't have the time to look into it. As a result I will be including it with the kit for free and knocking down the price to $1000. Pictures will come tomorrow I am too tired and a bit disappointed to deal with it now. |
09-01-2014, 10:02 PM | #15 |
Drives: 2008 Black Sedan Join Date: Oct 2008
Location: FL
Posts: 966
|
|
09-02-2014, 08:54 PM | #16 |
Drives: 2002 JDM Vitz 1.3 Join Date: Feb 2013
Location: Antigua & Barbuda
Posts: 287
|
Is that intake manifold for a 3 bolt throttle body? I'm in dire need of one
__________________
2000 JDM Vitz [2NZ-FE Crap-otmatic] < Now Manual Conversion complete Follow me on Instagram: instagram.com/itzkingjustin |
09-02-2014, 08:56 PM | #17 |
Drives: 2008 Black Sedan Join Date: Oct 2008
Location: FL
Posts: 966
|
|
09-02-2014, 11:10 PM | #18 |
Drives: 2002 JDM Vitz 1.3 Join Date: Feb 2013
Location: Antigua & Barbuda
Posts: 287
|
Thanks, I have an adapter, it's 3 to 4 but not the other way around
Really wish I could buy your kit but shipping and customs would rape me
__________________
2000 JDM Vitz [2NZ-FE Crap-otmatic] < Now Manual Conversion complete Follow me on Instagram: instagram.com/itzkingjustin |
|
|