|
02-19-2010, 03:09 PM | #1 |
Just a Herbicidal maniac.
Drives: 2008 Yaris S Sedan Flint Mica Join Date: Oct 2008
Location: Roseville, CA - USA.
Posts: 450
|
Sedan - custom center exit exhaust.
Well after looking and looking at aftermarket exhaust systems, I'm....well....exhausted. I've always liked Kaotic Lasagna's center exit on his sedan, so it looks like I'm going to copy him. What's that saying, something like "Imitation is the sincerest form of flattery"? I like his system better than say dual stacks out the trunk lid! Anyway, I found a muffler/exhaust shop about 8 miles from where I live that does custom work. I have a ton of info from K.L about his system, so I'm taking all that with me tomorrow and I'm meeting with the owner of the shop to hopefully get an estimate for the work. Unless they have a smokin' deal on a muffler, I'll probably order that piece off the internet and bring it to him. I think his shop can do mandrel bends for a nice smooth exhaust flow. I'll keep ya'll posted and shoot some pics as it comes together.
__________________
2008 Toyota Yaris (Vios) 'S' sedan, Flint Mica, dropped on TRD springs, TRD anti-sway bar. Tinted rear windows. Lenso Samurai SC02 hyper black 17" x 7" rims, wrapped in 205x40x17 Federal ss595's. Color matched eyelids. Vios badge. Body color trunk trim (was chrome). Lamin-X tint on rear tails. Custom center exit exhaust. Tanabe front strut tower brace. |
02-19-2010, 08:41 PM | #2 |
Drives: 2006 yaris Join Date: Oct 2008
Location: Puerto Rico
Posts: 536
|
what tip did you get?
|
02-19-2010, 10:36 PM | #3 |
Drives: '14 GT86, '08 Vitz Join Date: Dec 2006
Location: Central Valley, CA
Posts: 9,873
|
Mandel bends! That's going to be better than mine!
|
02-19-2010, 11:04 PM | #4 |
Just a Herbicidal maniac.
Drives: 2008 Yaris S Sedan Flint Mica Join Date: Oct 2008
Location: Roseville, CA - USA.
Posts: 450
|
I'm not trying to out-do you, hopefully that's what this shop does. I guess I'll find out tomorrow.
I haven't decided yet. I'll see what the shop has available to get some ideas. I think for it to look right, it needs to be a dual outlet, probably stainless steel.
__________________
2008 Toyota Yaris (Vios) 'S' sedan, Flint Mica, dropped on TRD springs, TRD anti-sway bar. Tinted rear windows. Lenso Samurai SC02 hyper black 17" x 7" rims, wrapped in 205x40x17 Federal ss595's. Color matched eyelids. Vios badge. Body color trunk trim (was chrome). Lamin-X tint on rear tails. Custom center exit exhaust. Tanabe front strut tower brace. |
02-20-2010, 03:19 AM | #5 | |
Drives: '14 GT86, '08 Vitz Join Date: Dec 2006
Location: Central Valley, CA
Posts: 9,873
|
Quote:
|
|
02-21-2010, 11:04 PM | #6 |
Just a Herbicidal maniac.
Drives: 2008 Yaris S Sedan Flint Mica Join Date: Oct 2008
Location: Roseville, CA - USA.
Posts: 450
|
I met with the owner of the muffler/exhaust shop (Mark) on Saturday and he's a cool dude! His partner in crime is Bill and both are very knowledgable about custom systems. We put my car up on his rack and looked at the system basically from the cat's back. In the end, we'll probably leave the factory resonator and just work in a new muffler (brand name I don't remember but is new to the market) just past the rear axle and run the remaining distance to a dual tip center exit. He doesn't do mandrel bends, but for our size motor, as long as the curves are not too sharp, his piping will flow just fine. They totally agree about keeping it 'clean' and 'simple' and tucked up out of sight. We also talked about painting the muffler and the piping black so that the only thing you see is that dual tip! At one point, they both went out to their cars and fired 'em up so I could hear their exhaust, that was pretty cool. They are both a couple of gearheads.
I didn't even think to bring my camera, but all us that were at the shop (even a passerby) like the center exhaust (mocked it up on a couple of stands so we could stand back and get a good look at it) and both Mark and Bill believe they can run with less pipe than Kaotic Lazagna has (sorry man!). I took with me pictures of K.L's exhaust and that helped immensely! Now I just need to do it! So far I am very impressed with these guys at All Muffler Services, Inc. in Rocklin, CA. I spent about an hour and a half talking with them and getting an education myself about Magnaflow vs Flowmaster, etc. They were more than willing to listen to what I wanted and feel confident they can set me up with a system that I will love! The out-the-door quote for the muffler, dual tip, piping, labor, etc is just a hair over $400. This is a little more than I was hoping to spend, but these guys will do what it takes to make me happy and they are local so that makes them easy to work with. So far, I would recommend these guys to anyone in the greater Sacramento area if you are considering a custom exhaust. When I left, I felt like I had known these guys for years, they are really super nice, down to earth people that love what they do. As I'm sure you can tell, I'm excited about getting this done, just need to check my finances and pull the trigger. I definately want it done before our Nor-Cal meet next month.
__________________
2008 Toyota Yaris (Vios) 'S' sedan, Flint Mica, dropped on TRD springs, TRD anti-sway bar. Tinted rear windows. Lenso Samurai SC02 hyper black 17" x 7" rims, wrapped in 205x40x17 Federal ss595's. Color matched eyelids. Vios badge. Body color trunk trim (was chrome). Lamin-X tint on rear tails. Custom center exit exhaust. Tanabe front strut tower brace. |
02-22-2010, 08:41 PM | #7 |
Drives: '14 GT86, '08 Vitz Join Date: Dec 2006
Location: Central Valley, CA
Posts: 9,873
|
hahaha, I think I know how they're doing it so that it requires less piping than mine. They're going to use a muffler that has an inlet and outlet on opposite sides, oppose to mine that has it on the same side. Then they're going to do a 90 degree turn to the driver side of the car towards the mid-line, then another 90 degree to make it go out the rear. Definitely less piping and bends than my set up. However, $400 seems really high for an axle-back. If you really want to spend less than that, you should go to where I had mine done.
|
02-22-2010, 08:58 PM | #8 |
★weeaboo★
|
^ +1
I think I had my exhaust done at the same place (MufflerTech Laz?) and I think it was no more than $300. Although they didn't go as in depth as the place you went to, but then again, I didn't ask many questions as I knew exactly what I wanted to get. (Piping size, cat delete, stock resonator etc) Although they were nice enough to show me an example car with the muffler I was recommended so I could hear it. (I wanted Borla, but my wallet said no, so we found a Magnaflow with a similar tone) If you're curious we could meet up so you can hear my exhaust, I don't know what you're looking for as far as sound, but mine has a deep tone that's very nice, albeit loud. :) |
02-22-2010, 09:57 PM | #9 | ||
Just a Herbicidal maniac.
Drives: 2008 Yaris S Sedan Flint Mica Join Date: Oct 2008
Location: Roseville, CA - USA.
Posts: 450
|
Quote:
Quote:
__________________
2008 Toyota Yaris (Vios) 'S' sedan, Flint Mica, dropped on TRD springs, TRD anti-sway bar. Tinted rear windows. Lenso Samurai SC02 hyper black 17" x 7" rims, wrapped in 205x40x17 Federal ss595's. Color matched eyelids. Vios badge. Body color trunk trim (was chrome). Lamin-X tint on rear tails. Custom center exit exhaust. Tanabe front strut tower brace. |
||
02-22-2010, 09:59 PM | #10 |
★weeaboo★
|
My availability is crap this week, I have a lot of late days, but my weekend is wide open for the most part so we should hang out then for sure.
|
02-22-2010, 10:40 PM | #11 |
Drives: '14 GT86, '08 Vitz Join Date: Dec 2006
Location: Central Valley, CA
Posts: 9,873
|
Herb, you're in luck. I live in Rancho Cordova. hahahahaha. Hit me up to see if I'm home when you're available.
Oh, the bends I was referring to where after the muffler outlet. I can't remember the bends before the inlet. hehehe. But yeah, SS tip and new hangers, I can see why they're charging 400 big ones. I think my resonator-back would have been close to 400 if I had gotten a SS tip. |
02-22-2010, 10:42 PM | #12 | |
Drives: '14 GT86, '08 Vitz Join Date: Dec 2006
Location: Central Valley, CA
Posts: 9,873
|
Quote:
|
|
02-22-2010, 10:47 PM | #13 |
★weeaboo★
|
|
02-22-2010, 11:02 PM | #14 | |
Just a Herbicidal maniac.
Drives: 2008 Yaris S Sedan Flint Mica Join Date: Oct 2008
Location: Roseville, CA - USA.
Posts: 450
|
Quote:
Lunch time? My lunch hour is flexible. I work near Hazel Ave and Hwy 50.
__________________
2008 Toyota Yaris (Vios) 'S' sedan, Flint Mica, dropped on TRD springs, TRD anti-sway bar. Tinted rear windows. Lenso Samurai SC02 hyper black 17" x 7" rims, wrapped in 205x40x17 Federal ss595's. Color matched eyelids. Vios badge. Body color trunk trim (was chrome). Lamin-X tint on rear tails. Custom center exit exhaust. Tanabe front strut tower brace. |
|
02-22-2010, 11:11 PM | #15 |
Drives: '14 GT86, '08 Vitz Join Date: Dec 2006
Location: Central Valley, CA
Posts: 9,873
|
I have morning and lunch time classes at CSUS. Best day for those hours would be Mondays and Wednesday. We can meet at Sac State if you and James can't meet up by then.
|
02-23-2010, 01:39 AM | #16 |
★weeaboo★
|
|
02-23-2010, 10:29 AM | #17 | |
Just a Herbicidal maniac.
Drives: 2008 Yaris S Sedan Flint Mica Join Date: Oct 2008
Location: Roseville, CA - USA.
Posts: 450
|
Quote:
Cool. Do you want to meet and grab some lunch somewhere? How about checking in with a PM sometime Saturday afternoon/evening and see if Sunday is still clear?
__________________
2008 Toyota Yaris (Vios) 'S' sedan, Flint Mica, dropped on TRD springs, TRD anti-sway bar. Tinted rear windows. Lenso Samurai SC02 hyper black 17" x 7" rims, wrapped in 205x40x17 Federal ss595's. Color matched eyelids. Vios badge. Body color trunk trim (was chrome). Lamin-X tint on rear tails. Custom center exit exhaust. Tanabe front strut tower brace. |
|
02-24-2010, 12:33 PM | #18 |
★weeaboo★
|
Yeah, we can do something like that, sounds good to me. Just shoot me a PM on Saturday and we can set a time.
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
NEWS: TOYOTA REVEALS ALL-NEW YARIS SEDAN AT 2006 LOS ANGELES AUTO SHOW | VitzBoy | General Yaris / Vitz Discussion | 7 | 09-20-2023 07:50 AM |
custom center caps? or vitz center caps | BrazdonW | Cosmetic Modifications (Exterior/Interior) | 2 | 09-06-2009 11:21 PM |
CUSTOM MADE YARIS EXHAUST FOR 60$ | g0nthedin0 | Items for Sale by private party | 5 | 01-23-2009 03:33 PM |
Exhaust tips Sedan Liftback | tomjasz | Cosmetic Modifications (Exterior/Interior) | 25 | 08-14-2006 06:05 PM |