DIY Cruise Control for 2012 Yaris - Good News!

[stuart_f]

Hi Danieldk,

Have a look at post 37. I have the paddles and had the same issue with getting to the 2 clips at the top of the wheel.

What you have to do is use the hole to push the bottom clip which should release part of the airbag. There are no other holes to get to the other clips so you have to get to them through the gap you create when you release the first clip.

The major thing you have to notice is that the bottom clip (the one you get to through the hole) needs you to push the clip to release it, the other 2 need you to pull. I used a small ring-ended spanner to pull the other clips and release them.

Let me have a go in paint and try and illustrate what you need to do:

Step 1 - push the first pin through the hole with a flat screwdriver. It's the yellow arrow.

Step 2+3 - pull the far away end of the second and third clip towards you. These are circled red in the diagram (sorry about the cables being in the way on the photo of the lower clip but it's just the same as the upper one)