|
09-30-2010, 10:50 PM | #1 |
Drives: 07 yaris sedan Join Date: Sep 2010
Location: edmonton
Posts: 3
|
Engine sounds sick=(! help
Hi guys, I am new to this forum. I own a 07 yaris (sedan). I havent had too many issues before this...but i need your help now.
When I drive, my engine sounds like its revving way higher than it is. My boyfriend says its more like a vibrating sound that gets higher as the speed gets higher. He says it doesnt matter what gear its in. He also says the sound ..sounds like its coming from the front wheel area. Its kind of scary, I feel like the engine will blow any second as I do alot of highway driving to and from work. When I go up to 120, the car sounds soooo loud its crazy. to me, it doesnt sound that bad when I am in residential and going like...40. but anything after that it starts going all crazy. Sorry im not good at explaining sounds or mechanical problems but if it sounds like something any of you have experienced advice would be super helpful! Thanks, Jenny =) |
09-30-2010, 10:54 PM | #2 | |
Drives: 2005 Toyota Echo Join Date: Sep 2010
Location: Hamilton, Canada
Posts: 259
|
Quote:
Does the noise change with engine speed (R.P.M) or with vehicle speed? It almost sounds like a bad wheel bearing if I understand correctly. Hope this helps, and welcome
__________________
05' Echo Hatch - Greddy Supercharger - rear disc |
|
09-30-2010, 10:58 PM | #3 |
Drives: 07 yaris sedan Join Date: Sep 2010
Location: edmonton
Posts: 3
|
The noise changes with vehicle speed. If I put the car in neutral as it is moving, the sound remains the same!
|
09-30-2010, 11:02 PM | #4 |
Drives: 2008 Yaris LB Join Date: Jul 2010
Location: PA
Posts: 899
|
Wheel bearing.
Is it a humming sound that gets loud on the highway? If so, bearing:)
__________________
"And that goes for any of you, never get put down from someone who gets jealous of you; build it and prove them wrong. There will always be haters and naysayers but those are also the ones who's cars are worth less than my seats." xbgod - 9/23/2010 |
09-30-2010, 11:07 PM | #5 |
Drives: 07 yaris sedan Join Date: Sep 2010
Location: edmonton
Posts: 3
|
Yep, sounds about right. I will replace those this weekend! Thanks both of you for you help!!
|
09-30-2010, 11:10 PM | #6 |
Drives: 2008 Yaris LB Join Date: Jul 2010
Location: PA
Posts: 899
|
Labor intensive,but the part should be cheap-ish.
__________________
"And that goes for any of you, never get put down from someone who gets jealous of you; build it and prove them wrong. There will always be haters and naysayers but those are also the ones who's cars are worth less than my seats." xbgod - 9/23/2010 |
09-30-2010, 11:22 PM | #7 |
Drives: 2005 Toyota Echo Join Date: Sep 2010
Location: Hamilton, Canada
Posts: 259
|
Are they still the same style as the echo that need to be pressed out?
Jenny- If so, you will need access to a hydraulic press to get them in/out of the hub. Should only be one of them that's gone bad. Easiest way to check is with a stethescope on a hoist.
__________________
05' Echo Hatch - Greddy Supercharger - rear disc |
10-01-2010, 01:16 PM | #8 |
I've made a post!
Drives: 07 yaris Join Date: Oct 2010
Location: Edmonton
Posts: 1
|
This may sound silly but: if someone were to DIY wheel bearing replacement and they didnt have access to a press - could you use some other method to get the bearings in/out? even if it's not the recommended way?
ie: lube up as much as you can and use blocks of wood + a vice and attempt to force the bearing back into the assembly that way? |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
The Nitrous Thread | ChinoCharles | Performance Modifications | 116 | 02-16-2016 03:07 PM |
A Mystery Oi'll Say! | Yar Is Word | Fuel Economy Forum | 16 | 05-11-2013 04:22 AM |
engine question... (2ZR-FE and 2ZZ-GE) | Avia | General Yaris / Vitz Discussion | 5 | 12-24-2010 08:16 AM |
Remote Engine Start PT398-33070 | Reeves360 | In Car Entertainment + Electronics (audio / video / alarm) | 3 | 08-26-2009 07:11 PM |
Gearbox/diff squeak, poor engine braking | Kiz | DIY / Maintenance / Service | 8 | 08-01-2009 09:35 AM |