Under $2500 Tubo Kit Update 2

[KSIbucky]

Originally Posted by joey1320

and greddy's kit is a supercharger kit not a turbo.

?

[joey1320]

Originally Posted by KSIbucky

?

oops sorry they do make a turbo kit for the xb. i talked to Tim Medina from Greddy's New Jersey headquarters and he said they only had a supercharger kit, but i just looked at their site and they do have turbo kit... sorry!

[Black Yaris]

I want to see a 200WHP Yaris

[Nexus1155]

holy upgraded internals black yaris... KABOOM!

[ddongbap]

200whp isn't that much.. I don't think..

B18s have already hit that. Seeing how this 1nz(or was it az? whatever the Yaris engine is) is a newer engine. I wouldn't think that it would be a big problem?

[Doc Zaius]

Originally Posted by ddongbap

200whp isn't that much.. I don't think..

B18s have already hit that. Seeing how this 1nz(or was it az? whatever the Yaris engine is) is a newer engine. I wouldn't think that it would be a big problem?

Hehhehh... do a little more reading about the 1NZ-FE, and you'll begin to understand why more than doubling the engine's power output might require some pretty serious work and upgrades!

[Black Yaris]

Originally Posted by Nexus1155

holy upgraded internals black yaris... KABOOM!

200 WHP is not all that unrealistic, on 6psi of boost, and totallaly doable on stock internals.... and ifmy car get's boosted and I smoke the engine do to too much power for the stock internals... Hell, I will a)completely rework a new motor sleave it and beef up the rest of the internals, slap a T3 and unleash some fury, or b)2zz swap.... and eventally boost that bitch too
My vote is A.... after talking to a few fellow members, I want to see what can be done with the 1NZ, lets push it till we can't push no more

[Black Yaris]

Originally Posted by Doc Zaius

Hehhehh... do a little more reading about the 1NZ-FE, and you'll begin to understand why more than doubling the engine's power output might require some pretty serious work and upgrades!

Axles...... LOTS AND LOTS of axles

[ddongbap]

Originally Posted by Black Yaris

Axles...... LOTS AND LOTS of axles

Is that it? Or is that bottom end really not so great? Maybe I should go do that 3SG swap some people have been talking about.

[Black Yaris]

you be the first to 3sgte your yaris, you will be God..... expecially if you are running a modded 3S.... on stock internals you can push the 350WHP range... yeah, insane, but I can pick up S3-GTE swaps (complete drivetrain with ECU) in the $2000 range with decent miles on them

[Nexus1155]

oooh you can probably cut down on the axles if you put on some full metal motor mounts... just rip the old ones out and put some metal discs in there from home depot... they do it on Sentra SE-Rs all the time because the motor causes too much wheel hop and breaks axles...

[Black Yaris]

solid mount the motor..... that is thought.... Hmm.. would Aluminum be strong enough? If not just have them bitches machined out of stainless

[joey1320]

200whp is not out of the question, as a lot of us know yaristurbo plut down 186whp to the wheels with a stock engine. the only worries will be the internals and axles.

i persoanlly think 200whp is too much at the moment with the lack of knowledge on these engines and ecu's. i plan on getting a spare engine soon and tearing it apart but the one thing i know from pulling down the metal "oil pan" is that the block is a not a normal one. it seems to have girdles as the Acura GSR's but machined onto the block...

sorry i didn't take pics of them. well if all works ok my wideband should be here next week and then i'll be finishing the turbo install and taking it to the dyno... wish me luck!

[redduck]

Originally Posted by Black Yaris

solid mount the motor..... that is thought.... Hmm.. would Aluminum be strong enough? If not just have them bitches machined out of stainless

your car would vibrate so much with a solid mount. you would he annoyed in an hour

[Black Yaris]

Originally Posted by redduck

your car would vibrate so much with a solid mount. you would he annoyed in an hour

I do not annoy easily..... I drove an s-10 that would bottom out on a pubic hair

[Nexus1155]

$4 down home depot for metal washer like rings 2 on eac side of mm and ur set ill look up the article in a min

[redduck]

Originally Posted by Black Yaris

I do not annoy easily..... I drove an s-10 that would bottom out on a pubic hair

I used to drive a body dropped dime, I know what you mean. I love me some mini-trucks

[cali yaris]

don't forget the work on the transmission.

My kit comes next week, and I'm going to start with stock internals -- we'll see what she makes. It's all on paper until someone commits and completes.