WTB: Scion Xd throttle body - Page 4 - Toyota Yaris Forums

YarisPR · 12-19-2008, 08:32 AM

yesterday I found one foe $55......... I might go back and grab it....

gwasabi · 12-19-2008, 04:05 PM

The corolla TB throws a CEL light. T-T i dunno y

FunctionSpec · 12-19-2008, 04:26 PM

Reset ECU and check make sure all the air bubbles are out of the coolant lines that go into the throttle body. Also check the connector the TB to make sure its on correctly.

Disconnect negative battery cable for a couple hours to completely reset the ECU. Usually leaving it disconnected overnight would be best.

gwasabi · 12-19-2008, 05:05 PM

how do i make sure all the air bubbles are out of the coolant lines?

I did reset the ECU though. it kinda like does this wierd thing when slowing down too. like it revs up then and down by itself. I dunno whats up with that but maybe I'll try reset ecu again

FunctionSpec · 12-19-2008, 05:25 PM

Yeah sounds like theres air in your coolant lines.

Once the car cools down, take off radiator cap. Turn on car and let it run at idle. Let it warm up. You'll see air bubbles bubbling out of the coolant. GENTLY squeeze the smaller coolant tubes in various areas to help push the rest of the air out. It'll be kinda hot so don't burn yourself. Keep doing until you see no more air bubbles coming out and your done.

PETERPOOP · 12-19-2008, 09:33 PM

Quote:

Originally Posted by YarisPR

yesterday I found one foe $55......... I might go back and grab it....

pick it up for me and i'll buy it from you if it's legit.

ztrack157 · 12-20-2008, 02:31 AM

I nabbed a corolla TB today for $45.00 plus shipping I want to see what this does. Peter I might sell it to you if I don't like it.

PETERPOOP · 12-20-2008, 03:22 PM

ah thanks for the offer, but i am wanting the xD throttle body,not the carolla.

YarisPR · 12-20-2008, 03:34 PM

I got a 05 Corolla TB and the instalation was clean, nice and easy. The car iddles normally but it won't go over 2000rpm.... What could be the problem?

anonymous user · 12-20-2008, 03:53 PM

Quote:

Originally Posted by YarisPR

I got a 05 Corolla TB and the instalation was clean, nice and easy. The car iddles normally but it won't go over 2000rpm.... What could be the problem?

Possible vacuum leak.

YarisPR · 12-20-2008, 04:12 PM

I just putted the intake just touching the TB I did't connect it. And as soon as I moved it a little the car turned off. I might have to try it with everything connected.

thebarber · 12-20-2008, 06:38 PM

what did you use for a gasket?

YarisPR · 12-20-2008, 07:03 PM

Quote:

Originally Posted by thebarber

what did you use for a gasket?

I just tooked out the Yaris TB and place the Corolla TB. Do I need something else? What gasket?
I think I'am doing something wrong..

thebarber · 12-20-2008, 08:36 PM

gwasabi · 12-22-2008, 03:51 AM

i didn't really need to use gasket in a tube for the tb install....works fine. also this mod is pretty awesome. you can feel the difference. more responsive in higher rpms and sounds hella awesome.

anonymous user · 12-23-2008, 09:08 PM

Quote:

Originally Posted by gwasabi

i didn't really need to use gasket in a tube for the tb install....works fine. also this mod is pretty awesome. you can feel the difference. more responsive in higher rpms and sounds hella awesome.

How easy was the install, and where did you get the TB?

gwasabi · 12-23-2008, 10:02 PM

got mine from barber. Install was SUPER easy. it goes right in. and just stick all the pipes back into the right places. took me about 30 min to install. shouldn't be too hard if you have aftermarket intake. If you have stock intake it might take u a little longer

AlexNet0 · 01-01-2009, 03:11 AM

i like the sound of this, lol

what is the size of the 1zz TB inlet compared to the 1nz? Would one need a different size intake tube for it, or would the rubber couplers for a CAI stretch over it neway?

12-19-2008, 08:32 AM	#55
YarisPR Drives: Yaris Sedan Join Date: Sep 2006 Location: MayaWest, Puerto Rico Posts: 1,574	yesterday I found one foe $55......... I might go back and grab it.... __________________ I Drive a 129whp Yaris ;)

12-20-2008, 03:34 PM	#63
YarisPR Drives: Yaris Sedan Join Date: Sep 2006 Location: MayaWest, Puerto Rico Posts: 1,574	I got a 05 Corolla TB and the instalation was clean, nice and easy. The car iddles normally but it won't go over 2000rpm.... What could be the problem? __________________ I Drive a 129whp Yaris ;)

12-20-2008, 04:12 PM	#65
YarisPR Drives: Yaris Sedan Join Date: Sep 2006 Location: MayaWest, Puerto Rico Posts: 1,574	I just putted the intake just touching the TB I did't connect it. And as soon as I moved it a little the car turned off. I might have to try it with everything connected. __________________ I Drive a 129whp Yaris ;)

12-20-2008, 06:38 PM	#66
thebarber daily driver View User's Garage Drives: the #wrecho Join Date: Jun 2006 Location: Grand Rapids, MI Posts: 5,877	what did you use for a gasket? __________________

12-20-2008, 08:36 PM	#68
thebarber daily driver View User's Garage Drives: the #wrecho Join Date: Jun 2006 Location: Grand Rapids, MI Posts: 5,877	__________________

12-19-2008, 04:05 PM	#56
gwasabi View User's Garage Drives: 07 Blazing Blue LB Join Date: Jun 2007 Location: Honolulu, Hawaii Posts: 692	The corolla TB throws a CEL light. T-T i dunno y

12-19-2008, 04:26 PM	#57
FunctionSpec Super Newbie View User's Garage Drives: 2007 Yaris Liftback White Join Date: Jul 2007 Location: 626, Southern California Posts: 180	Reset ECU and check make sure all the air bubbles are out of the coolant lines that go into the throttle body. Also check the connector the TB to make sure its on correctly. Disconnect negative battery cable for a couple hours to completely reset the ECU. Usually leaving it disconnected overnight would be best.

12-19-2008, 05:05 PM	#58
gwasabi View User's Garage Drives: 07 Blazing Blue LB Join Date: Jun 2007 Location: Honolulu, Hawaii Posts: 692	how do i make sure all the air bubbles are out of the coolant lines? I did reset the ECU though. it kinda like does this wierd thing when slowing down too. like it revs up then and down by itself. I dunno whats up with that but maybe I'll try reset ecu again

12-19-2008, 05:25 PM	#59
FunctionSpec Super Newbie View User's Garage Drives: 2007 Yaris Liftback White Join Date: Jul 2007 Location: 626, Southern California Posts: 180	Yeah sounds like theres air in your coolant lines. Once the car cools down, take off radiator cap. Turn on car and let it run at idle. Let it warm up. You'll see air bubbles bubbling out of the coolant. GENTLY squeeze the smaller coolant tubes in various areas to help push the rest of the air out. It'll be kinda hot so don't burn yourself. Keep doing until you see no more air bubbles coming out and your done.

12-20-2008, 02:31 AM	#61
ztrack157 Vroom Vroom Beep Beep View User's Garage Drives: Powered Roller Skate Join Date: Oct 2008 Location: Biggs, CA Posts: 404	I nabbed a corolla TB today for $45.00 plus shipping I want to see what this does. Peter I might sell it to you if I don't like it.

12-20-2008, 03:22 PM	#62
PETERPOOP View User's Garage Drives: 08 white liftback Join Date: Oct 2008 Location: Oahu Posts: 3,674	ah thanks for the offer, but i am wanting the xD throttle body,not the carolla.

12-22-2008, 03:51 AM	#69
gwasabi View User's Garage Drives: 07 Blazing Blue LB Join Date: Jun 2007 Location: Honolulu, Hawaii Posts: 692	i didn't really need to use gasket in a tube for the tb install....works fine. also this mod is pretty awesome. you can feel the difference. more responsive in higher rpms and sounds hella awesome.

12-23-2008, 10:02 PM	#71
gwasabi View User's Garage Drives: 07 Blazing Blue LB Join Date: Jun 2007 Location: Honolulu, Hawaii Posts: 692	got mine from barber. Install was SUPER easy. it goes right in. and just stick all the pipes back into the right places. took me about 30 min to install. shouldn't be too hard if you have aftermarket intake. If you have stock intake it might take u a little longer

01-01-2009, 03:11 AM	#72
AlexNet0 View User's Garage Drives: '07 Yaris 3dr Join Date: Nov 2008 Location: Rockland, ME Posts: 1,638	i like the sound of this, lol what is the size of the 1zz TB inlet compared to the 1nz? Would one need a different size intake tube for it, or would the rubber couplers for a CAI stretch over it neway? __________________ ---------- MI-YW ----------

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
WTB: Modellista body kit	Repofspeed	Items for Sale by private party	4	08-31-2007 01:43 AM
intake and throttle body Q	thebarber	Performance Modifications	3	08-20-2007 07:02 PM
Toyota Throttle Body Spacer: the Best Fuel-Saving Device	davidmills	Performance Modifications	1	07-01-2007 11:38 PM
Scion xD	Rudeshady	Central and South America	1	06-25-2007 01:11 PM
toyotafest 2007	esquiva	Photo-Video-Media Gallery	36	05-15-2007 12:03 PM