|
12-30-2018, 10:44 AM | #1 |
Drives: Yaris hatchback 06 Join Date: Nov 2018
Location: Montreal
Posts: 35
|
Penguin garage axle spacer
Search for a set or someone with draw of all measure to made one. Fors 06-07yaris
|
12-30-2018, 11:56 AM | #2 |
Drives: '08 2zr swapped Vios M/T Join Date: Oct 2012
Location: Caledonia Ont.
Posts: 2,938
|
If you can wait until the spring I will he selling my 10mm penguin spacers with camber washers.
I'm going to a wider 225 track tire and that wont fit with the 10mm spacers
__________________
No one ever wants to give a Yaris the point by... |
12-31-2018, 08:30 AM | #3 |
Drives: No longer own a yaris :( Join Date: Mar 2012
Location: Ashland, VA
Posts: 680
|
Are you just looking for slip-on spacers? If so there are a billion companies that sell them.
__________________
I'm a hermit named Lee |
12-31-2018, 06:09 PM | #4 |
Drives: Yaris hatchback 06 Join Date: Nov 2018
Location: Montreal
Posts: 35
|
Pm's tmontague
I run wheel spacer on all my car/truck. But couple years ago a made a set of axle spacer for my jetta mk2 and it so much better and on wheel bearing too |
01-03-2019, 11:12 PM | #5 |
found mine :P these are way too tight to fit hubs with abs. it really sucked removing these from my hub.
|
|
01-17-2019, 10:57 AM | #6 |
3 Yaris and counting..
Drives: 07 Yaris rs 3 door 2zr swaped Join Date: Feb 2016
Location: Toronto Canada
Posts: 672
|
If any Canadians are looking for a more local sale of their spacers, I'd be interested
__________________
No one suspects the Yaris. Xd/2zr-fe Swap/Build Thread http://www.yarisworld.com/forums/showthread.php?t=61427 Bolt-in 3.75" Suspension Lift Build Thread http://www.yarisworld.com/forums/showthread.php?t=61577 |
01-17-2019, 03:59 PM | #7 | |
Drives: 06 2ZR Turbo Yaris RS Join Date: Aug 2017
Location: Fredericton, New Brunswick, Canada
Posts: 2,384
|
Quote:
Now you've got me wondering...does my '06 have ABS? Haha. The install was a while ago.
__________________
2006 Yaris 5 Door RS 2ZR-FE (2011 Corolla 1.8L) Swapped, Automatic, T-28 Turbocharged (8 psi), HSD MonoPro Coilovers, DIY W/M Injection, custom 3" cold air intake, custom 2.5" exhaust, TRD rear sway bar, Penguin Garage 13mm spacers (rear), custom Civic front lip, full repaint, Android 6.0 7" touchscreen, Rockford Fosgate speakers, tweeters, NVX underseat subwoofer https://www.instagram.com/2zr_turbo_yarisrs/ |
|
01-17-2019, 10:46 PM | #8 |
go slam your brakes and report back lol
|
|
01-18-2019, 05:57 AM | #9 |
Drives: 06 2ZR Turbo Yaris RS Join Date: Aug 2017
Location: Fredericton, New Brunswick, Canada
Posts: 2,384
|
- a valid test for sure. However, since it's still up on stands with the front torn off, I'll look for the sensors. LOL.
__________________
2006 Yaris 5 Door RS 2ZR-FE (2011 Corolla 1.8L) Swapped, Automatic, T-28 Turbocharged (8 psi), HSD MonoPro Coilovers, DIY W/M Injection, custom 3" cold air intake, custom 2.5" exhaust, TRD rear sway bar, Penguin Garage 13mm spacers (rear), custom Civic front lip, full repaint, Android 6.0 7" touchscreen, Rockford Fosgate speakers, tweeters, NVX underseat subwoofer https://www.instagram.com/2zr_turbo_yarisrs/ |
01-18-2019, 11:45 AM | #10 |
3 Yaris and counting..
Drives: 07 Yaris rs 3 door 2zr swaped Join Date: Feb 2016
Location: Toronto Canada
Posts: 672
|
I've had to use a slide hammer every time to get the rear hubs out.
__________________
No one suspects the Yaris. Xd/2zr-fe Swap/Build Thread http://www.yarisworld.com/forums/showthread.php?t=61427 Bolt-in 3.75" Suspension Lift Build Thread http://www.yarisworld.com/forums/showthread.php?t=61577 |
01-18-2019, 12:08 PM | #11 |
Drives: '08 2zr swapped Vios M/T Join Date: Oct 2012
Location: Caledonia Ont.
Posts: 2,938
|
I opted for the air chisel when I had to remove them to install the spacers. Now I never have any issues since everything is covered in anti seize. If only the factory would do the same...
__________________
No one ever wants to give a Yaris the point by... |
03-20-2019, 07:13 PM | #12 |
Drives: Yaris hatchback 06 Join Date: Nov 2018
Location: Montreal
Posts: 35
|
In search again!
|
03-20-2019, 07:15 PM | #13 |
Drives: Yaris hatchback 06 Join Date: Nov 2018
Location: Montreal
Posts: 35
|
Or someone he's able tho draw/template exactly on sheet and mail for a made custom one. I dont have old/scrap bearing to take measure
|
03-24-2019, 06:35 PM | #14 |
https://imgur.com/a/eotSAt7 on regular 8 1/2 x 11 :P
|
|
03-28-2019, 08:47 AM | #15 |
Drives: Yaris hatchback 06 Join Date: Nov 2018
Location: Montreal
Posts: 35
|
Alrigth thank! I print it and try the template!
|
03-28-2019, 12:35 PM | #16 |
Drives: 06 2ZR Turbo Yaris RS Join Date: Aug 2017
Location: Fredericton, New Brunswick, Canada
Posts: 2,384
|
I think this will make many people happy!
__________________
2006 Yaris 5 Door RS 2ZR-FE (2011 Corolla 1.8L) Swapped, Automatic, T-28 Turbocharged (8 psi), HSD MonoPro Coilovers, DIY W/M Injection, custom 3" cold air intake, custom 2.5" exhaust, TRD rear sway bar, Penguin Garage 13mm spacers (rear), custom Civic front lip, full repaint, Android 6.0 7" touchscreen, Rockford Fosgate speakers, tweeters, NVX underseat subwoofer https://www.instagram.com/2zr_turbo_yarisrs/ |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
TRD Delrin Rear Axle Bushing Collars | tmontague | Wheels, Tires and Suspension Forum sponsored by The Tire Rack | 4 | 12-15-2019 07:50 PM |
WTB Penguin Garage Hub Spacer | Hoang2zz | Willing to Buy by private party | 0 | 06-25-2018 02:25 PM |
New Product: Penguin Garage Rear Camber Shims! | Penguin Garage | Penguin Garage | 11 | 10-22-2009 10:20 PM |
Penguin Garage Rear Hub Spacers!! | Penguin Garage | Sponsors Classifieds Area | 92 | 09-02-2009 06:16 PM |
Penguin Garage Rear Hub Spacer Raffle!! | Penguin Garage | General Yaris / Vitz Discussion | 27 | 06-30-2009 01:05 AM |