Aftermarket exhaust options for a 2016 SE? - Toyota Yaris Forums

ncp131_kai · 10-04-2022, 09:55 PM

Wanting to get an aftermarket exhaust for my 2016, SE 5dr, looking for recommendations to which one will fit

I’ve came across two, one is the The Revel Medallion Touring-S but states it excludes the SE trim from compatibility.

The only other one that may fit is the Blitz Nur VS but not sure if it’ll fit due to the reverse light in the center of the rear bumper.

WeeYari · 10-05-2022, 11:22 AM

Since I don't believe there is any difference in the rear bumper facia on the SE, the Revel should fit, and they didn't bother testing it. In prior model years, the rear bumper had a lip installed which would make slight contact with the tip. Easily rectified with slightly longer exhaust hangers.

ncp131_kai · 10-05-2022, 11:38 AM

Quote:

Originally Posted by WeeYari

Since I don't believe there is any difference in the rear bumper facia on the SE, the Revel should fit, and they didn't bother testing it. In prior model years, the rear bumper had a lip installed which would make slight contact with the tip. Easily rectified with slightly longer exhaust hangers.

Sweet! I wasn’t looking forward to that Japan shipping, I’ll order the Revel one. Thank you

WeeYari · 10-05-2022, 12:10 PM

Oh man, am I going to feel like shit if for some reason it just won't work! Can't see it, but all the best.

mitch9521 · 10-06-2022, 04:16 PM

I have a Fujitsubo Authorize RM on my 2014, fits like a glove.

2015+ Yaris all share tailpipes and mufflers, 2012-2014 SE models had the chrome tip and slight S-bend which made them exit a little further to the right.

Neinris · 10-14-2022, 09:53 AM

I have a 2008 HB, and the Tanabe Medallion exhaust. The only thing I'm a little disappointed about is that there's a choke point at the flange:

But as you can see, even when my rear axle frame is using the top holes to mount, there's plenty of clearance for the piping to not hit the axle frame, it's made for lowered Yaris'.

When I finally do the 2ZR swap I'll have that choke point fixed.

10-04-2022, 09:55 PM	#1
ncp131_kai Drives: 2016 Toyota Yaris SE Join Date: Sep 2022 Location: San Diego, CA Posts: 4	Aftermarket exhaust options for a 2016 SE? Wanting to get an aftermarket exhaust for my 2016, SE 5dr, looking for recommendations to which one will fit I’ve came across two, one is the The Revel Medallion Touring-S but states it excludes the SE trim from compatibility. The only other one that may fit is the Blitz Nur VS but not sure if it’ll fit due to the reverse light in the center of the rear bumper.

10-05-2022, 11:22 AM	#2
WeeYari View User's Garage Drives: 06 Polar White 5dr, 13 Soul 4u Join Date: Oct 2008 Location: Georgetown, Ontario, Canada Posts: 5,740	Since I don't believe there is any difference in the rear bumper facia on the SE, the Revel should fit, and they didn't bother testing it. In prior model years, the rear bumper had a lip installed which would make slight contact with the tip. Easily rectified with slightly longer exhaust hangers. __________________

10-05-2022, 12:10 PM	#4
WeeYari View User's Garage Drives: 06 Polar White 5dr, 13 Soul 4u Join Date: Oct 2008 Location: Georgetown, Ontario, Canada Posts: 5,740	Oh man, am I going to feel like shit if for some reason it just won't work! Can't see it, but all the best. __________________

10-06-2022, 04:16 PM	#5
mitch9521 Gen 3 > Gen 2 Drives: NCP131, F-150 Join Date: Jul 2019 Location: Red Deer, AB Posts: 497	I have a Fujitsubo Authorize RM on my 2014, fits like a glove. 2015+ Yaris all share tailpipes and mufflers, 2012-2014 SE models had the chrome tip and slight S-bend which made them exit a little further to the right. __________________ 2014 NCP131 5 Speed 2007 F150 4.2L 5 Speed 2013 Rav4 LE AWD Autotragic - Wife's

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Exhaust Manifold to Pipe Donut Gasket	yarisinpa	DIY / Maintenance / Service	1	06-29-2017 03:35 AM
Enkei's and Dunlops + Medalion Touring Exhaust	2manywheels	Items for Sale by private party	40	04-04-2011 05:01 PM
aftermarket exhaust	mark7337	Performance Modifications	2	05-08-2009 11:51 AM
Intake & Exhaust Options for '07 Sedan	hurstnova350	Performance Modifications	11	09-12-2007 11:10 PM
canadian yaris options for exhaust	SimmZ	Performance Modifications	14	07-24-2007 03:51 PM

10-14-2022, 09:53 AM	#6
Neinris View User's Garage Drives: 08 Yaris 3 Door Hatchback Join Date: Aug 2019 Location: ‘Murica! Posts: 446	I have a 2008 HB, and the Tanabe Medallion exhaust. The only thing I'm a little disappointed about is that there's a choke point at the flange: But as you can see, even when my rear axle frame is using the top holes to mount, there's plenty of clearance for the piping to not hit the axle frame, it's made for lowered Yaris'. When I finally do the 2ZR swap I'll have that choke point fixed.