xB Ported Throttle Body & 1zz cable driven TB - Toyota Yaris Forums

H3LlIoN · 01-26-2011, 12:35 AM

It's spring cleaning time...I have too much stuff. These throttle bodies are not USDM yaris compliant out of the box.

The 1zz tb is cable driven...big as hell, and *would* be the equivalent swap for an xB motor, except a flange or adapter would be needed to mate it to an existing 1nz DBC intake mani. It's huge though, and should flow well. As is...unsure if sensors work or not. $100 shipped ContUSA - OBO

#2 is a ported and polished Bullfrog throttle body by Gude. He charges like $250 for these, IIRC. Basically, what's done is that it's taken apart, bored out...larger butterfly is machined, reassembled. This is a direct bolt on for the 1nz DBC intake mani, whether it be xB or *otherworldly* yaris/echo/vitz/etc. I know there is a lot of attention concerning Gude lately and the extreme turbo stuff a member here had built, but the truth is my car runs great and I no longer have top end drop off like I did with factory equipment. The only reason I have this is because I sent him an xB TB as a core with the head thinking that I would be able to swap to DBC after the fact. Basically, I hadn't done any research. Tisk tisk. It's doing me no good, so it's up. $150 shipped ContUSA - obo

The red in the pics is the gasket stuff Gude uses to test his butterflys...it will all be gone by the time you get the TB.

johnny_vitz · 01-29-2011, 04:15 PM

For #2 - is the bore of the t.b larger than stock? It almost looks like oem size from the rear

H3LlIoN · 02-02-2011, 12:09 AM

yes, it's larger than stock. Both of these will fit on xB's, echos, and other-worldly (non-USDM) yarii.

johnny_vitz · 02-03-2011, 11:47 PM

Quote:

Originally Posted by H3LlIoN

yes, it's larger than stock. Both of these will fit on xB's, echos, and other-worldly (non-USDM) yarii.

Can you give me a measurement in mm of both sides of #2, does it come with the I.A.C?

The other t.b is a four bolt and I don't think it will work on the first gen xb or echo's (3 bolt)

H3LlIoN · 02-04-2011, 09:01 PM

A) Yes, I can, although I don't have a caliper right now, so it'll be a couple days.

B) Correct, you would have to make an adapter if you wanted to use it, but it's 60mm as opposed to 54 of the stock tb.

johnny_vitz · 02-05-2011, 12:20 AM

cool, thanks. Just post em up when you can

johnny_vitz · 02-09-2011, 11:35 PM

bump ... any luck with the caliper? and are you including the IAC?

H3LlIoN · 02-11-2011, 10:09 AM

I am including what is pictured. I still can't find my calipers...I have class today but I'll just pick another set up on the way back. Sry for the delay.

H3LlIoN · 02-12-2011, 01:52 PM

Dude. I went to 3 different stores here today and nobody had a decent caliper for sale. They all wanted $30 for digital crap. I'll be "near town" tomorrow and I'll grab a set. Haven't forgotten about you though.

ANTuno · 02-23-2011, 07:36 PM

Will you ship #2 to 00646 - PR?

johnny_vitz · 03-06-2011, 10:26 PM

Any luck with measurements?

01-26-2011, 12:35 AM	#1
H3LlIoN View User's Garage Drives: '09 Yarrrr hatch Join Date: Aug 2009 Location: Midatlantic Posts: 727	xB Ported Throttle Body & 1zz cable driven TB It's spring cleaning time...I have too much stuff. These throttle bodies are not USDM yaris compliant out of the box. The 1zz tb is cable driven...big as hell, and would be the equivalent swap for an xB motor, except a flange or adapter would be needed to mate it to an existing 1nz DBC intake mani. It's huge though, and should flow well. As is...unsure if sensors work or not. $100 shipped ContUSA - OBO #2 is a ported and polished Bullfrog throttle body by Gude. He charges like $250 for these, IIRC. Basically, what's done is that it's taken apart, bored out...larger butterfly is machined, reassembled. This is a direct bolt on for the 1nz DBC intake mani, whether it be xB or otherworldly yaris/echo/vitz/etc. I know there is a lot of attention concerning Gude lately and the extreme turbo stuff a member here had built, but the truth is my car runs great and I no longer have top end drop off like I did with factory equipment. The only reason I have this is because I sent him an xB TB as a core with the head thinking that I would be able to swap to DBC after the fact. Basically, I hadn't done any research. Tisk tisk. It's doing me no good, so it's up. $150 shipped ContUSA - obo The red in the pics is the gasket stuff Gude uses to test his butterflys...it will all be gone by the time you get the TB. __________________ Toyota Moving Forward ...even when you don't want it to. Special thanks to Cali Yaris, 1NZYaris1 and lilredrocket

02-02-2011, 12:09 AM	#3
H3LlIoN View User's Garage Drives: '09 Yarrrr hatch Join Date: Aug 2009 Location: Midatlantic Posts: 727	yes, it's larger than stock. Both of these will fit on xB's, echos, and other-worldly (non-USDM) yarii. __________________ Toyota Moving Forward ...even when you don't want it to. Special thanks to Cali Yaris, 1NZYaris1 and lilredrocket

02-04-2011, 09:01 PM	#5
H3LlIoN View User's Garage Drives: '09 Yarrrr hatch Join Date: Aug 2009 Location: Midatlantic Posts: 727	A) Yes, I can, although I don't have a caliper right now, so it'll be a couple days. B) Correct, you would have to make an adapter if you wanted to use it, but it's 60mm as opposed to 54 of the stock tb. __________________ Toyota Moving Forward ...even when you don't want it to. Special thanks to Cali Yaris, 1NZYaris1 and lilredrocket

02-05-2011, 12:20 AM	#6
johnny_vitz Drives: 2005 Toyota Echo Join Date: Sep 2010 Location: Hamilton, Canada Posts: 259	cool, thanks. Just post em up when you can __________________ 05' Echo Hatch - Greddy Supercharger - rear disc

02-09-2011, 11:35 PM	#7
johnny_vitz Drives: 2005 Toyota Echo Join Date: Sep 2010 Location: Hamilton, Canada Posts: 259	bump ... any luck with the caliper? and are you including the IAC? __________________ 05' Echo Hatch - Greddy Supercharger - rear disc

01-29-2011, 04:15 PM	#2
johnny_vitz Drives: 2005 Toyota Echo Join Date: Sep 2010 Location: Hamilton, Canada Posts: 259	For #2 - is the bore of the t.b larger than stock? It almost looks like oem size from the rear __________________ 05' Echo Hatch - Greddy Supercharger - rear disc

02-11-2011, 10:09 AM	#8
H3LlIoN View User's Garage Drives: '09 Yarrrr hatch Join Date: Aug 2009 Location: Midatlantic Posts: 727	I am including what is pictured. I still can't find my calipers...I have class today but I'll just pick another set up on the way back. Sry for the delay. __________________ Toyota Moving Forward ...even when you don't want it to. Special thanks to Cali Yaris, 1NZYaris1 and lilredrocket

02-12-2011, 01:52 PM	#9
H3LlIoN View User's Garage Drives: '09 Yarrrr hatch Join Date: Aug 2009 Location: Midatlantic Posts: 727	Dude. I went to 3 different stores here today and nobody had a decent caliper for sale. They all wanted $30 for digital crap. I'll be "near town" tomorrow and I'll grab a set. Haven't forgotten about you though. __________________ Toyota Moving Forward ...even when you don't want it to. Special thanks to Cali Yaris, 1NZYaris1 and lilredrocket

02-23-2011, 07:36 PM	#10
ANTuno I've made a post! Drives: 09Yaris+06XB Join Date: Feb 2011 Location: ((((((PR)))))) Posts: 1	Will you ship #2 to 00646 - PR?

03-06-2011, 10:26 PM	#11
johnny_vitz Drives: 2005 Toyota Echo Join Date: Sep 2010 Location: Hamilton, Canada Posts: 259	Any luck with measurements? __________________ 05' Echo Hatch - Greddy Supercharger - rear disc

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
1zz Throttle Body - what needs to be done to it	kac	Performance Modifications	25	11-20-2018 06:13 PM
Installed the 1zz throttle body -	AlexNet0	DIY / Maintenance / Service	135	08-01-2014 07:57 AM
Intake to match the 1ZZ throttle body	fuji	DIY / Maintenance / Service	2	06-17-2009 10:02 PM
Intake for the 1ZZ throttle body?	fuji	Performance Modifications	9	06-14-2009 12:02 AM
For Sale: 1ZZ Throttle Body and 0.25" aluminum wheel spacers	m911gt	Items for Sale by private party	6	04-25-2009 08:52 PM