|
01-26-2011, 12:35 AM | #1 |
xB Ported Throttle Body & 1zz cable driven TB
It's spring cleaning time...I have too much stuff. These throttle bodies are not USDM yaris compliant out of the box.
The 1zz tb is cable driven...big as hell, and *would* be the equivalent swap for an xB motor, except a flange or adapter would be needed to mate it to an existing 1nz DBC intake mani. It's huge though, and should flow well. As is...unsure if sensors work or not. $100 shipped ContUSA - OBO #2 is a ported and polished Bullfrog throttle body by Gude. He charges like $250 for these, IIRC. Basically, what's done is that it's taken apart, bored out...larger butterfly is machined, reassembled. This is a direct bolt on for the 1nz DBC intake mani, whether it be xB or *otherworldly* yaris/echo/vitz/etc. I know there is a lot of attention concerning Gude lately and the extreme turbo stuff a member here had built, but the truth is my car runs great and I no longer have top end drop off like I did with factory equipment. The only reason I have this is because I sent him an xB TB as a core with the head thinking that I would be able to swap to DBC after the fact. Basically, I hadn't done any research. Tisk tisk. It's doing me no good, so it's up. $150 shipped ContUSA - obo The red in the pics is the gasket stuff Gude uses to test his butterflys...it will all be gone by the time you get the TB.
__________________
Toyota Moving Forward ...even when you don't want it to. Special thanks to Cali Yaris, 1NZYaris1 and lilredrocket
|
|
01-29-2011, 04:15 PM | #2 |
Drives: 2005 Toyota Echo Join Date: Sep 2010
Location: Hamilton, Canada
Posts: 259
|
For #2 - is the bore of the t.b larger than stock? It almost looks like oem size from the rear
__________________
05' Echo Hatch - Greddy Supercharger - rear disc |
02-02-2011, 12:09 AM | #3 |
yes, it's larger than stock. Both of these will fit on xB's, echos, and other-worldly (non-USDM) yarii.
__________________
Toyota Moving Forward ...even when you don't want it to. Special thanks to Cali Yaris, 1NZYaris1 and lilredrocket
|
|
02-03-2011, 11:47 PM | #4 | |
Drives: 2005 Toyota Echo Join Date: Sep 2010
Location: Hamilton, Canada
Posts: 259
|
Quote:
The other t.b is a four bolt and I don't think it will work on the first gen xb or echo's (3 bolt)
__________________
05' Echo Hatch - Greddy Supercharger - rear disc |
|
02-04-2011, 09:01 PM | #5 |
A) Yes, I can, although I don't have a caliper right now, so it'll be a couple days.
B) Correct, you would have to make an adapter if you wanted to use it, but it's 60mm as opposed to 54 of the stock tb.
__________________
Toyota Moving Forward ...even when you don't want it to. Special thanks to Cali Yaris, 1NZYaris1 and lilredrocket
|
|
02-05-2011, 12:20 AM | #6 |
Drives: 2005 Toyota Echo Join Date: Sep 2010
Location: Hamilton, Canada
Posts: 259
|
cool, thanks. Just post em up when you can
__________________
05' Echo Hatch - Greddy Supercharger - rear disc |
02-09-2011, 11:35 PM | #7 |
Drives: 2005 Toyota Echo Join Date: Sep 2010
Location: Hamilton, Canada
Posts: 259
|
bump ... any luck with the caliper? and are you including the IAC?
__________________
05' Echo Hatch - Greddy Supercharger - rear disc |
02-11-2011, 10:09 AM | #8 |
I am including what is pictured. I still can't find my calipers...I have class today but I'll just pick another set up on the way back. Sry for the delay.
__________________
Toyota Moving Forward ...even when you don't want it to. Special thanks to Cali Yaris, 1NZYaris1 and lilredrocket
|
|
02-12-2011, 01:52 PM | #9 |
Dude. I went to 3 different stores here today and nobody had a decent caliper for sale. They all wanted $30 for digital crap. I'll be "near town" tomorrow and I'll grab a set. Haven't forgotten about you though.
__________________
Toyota Moving Forward ...even when you don't want it to. Special thanks to Cali Yaris, 1NZYaris1 and lilredrocket
|
|
02-23-2011, 07:36 PM | #10 |
I've made a post!
Drives: 09Yaris+06XB Join Date: Feb 2011
Location: ((((((PR))))))
Posts: 1
|
Will you ship #2 to 00646 - PR?
|
03-06-2011, 10:26 PM | #11 |
Drives: 2005 Toyota Echo Join Date: Sep 2010
Location: Hamilton, Canada
Posts: 259
|
Any luck with measurements?
__________________
05' Echo Hatch - Greddy Supercharger - rear disc |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
1zz Throttle Body - what needs to be done to it | kac | Performance Modifications | 25 | 11-20-2018 06:13 PM |
Installed the 1zz throttle body - | AlexNet0 | DIY / Maintenance / Service | 135 | 08-01-2014 07:57 AM |
Intake to match the 1ZZ throttle body | fuji | DIY / Maintenance / Service | 2 | 06-17-2009 10:02 PM |
Intake for the 1ZZ throttle body? | fuji | Performance Modifications | 9 | 06-14-2009 12:02 AM |
For Sale: 1ZZ Throttle Body and 0.25" aluminum wheel spacers | m911gt | Items for Sale by private party | 6 | 04-25-2009 08:52 PM |