fog light hook up engine side?, otheriwse finished

[sh0rtlife]

did a bunch of testing yesterday

2 things

#1 with the stalk, you have to add a ground wire to the far right "tiny" hole on the column plug
#2 the engine side fuse box "feed" wire holes are the left front side plug top right side holes...the one with just a bunch of green wires in it

done..everything works as intended ....now i need to track down power windows

[mannycheckers]

Attached is a PDF that I saved when I was installing my fog lights.

I ended up splicing two OEM terminals (PN: 82998-12340) to my fog light wiring kit for compatibility with the engine side wire harness. I got them from here: https://www.ebay.com/itm/193350436215

[sh0rtlife]

Originally Posted by mannycheckers

Attached is a PDF that I saved when I was installing my fog lights.

I ended up splicing two OEM terminals (PN: 82998-12340) to my fog light wiring kit for compatibility with the engine side wire harness. I got them from here: https://www.ebay.com/itm/193350436215

the only addition i see needed for said PDF is that atleast for an 07, you need to add a ground wire to the stalk harness on the far right top 2 slot area the tiny pin...the single all by itself over there, the other 2 on the other end on the top are also for the fog, they give feedback to the ecu, the ground is required to actualy get the fogs to fire

[TommyWasabi]

Originally Posted by sh0rtlife

did a bunch of testing yesterday

2 things

#1 with the stalk, you have to add a ground wire to the far right "tiny" hole on the column plug
#2 the engine side fuse box "feed" wire holes are the left front side plug top right side holes...the one with just a bunch of green wires in it

done..everything works as intended ....now i need to track down power windows

When you say "column plug" are you talking about the column wiring harness? Also where did you ground to, I haven't looked under the dash yet to find a good spot, I figured I would you first.

[brownnick]

Originally Posted by TommyWasabi

When you say "bitcoin otc trading" are you talking about the column wiring fantasy miniature game? Also where did you ground to, I haven't looked under the dash yet to find a good spot, I figured I would you first.

amazing, thanks to you both

regards

[ElMagnifico]

Is the harness for the dash button also used for the stalk? I just bought a stalk and wanna make sure i get the correct harness.

[sh0rtlife]

Originally Posted by ElMagnifico

Is the harness for the dash button also used for the stalk? I just bought a stalk and wanna make sure i get the correct harness.

NO, but you "can" make them work together if you really want to....but honestly go the stalk route its less prone to fail