![]() |
![]()
![]() |
![]() |
#1 |
![]() Drives: Toyota Vios 2008 Join Date: Oct 2008
Location: Kuala Lumpur Malaysia
Posts: 26
|
How To Smoked Sedan Headlight -DIY
GUys,
I believe i already post this before, but seems our forums has been hacked..then it was gone. I post it again for your viewing pleasure..hehe Pic Before ![]() Pic After ![]() Tools Needed 1. ABRO High Temp Flat Black - RM17.90 2. High Temp Clear Sealant - RM6.00 3. Orange Sticker - RM8.00 4. Hair Dryer 5. 10mm Socket Spanner 6. Philips Screwdriver 7. Scissors ![]() ![]() And The Process Begin.. Firstly, we have to unscrew 6 bolts below bumper and 6 clips on top of grill. ![]() The clips. ![]() Unscrew this bolts. Then u have to take out the bumper a bit. ![]() more than enough.. Then, unscrew the headlight screw (3). Then u should able to take out the headlight easily. ![]() Lucky my brother able to help me a bit. ![]() ![]() there u go.. meanwhile.. ![]() ![]() Then, use Hair Dryer to heat up the headlight original glue/sealant. ![]() ![]() Then carefully take out the housing. Macam kupas durian da.. ![]() Remember to take out those two bulbs also. ![]() Headlight has been dismantled.. ![]() ![]() Then, gently remove those 3 tiny scre at the back of the headlight cover. ![]() ![]() Tadaaaaaa... ![]() take off everything.. ![]() Now the spraying process. ![]() ![]() can u spot the differences.. ![]() ![]() now..leave the paint to dry, go get the sticker. after done doing some outline drawing, cut the sticker... ![]() ![]() ![]() then just fix the sticker at the lens cover. sorry no pics for this part! Then, go back to the headlight cover. fix it back to the headlight unit, i make it 4 layer. ![]() ![]() Heat the sealant back in order to fix the headlight unit. once again, hair dryer please.. ![]() ![]() Using sealant to make it seal properly. and leave it to dry for about 15 minutes time. ![]() now..attached the headlight unit back to its original place..there you go. ![]() remember to fix all the screw, bolts and clips...then walllllaaaaaa.. ![]() ![]() ![]() ![]() ![]() |
![]() |
![]() |
![]() |
#2 |
やりすぎだ~
|
Great DIY! It looks very clean and professionally done.
It's funny how USA wants all-clear headlights while Asian countries prefer headlights with amber signals. |
![]() |
![]() |
![]() |
#3 |
![]() Drives: 2 Yairs Sedan Join Date: Nov 2008
Location: egypt
Posts: 19
|
Great work :D i love the turn signals :D
|
![]() |
![]() |
![]() |
#4 | |
![]() ![]() ![]() ![]() ![]() ![]() |
Quote:
And it's so true about the americans wanting no amber turn signal markers!! I hate mine. I can't believe you put one in yours! hahah, oh wells Good job ![]() |
|
![]() |
![]() |
![]() |
#5 |
vroom vroom
Drives: lil red 5-door Join Date: Sep 2006
Location: Bangkok, Thailand
Posts: 7,744
|
everybody wants what they don't have
![]() Very nice DIY, thanks! Peter, about the oven, not very many houses in this part of the world actually have one... It's just not really used in asian cooking... I doubt you could wok the headlights ![]()
__________________
The price of freedom of religion, or of speech, or of the press, is that we must put up with a good deal of rubbish. - Robert Jackson ![]() Bye bye 1NZ... |
![]() |
![]() |
![]() |
#6 |
![]() ![]() ![]() ![]() ![]() ![]() Drives: 08 Yaris Sedan Join Date: Oct 2008
Location: California - Bay Area
Posts: 2,773
|
Dang i was planning on doing this eventually thanks for the in depth diy glad to see its simpler than i expected. I guess i will do this when i have to remove my bumper to install my grill.
__________________
|
![]() |
![]() |
![]() |
#7 |
Banned
Drives: yw calls me douche and racist. Join Date: Aug 2007
Location: hay
Posts: 2,183
|
Dope work bro, but this is black housing, not smoking a headlight.
Bad example, but this is a smoked headlight. ![]() |
![]() |
![]() |
![]() |
#8 |
![]() ![]() ![]() ![]() ![]() |
|
![]() |
![]() |
![]() |
#9 |
![]() ![]() ![]() ![]() ![]() Drives: '08 Yaris Sedan, Aero Package Join Date: Oct 2008
Location: Burlington, Ontario, Canada
Posts: 1,720
|
What oven temp. can they tolerate?
__________________
TRD Upgrades: 18" Wheels wrapped in 215/35/18 PZero's, Sportivo Shocks/Struts, Lowering Springs, Swaybar, Axle-Back Exhaust, Oil Cap, Rad Cap, Signage. Aftermarket Goodies: Piggies SS, K&N Drop-In, Blitz S/C, DC Header, NST Pulley) Toyota Options/Accessories: Sport Pedal Covers, Sport Shift Knob, Ipod Interface, Summer Mats, Winter Mats, Cruise Control, Auto-Dim Mirror, Echo steelies with winter boots. ![]() |
![]() |
![]() |
![]() |
#10 |
やりすぎだ~
|
Usually about 200 degress F for 1- 1.5 minutes. Too long and it will melt and get too hot to handle.
If you put it in the oven, don't forget to place a piece of wood in the middle to support it so the ends don't touch the oven rack. I once made that mistake of just laying it directly on the rack... I think the hair dryer/ heat gun might be a good approach. Either way, it's difficult to initially pry it open, but once you have a good gap, it's not so bad. |
![]() |
![]() |
![]() |
#11 |
![]() ![]() ![]() Drives: 08 Yaris Join Date: Oct 2008
Location: Vancouver, BC
Posts: 365
|
I did the same thing, but mine is white housing..lol
__________________
RIP Yaris, I will miss your superb handling a lot. darkmoon87's picture thread http://www.yarisworld.com/forums/showthread.php?t=10013 |
![]() |
![]() |
![]() |
#12 |
are u still 34/39?
Drives: flint mica yaris s sedan Join Date: Sep 2006
Location: bergen county, nj, us
Posts: 145
|
i think the orange is hot but is blacking out of the housing improve light projection for let's say an HID upgrade? or is it purely for cosmetic/looks?
don't get me wrong, they look beautiful afterwards- very tempting specially if the change has any lighting improvement |
![]() |
![]() |
![]() |
#13 |
Joey
Drives: '14 Scion xD 5-speed Join Date: Oct 2008
Location: El Monte, Ca
Posts: 3,529
|
He only painted the shell of the housing and not the inner reflective cone, so light projection wouldn't be effected
![]()
__________________
Formerly owned Met-Met. '07 Yaris LB 5-speed. A forum post should be like a skirt: Long enough to cover the subject but short enough to keep things interesting. "I don't have an anger problem. I have an idiot problem." -Hank Hill |
![]() |
![]() |
![]() |
#14 |
are u still 34/39?
Drives: flint mica yaris s sedan Join Date: Sep 2006
Location: bergen county, nj, us
Posts: 145
|
still tempting, damn. they're a nice job
|
![]() |
![]() |
![]() |
#15 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 07 Yaris Turbo Join Date: May 2007
Location: Canoga Park, CA
Posts: 14,859
|
awesome DIY -- 300% improvement
__________________
Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific. |
![]() |
![]() |
![]() |
#16 |
![]() ![]() ![]() |
i love it...i want to leave work right now and do that to my car!!
|
![]() |
![]() |
![]() |
#17 |
are u still 34/39?
Drives: flint mica yaris s sedan Join Date: Sep 2006
Location: bergen county, nj, us
Posts: 145
|
|
![]() |
![]() |
![]() |
#18 |
![]() ![]() Drives: 2007 Toyota Yaris Sedan Join Date: Feb 2009
Location: Orlando, USA
Posts: 73
|
GREAT WRITE-UP
subscribing for future referance... THANX :D |
![]() |
![]() |
![]() |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
NEWS: TOYOTA REVEALS ALL-NEW YARIS SEDAN AT 2006 LOS ANGELES AUTO SHOW | VitzBoy | General Yaris / Vitz Discussion | 7 | 09-20-2023 07:50 AM |
DIY Sedan Spoiler Install | Kaotic Lazagna | DIY / Maintenance / Service | 36 | 01-19-2020 11:35 PM |
Painting headlight housing black need diy.. | YarisSedan | Cosmetic Modifications (Exterior/Interior) | 5 | 12-12-2011 10:24 PM |
DIY Sedan Spoiler Install Interest? | Kaotic Lazagna | DIY / Maintenance / Service | 28 | 09-11-2007 11:02 PM |
Sedan Headlight removal | Go4th | DIY / Maintenance / Service | 1 | 02-04-2007 05:46 PM |