Power Enterprise Supercharger JUST RELEASED! - Page 9 - Toyota Yaris Forums

33OH · 01-28-2009, 04:55 PM

-

Power Enterprise Evan · 01-28-2009, 04:57 PM

Quote:

Originally Posted by ryank

People in Japan can also tune turbo's onto our car. We have yet to have a successfully tuned turbo on one of our USDM cars that I'm aware of.

Should I start selling turbos and just say that since people in Japan can do it we can too?

I appreciate your offer of an install, and this will be my last post on this thread, but until this product is tested on OUR car, this is a no-go for me. And that is the only reason why.

you can do whatever you want or claim, its your reputation

thank you for your interest,

KCALB SIRAY · 01-28-2009, 04:59 PM

Quote:

Originally Posted by Power Enterprise Evan

I still do not understand why you guys keep insisting that this product has never been tested.... it has been in the Japan and European markets for well over a year....ya you can give me all the grief you want that its not tested here in the US. Well, no one is getting any free kits ONE, TWO if you are in Irvine (largeorangefont) and want the kit I can help you with the install....

Please stop complaining....if the kit is out of your budget please move on...thank you for looking...

You must see what people want here. If you don't understand it, I can't understand why you would sell it. Warrenty aside, the USDM yaris differs from others in some ways and what they are looking for is for you to say and show that this kit will pose no problem and be a direct bolt on kit. I have yet to see you make that statement. If I'm wrong, I'll go over the entire post in a minute here and check just to make sure.

Power Enterprise Evan · 01-28-2009, 05:06 PM

Quote:

Originally Posted by KCALB SIRAY

You must see what people want here. If you don't understand it, I can't understand why you would sell it. Warrenty aside, the USDM yaris differs from others in some ways and what they are looking for is for you to say and show that this kit will pose no problem and be a direct bolt on kit. I have yet to see you make that statement. If I'm wrong, I'll go over the entire post in a minute here and check just to make sure.

before you start posting random things on here please read the ENTIRE thread throughly....

Quote:

Originally Posted by Power Enterprise Evan

the kit is complete install from A-Z

your tools, your time, and your knowledge is needed

KCALB SIRAY · 01-28-2009, 05:13 PM

Quote:

Originally Posted by Power Enterprise Evan

before you start posting random things on here please read the ENTIRE thread throughly....

Why the defensive remark? My post was for clarification on the subject, not a random post. Nothing but a negative attitude from the get go from you on peoples questions. I've seen you dance around questions over the past few days and not seen anything responsive to your claims. I just read over the thread and see no results on a USDM model Yaris and nothing to back it up but words. I can say for a fact you do not have my vote or my money if you continue to be defensive in the product you sell

mikenacarato · 01-28-2009, 05:31 PM

this kit will fit the usdm yaris. it says it will. 1nzfe is our engine code as well so there arent any differences, if there were, it wouldnt be a 1nzfe. how about someone do something productive with this thread and just get it. i could tell you right now if i had the money, i would have already ordered one. i plan to eventually in a few months so if no one grows a pair by then ill get it. quit asking repetative questions people and read from start to finish.

as far as the turbo stuff goes too, we can do what the jdm yarii do as well its all just a matter of finding the right places to get the right stuff. so if there are minor electrical wiring differences use your smarts and figure it out. not everything has to be plug and play for it to work.

Power Enterprise Evan · 01-28-2009, 05:31 PM

Really, KCALB SIRAY, it has come down to this, so many talkers here... no one is willing to step up to the plate, let me see someone show up with the cash, then feel free to ask all the legit questions they want... from what I see and read there are a lot of big shots, with no $$ to back it up....

according to

Quote:

Originally Posted by Chupacabra

So now you think that it's strictly a money thing? Not even close....I could buy 10 of these things right now. That's not the point....

WE WANT TO SEE REAL EXAMPLES THAT IT WORKS AND IS SUSTAINABLE FOR A DAILY DRIVER. Plus....once you factor in the economy...it's even more reason that you'd want to extend this offer because I don't car how much money somebody has....$4K is $4K and it's a lot of money for something that we really don't need but would like. Sounds like all you care about is your sales numbers. Raise the price on this and NOBODY will buy it.

he has enough for 10 units!! WOW impressive....i wish i was big ballin it too

I dont know how you do your shopping, but I buy my things from stores and large companies, why ??? because I know its an establishment and not a person that may or may not stand their products.... I am merely selling a product on here...the product I sell is backed by Rotrex and PE USA. Not to mention I am willing to stand by the product and take my OWN time and help someone with the install and questions....

So please if you have something constructive to add carry on, if not please do not post....

Power Enterprise Evan · 01-28-2009, 05:32 PM

Quote:

Originally Posted by mikenacarato

this kit will fit the usdm yaris. it says it will. 1nzfe is our engine code as well so there arent any differences, if there were, it wouldnt be a 1nzfe. how about someone do something productive with this thread and just get it. i could tell you right now if i had the money, i would have already ordered one. i plan to eventually in a few months so if no one grows a pair by then ill get it. quit asking repetative questions people and read from start to finish.

THANK YOU FOR A USEFUL COMMENT

mikenacarato · 01-28-2009, 05:38 PM

man if i had to money i would have already had one by now haha. i wish i could get a power enterprises credit card haha...financing anyone? ;)

Power Enterprise Evan · 01-28-2009, 05:41 PM

Quote:

Originally Posted by mikenacarato

man if i had to money i would have already had one by now haha. i wish i could get a power enterprises credit card haha...financing anyone? ;)

sorry wish i could, but the big boss in japan had bad experiences with it so no more...

mikenacarato · 01-28-2009, 05:45 PM

aaww shoot. :(

Kaotic Lazagna · 01-28-2009, 05:50 PM

The 1st gen Box and xA have 1NZ-FE motors too, but their turbo/sc kits don't directly bolt onto our cars.

Tamago · 01-28-2009, 05:51 PM

Quote:

Originally Posted by Kaotic Lazagna

The 1st gen Box and xA have 1NZ-FE motors too, but their turbo/sc kits don't directly bolt onto our cars.

but, it has the same engine!!!!!

it must fit!!!!!

that's why the xB Greddy kit bolts up perfectly to my xA

:sarcasm:

Kaotic Lazagna · 01-28-2009, 05:55 PM

A suggestion, why not take care of the tax for someone who would be interested to go to your shop and buy and install the kit? Compromise for everyone. No free kit, but the person will have a discount for being a "guinea pig", and will be able to provide detailed photos of the install. Just a suggestion.

Kaotic Lazagna · 01-28-2009, 05:56 PM

Quote:

Originally Posted by Tamago

but, it has the same engine!!!!!

it must fit!!!!!

that's why the xB Greddy kit bolts up perfectly to my xA

:sarcasm:

Love the sarcasm.

at3GG · 01-28-2009, 06:03 PM

So you refuse to answer questions for anyone but someone who thinks $4K is nothing. I dont care if this post gets deleted, your a d*ick and I hope nobody buys your product. All we want is proof that it works on OUR car. Not a JDM one. You refuse to be truthful about why you wont even TEST one here. "oh well it works overseas"....sorry not good enough. I will have no sympathy for anyone who buys this and encounters problems. Im not an a**hole either so hopefully i didnt piss any other members off, if i did, i apologize....to you and you alone. Especially Chino, i know you try to keep the peace but i feel it needed to be said. PM me if you have any concerns.

mikenacarato · 01-28-2009, 06:05 PM

ok your saying a turbo or s/c kit for ANOTHER car wont fit...well its not the same car. different cars run lines differently and wont have the same clearances. were talking about the same car with the same engine...it will fit.

Kaotic Lazagna · 01-28-2009, 06:11 PM

Quote:

Originally Posted by mikenacarato

ok your saying a turbo or s/c kit for ANOTHER car wont fit...well its not the same car. different cars run lines differently and wont have the same clearances. were talking about the same car with the same engine...it will fit.

Well, you did just say 1NZ-FE. Okay, a Yaris is a Yaris right? So how come JDM bumpers won't fit our USDM ones unless we get a JDM crash bar? "Same car" right?

01-28-2009, 04:55 PM	#145
33OH Drives: '08 Yaris Join Date: Oct 2008 Location: Dover, Ohio Posts: 7,606	- Last edited by 33OH; 01-28-2009 at 06:40 PM.

01-28-2009, 06:03 PM	#160
at3GG Drives: 07 metmet LB Join Date: Oct 2008 Location: VA Beach Posts: 648	So you refuse to answer questions for anyone but someone who thinks $4K is nothing. I dont care if this post gets deleted, your a dick and I hope nobody buys your product. All we want is proof that it works on OUR car. Not a JDM one. You refuse to be truthful about why you wont even TEST one here. "oh well it works overseas"....sorry not good enough. I will have no sympathy for anyone who buys this and encounters problems. Im not an a*hole either so hopefully i didnt piss any other members off, if i did, i apologize....to you and you alone. Especially Chino, i know you try to keep the peace but i feel it needed to be said. PM me if you have any concerns. __________________ F5 CAI, MR axleback, MR Header, NST SSK. Full Exhaust wrap, AT3 Custom SSK Konig Heliums 15x6.5 Black Tanabe Df210's

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
When will the Yaris hit the showrooms at dealers?	Petrolhead	New YARIS Purchase Forum	181	11-28-2011 07:03 AM
Questions and advice required about power upgrading(windows & locks)	W.A.S.P	DIY / Maintenance / Service	10	07-22-2009 02:59 AM
Pre-Hack Repost: DIY Eaton Supercharger, Why Not?	Nexus1155	Forced Induction Forum	67	01-10-2009 01:23 PM
Well seems the F&*king Power Package with Manual is impossible in the States(Hatch)	gaffo	General Yaris / Vitz Discussion	28	07-15-2007 07:55 PM
Need Help - Electrical (finding Power)	Ayka	DIY / Maintenance / Service	7	10-12-2006 11:51 AM

01-28-2009, 05:31 PM	#150
mikenacarato SIPNDEW View User's Garage Drives: 15 STI Join Date: Oct 2008 Location: Brentwood, TN Posts: 2,281	this kit will fit the usdm yaris. it says it will. 1nzfe is our engine code as well so there arent any differences, if there were, it wouldnt be a 1nzfe. how about someone do something productive with this thread and just get it. i could tell you right now if i had the money, i would have already ordered one. i plan to eventually in a few months so if no one grows a pair by then ill get it. quit asking repetative questions people and read from start to finish. as far as the turbo stuff goes too, we can do what the jdm yarii do as well its all just a matter of finding the right places to get the right stuff. so if there are minor electrical wiring differences use your smarts and figure it out. not everything has to be plug and play for it to work.

01-28-2009, 05:38 PM	#153
mikenacarato SIPNDEW View User's Garage Drives: 15 STI Join Date: Oct 2008 Location: Brentwood, TN Posts: 2,281	man if i had to money i would have already had one by now haha. i wish i could get a power enterprises credit card haha...financing anyone? ;)

01-28-2009, 05:45 PM	#155
mikenacarato SIPNDEW View User's Garage Drives: 15 STI Join Date: Oct 2008 Location: Brentwood, TN Posts: 2,281	aaww shoot. :(

01-28-2009, 05:50 PM	#156
Kaotic Lazagna View User's Garage Drives: '14 GT86, '08 Vitz Join Date: Dec 2006 Location: Central Valley, CA Posts: 9,873	The 1st gen Box and xA have 1NZ-FE motors too, but their turbo/sc kits don't directly bolt onto our cars.

01-28-2009, 05:55 PM	#158
Kaotic Lazagna View User's Garage Drives: '14 GT86, '08 Vitz Join Date: Dec 2006 Location: Central Valley, CA Posts: 9,873	A suggestion, why not take care of the tax for someone who would be interested to go to your shop and buy and install the kit? Compromise for everyone. No free kit, but the person will have a discount for being a "guinea pig", and will be able to provide detailed photos of the install. Just a suggestion.

01-28-2009, 06:05 PM	#161
mikenacarato SIPNDEW View User's Garage Drives: 15 STI Join Date: Oct 2008 Location: Brentwood, TN Posts: 2,281	ok your saying a turbo or s/c kit for ANOTHER car wont fit...well its not the same car. different cars run lines differently and wont have the same clearances. were talking about the same car with the same engine...it will fit.