|
09-05-2010, 02:50 PM | #1 |
Banned
Drives: "Burning It Down GTX2860RS XB" Join Date: Sep 2010
Location: Florida
Posts: 349
|
Scion XB 1NZ-FE Turbo build
I was asked to start a thread about my build. I was orginaly posting here because of the Gude head package, but I think we can all learn something new from each other since we carry the same motor.
My car which is just a toy and not a daily driver consumed me when I picked it up in 2005; brand new with 5 miles on it. At the time I had been working at Aerospace Components for 10 years doing nothing but manufacturing race car parts for drag racing. It became a running joke that I couldn't get this motor to make over 250hp.Keep in mind all the guys that work there are BBC guys running door cars. so like all males I set out to prove them wrong. Here is a quick overview of my mods. I will post pics and continue with explaining my mods as questions arrise. Fully Built Race motor: 1NZ-FE 9:1 Compression Golden Eagle Sleved block Crower rods Arias Pistons Ferara Valves + 1 mm oversized Ferara retainers, Lockers, springs 3 way valve job Ported and polished head Gude cams Weapon-R sheet metal intake Edlebrock Victor-X 70mm TB Tial / Garrett GTX-2860 RS Turbo w/ SS Housing and Billet Wheel Greddy Intercooler Tial Q BOV Tial MVS Wate gate LHT Performance custom Exhaust manifold/ down pipe and all intercooling pipe Cometic gaskets HKS air filter Apexi Super grounding system Apexi GT Resivor tank Stand Alone ECU: Microtech LT10 w/ Microtech Ignition and Bosch coil packs Electromotive crank trigger Nology Hot wires / NGK plugs Greddy Turbo timer Greddy Boost controller Fuel System: Walboro 255l , Aeromotive regulator , Perrin fuel rail , Aerospace Components custom fuel block for NX kit 680cc Precision injectors AEM methanol injection DEI complete Cryo system Nitrous Express 100 shot kit tps activated. auto bottle opener w/ fire and ice cooling system for constant 1000 psi Tuned By: Rolo at CFT Aerospace Components 13" full floater disc brake system front and rear N.B.S 2.5" custom stainless exhaust w/ Aeroturbine Resonator and Skunk2 Can Oil system: Perma cool Perrin under drive pully Level 10 5 speed transmission Ferdenza clutch and fly wheel Autometer gauges 12 point roll cage JIC Majic dampner kit Axels: Drive shaft shop Sparco seats, pedals and shift knob TRD short shifter Samco hoses 5 Zigen 18" Pro Racer Nitto rubber NT555 Seibon carbon fiber hood and hatch Greddy boost controller and timmer |
09-05-2010, 02:55 PM | #2 |
Banned
Drives: "Burning It Down GTX2860RS XB" Join Date: Sep 2010
Location: Florida
Posts: 349
|
Also some of my parts listed are not in the current motor pic due to me customizing them. Like most racing parts their never how you want them out of the box.
|
09-05-2010, 02:57 PM | #3 |
Drives: 09 YarHB Join Date: Feb 2009
Location: Canada
Posts: 175
|
Nice! what kind of numbers are you getting out of it??
WOW!!! How many numbers did you put into it? HAHA $$$$$ |
09-05-2010, 03:20 PM | #4 |
Banned
Drives: "Burning It Down GTX2860RS XB" Join Date: Sep 2010
Location: Florida
Posts: 349
|
Prior to this build I had a Greddy turbo kit 14G and maxed out at 228hp. What I am showing you now is all new and I have not tuned it yet. I'm waiting on a head from Gude to finalize the motor build. As far as how much coin is in this build, I've lost track but my wife hasn't. I think total which includes the car and everthing I've done inside and out around 65k. Nothing on this car has gone untouched. I think the VIN# is still the same though. Here is a pic of the brake system with my old AXIS wheels on. Front and rear 13" full floater race kits.
|
09-05-2010, 03:30 PM | #5 |
Banned
Drives: "Burning It Down GTX2860RS XB" Join Date: Sep 2010
Location: Florida
Posts: 349
|
Ok back to the build, Here is my one-off exhaust manifold. what a Pain in the ass to get that turbo to fit.
|
09-05-2010, 06:43 PM | #6 |
Drives: Vitz RS Turbo Join Date: Nov 2008
Location: ML
Posts: 576
|
Man this is an awesome setup man... I am curious how much is your 1/4mile time!
Is the transmission the stock 5speed? |
09-05-2010, 06:43 PM | #7 |
Drives: 2008 Yaris LB Join Date: Jul 2010
Location: PA
Posts: 899
|
Wow!
I guess working where you do you make the kind of money to be able and fortunate to do this to a yaris, or any car for that matter. Much respect and i wish i could win the lotto someday lol. |
09-05-2010, 06:51 PM | #8 |
Your mom goes to college
Drives: 08 Vitz Join Date: Oct 2008
Location: Just chillin' out brah !
Posts: 1,434
|
WOw wow wow ! Amazing build so-far keep up posted on those numbers with you new set-up
__________________
Garm is permanently high because he is the king of smokin' deals! |
09-05-2010, 07:55 PM | #9 |
Banned
Drives: 07 sedan Join Date: Mar 2010
Location: new mexico
Posts: 292
|
|
09-05-2010, 11:39 PM | #10 |
C'est la vie
Drives: 2009 2 door hatchback Join Date: Aug 2009
Location: chicago
Posts: 482
|
Thats pulling out all the stops. Sweet ride.
|
09-05-2010, 11:53 PM | #11 |
oh my
|
|
09-06-2010, 04:49 AM | #12 |
Drives: yaris1.33 Join Date: Jul 2010
Location: slovakia
Posts: 425
|
congratulations
nice ride |
09-06-2010, 06:50 AM | #13 |
Banned
Drives: "Burning It Down GTX2860RS XB" Join Date: Sep 2010
Location: Florida
Posts: 349
|
Thanks for all the props. just keep my fingers crossed everything goes like it should. Here's some more pics.
|
09-10-2010, 11:46 AM | #14 |
Banned
Drives: "Burning It Down GTX2860RS XB" Join Date: Sep 2010
Location: Florida
Posts: 349
|
Here is a close up of the 70mm T/B on the Weapon-R intake manifold
|
09-10-2010, 12:54 PM | #15 |
ULTIMATE
Drives: 07 Yaris Turbo Join Date: May 2007
Location: Canoga Park, CA
Posts: 14,859
|
did Drive Shaft Shop do your axles?
__________________
Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific. |
09-10-2010, 02:24 PM | #16 |
Banned
Drives: "Burning It Down GTX2860RS XB" Join Date: Sep 2010
Location: Florida
Posts: 349
|
Yes, DSS did my axels. I've abused my stock axels so much that I went ahead and bit the bullet for a set of those axels. Their 26 spline like on a stock Mustang. So now no more worries.
I've done a ton of suspension work on this new build. Besides the axels I'm using JIC Double adjustable dampners, Hotchkis front and rear sway bars, JIC under body braces and of course that 13" full disc front and rear brake kit. I'm pulling the plastic tunnel out between the seats and refitting the car with a aluminum tunnel and installing a Hydraulic hand brake from K-Sport. No more stock parking brake. Besides could prove to be a little fun. XBG |
09-10-2010, 03:18 PM | #17 |
What I thought I'd do was
Drives: 09 Yaris Sedan Join Date: Aug 2009
Location: Northwest Alabama
Posts: 1,140
|
O_O
Holy crap...
__________________
My Nissan Hardbody (D21) 4x4 build log Check out my YouTube channel (mostly shooting) - http://www.youtube.com/user/47MasoN47 |
09-10-2010, 04:53 PM | #18 |
ULTIMATE
Drives: 07 Yaris Turbo Join Date: May 2007
Location: Canoga Park, CA
Posts: 14,859
|
What is the intended purpose of the vehicle?
__________________
Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific. |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Want to build costom turbo kit. Need advice from boosted guys! | pimp my yaris | Forced Induction Forum | 639 | 09-28-2013 11:26 AM |
FS: 2005 Scion xA RS2.0 Turbo | uberegg | Cars for Sale by private party | 40 | 04-03-2010 11:45 AM |
Scion xd turbo | PARIS | Yaris TS Talk | 22 | 02-26-2010 08:08 AM |
Chevy Aveo RS: Turbo + good looks = build it! | Thirty-Nine | Off-topic / Other Cars / Everything else Discussions | 22 | 01-12-2010 12:36 PM |
Check out the new Scion iQ concept. In the States in 2011/2012 | LA Yaris | California | 9 | 10-23-2009 08:11 PM |