Rear brake disks sliding bolt torque - Toyota Yaris Forums

Keymaster · 02-28-2016, 04:41 PM

Hello guys, I am searching for the correct torque that I need to apply when I will remove the sliding bolts from the rear brakes in my Yaris. The model is 2006 and the back axle has brake disks. It is rather challenging to find info for the removal of rear brake disks, because all the manuals that I've found so far, they have only drum brakes related info.
Thanks a lot!

Frank the Tank · 02-28-2016, 05:36 PM

Your car came from the factory with rear disk brakes? That's pretty cool.

I would call the dealership and ask one of the technicians.

invader166 · 02-28-2016, 07:06 PM

I've noticed that the torque specs for front caliper bracket and pins for the Yaris are the same as the Corolla torque specs.

I would say go with the same specs as the Corolla rear disk breaks and you probably won't go wrong.

CTScott · 02-28-2016, 07:50 PM

Quote:

Originally Posted by Keymaster

Hello guys, I am searching for the correct torque that I need to apply when I will remove the sliding bolts from the rear brakes in my Yaris. The model is 2006 and the back axle has brake disks. It is rather challenging to find info for the removal of rear brake disks, because all the manuals that I've found so far, they have only drum brakes related info.
Thanks a lot!

For the European Yaris with rear disc brakes, I am seeing:
39 N-m (400 kgf-cm, 29 ft-lbf) for the slide pin torque.

Keymaster · 03-01-2016, 03:09 AM

Yes, it was from the factory

Thank you very much CTScott you saved my day, I have been searching for this info a couple of days in manuals and I was about to go for corolla specs.

Keymaster · 04-08-2016, 01:23 AM

I return back with one more question regarding torque. The place is rear brakes with disks and the bolts is the one in the photo. Any input is very welcome :-)

Keymaster · 04-12-2016, 03:53 AM

I finally found the info that I was looking for. Here are the torque for the rear disk brake in a 2SZ-FE:

02-28-2016, 04:41 PM	#1
Keymaster Drives: Yaris '06 1300cc Join Date: Dec 2006 Location: Sweden Posts: 22	Rear brake disks sliding bolt torque Hello guys, I am searching for the correct torque that I need to apply when I will remove the sliding bolts from the rear brakes in my Yaris. The model is 2006 and the back axle has brake disks. It is rather challenging to find info for the removal of rear brake disks, because all the manuals that I've found so far, they have only drum brakes related info. Thanks a lot!

02-28-2016, 07:06 PM	#3
invader166 Pumpman Drives: 2019 Kia Soul EV Base Join Date: Dec 2014 Location: Langley, BC Posts: 434	I've noticed that the torque specs for front caliper bracket and pins for the Yaris are the same as the Corolla torque specs. I would say go with the same specs as the Corolla rear disk breaks and you probably won't go wrong. __________________ "I would rather loose by a mile in a car I built myself, then win by an inch in a car that was built for me." - Moog

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Zage Turbo Kit Install - Toyota Yaris	Focus_Sh1ft	Forced Induction Forum	160	02-06-2022 08:14 PM
When will the Yaris hit the showrooms at dealers?	Petrolhead	New YARIS Purchase Forum	181	11-28-2011 07:03 AM
Catback exhausts and rear disc brake conversions	eTiMaGo	Performance Modifications	59	01-04-2009 06:13 PM
Yaris/Echo Rear Brake Question	pdarnell	DIY / Maintenance / Service	2	08-21-2007 01:15 PM
Rear brake proportioning valve???	PetersRedYaris	DIY / Maintenance / Service	16	03-25-2007 11:10 PM

02-28-2016, 05:36 PM	#2
Frank the Tank Drives: 2007 Toyota Yaris Join Date: Nov 2015 Location: Toronto Posts: 78	Your car came from the factory with rear disk brakes? That's pretty cool. I would call the dealership and ask one of the technicians.

03-01-2016, 03:09 AM	#5
Keymaster Drives: Yaris '06 1300cc Join Date: Dec 2006 Location: Sweden Posts: 22	Yes, it was from the factory Thank you very much CTScott you saved my day, I have been searching for this info a couple of days in manuals and I was about to go for corolla specs.