Gage Cluster Trim Plastic - Toyota Yaris Forums

metalshark · 04-04-2009, 06:35 PM

If you have a Yaris you are parting out I'd like to buy the plastic trim that snaps in over the gage cluster.
Thanks. If I had a few of these in stock I could start shipping my custom tachometer for the Yaris on an exchange/credit basis. You get the new snap-in display, I get your old plastic.

1NZYaris1 · 04-04-2009, 09:54 PM

can we see the install, your talking about.

cali yaris · 04-04-2009, 10:35 PM

NOT -- let's see what you're up to!

1NZYaris1 · 04-04-2009, 10:57 PM

Hmmmm,

lights are on , but no ones home .

we want

,

*tk-421* · 04-05-2009, 12:51 AM

Quote:

Originally Posted by 1NZYaris1

can we see the install, your talking about.

Quote:

Originally Posted by cali yaris

NOT -- let's see what you're up to!

1NZYaris1 · 04-05-2009, 02:22 AM

Now that looks pretty cool, is there a thread where we can
read all about it , i

flashing lights

LtNoogie · 04-05-2009, 02:31 AM

http://www.yarisworld.com/forums/showthread.php?t=11553

1NZYaris1 · 04-05-2009, 04:03 AM

This sounds and looks way cool , i like the knight rider affect as well

metalshark · 04-05-2009, 06:45 AM

I've built three of my custom tachs. I've got a DIY thread under source code for tachometer. The processor cost is to high to allow a group buy on kits so I'm porting over to a MicroChip platformed design, maybe a PIC24/DS PIC. The starter kit comes with a student C compiler and will set me back $300. I need to teach myself how to do a clip on Utube and link it. Someone here did a post last week showing me how to mount a camera with two shower poles so I could show the dash down the track.
After the upgrade I'm considering a digital read out at the top center with the analog LED string up the left side (right side in the UK). If I ever get it all done it would be a three wire install.

04-04-2009, 06:35 PM	#1
metalshark MetalShark Drives: 2008 Yaris LB Join Date: Oct 2008 Location: Mesa, AZ Posts: 104	Gage Cluster Trim Plastic If you have a Yaris you are parting out I'd like to buy the plastic trim that snaps in over the gage cluster. Thanks. If I had a few of these in stock I could start shipping my custom tachometer for the Yaris on an exchange/credit basis. You get the new snap-in display, I get your old plastic. __________________ Absolutely red, Drawtite hitch, CAI, Insulated Header, Amsoil 5w-30, Mag-drain plug, Red-Line MT-90 tranny oil, Scotch-Guard, Window Tint, Dash rug, Custom short throw shifter, Lowered OEM arm rest, Super-Turbo muffler/w chrome slash cut tip., TRD rear sway bar, sticky pads, front shock tower bar, RS grill badge, VVT-i emblems, Second tire set from Tirerack.com, DISABLED DAY TIME RUNNING LIGHTS, platform- style locking custom bike rack. 86K miles so far. 5 years use now on ceramic wrapped insulated stainless-steel header.

04-04-2009, 09:54 PM	#2
1NZYaris1 View User's Garage Drives: Yaris Join Date: Oct 2008 Location: New Zealand Posts: 2,566	can we see the install, your talking about. __________________ http://www.microimageonline.com/forums/index.php

04-04-2009, 10:35 PM	#3
cali yaris ULTIMATE View User's Garage Drives: 07 Yaris Turbo Join Date: May 2007 Location: Canoga Park, CA Posts: 14,859	NOT -- let's see what you're up to! __________________ Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific.

04-04-2009, 10:57 PM	#4
1NZYaris1 View User's Garage Drives: Yaris Join Date: Oct 2008 Location: New Zealand Posts: 2,566	Hmmmm, lights are on , but no ones home . we want , __________________ http://www.microimageonline.com/forums/index.php

04-05-2009, 02:22 AM	#6
1NZYaris1 View User's Garage Drives: Yaris Join Date: Oct 2008 Location: New Zealand Posts: 2,566	Now that looks pretty cool, is there a thread where we can read all about it , i flashing lights __________________ http://www.microimageonline.com/forums/index.php

04-05-2009, 02:31 AM	#7
LtNoogie View User's Garage Drives: '08 Bayou Blue LB AT Join Date: Oct 2008 Location: West Hills, CA Posts: 2,517	http://www.yarisworld.com/forums/showthread.php?t=11553 __________________ aFe Intake \| Blitz Supercharger \| Megan Header \| TRD Exhaust \| NST Pulley Set TRD Shocks/Struts \| Tanabe NF210 Springs \| TRD Sway Bar \| Motegi TRAKLITE wheels \| Kuhmo Ecsta XS R1 Concepts slotted rotors \| Carbotech 1521 brake pads \| stainless steel brake lines \| Seibon vented carbon fiber hood

04-05-2009, 04:03 AM	#8
1NZYaris1 View User's Garage Drives: Yaris Join Date: Oct 2008 Location: New Zealand Posts: 2,566	This sounds and looks way cool , i like the knight rider affect as well __________________ http://www.microimageonline.com/forums/index.php

04-05-2009, 06:45 AM	#9
metalshark MetalShark Drives: 2008 Yaris LB Join Date: Oct 2008 Location: Mesa, AZ Posts: 104	Post Script I've built three of my custom tachs. I've got a DIY thread under source code for tachometer. The processor cost is to high to allow a group buy on kits so I'm porting over to a MicroChip platformed design, maybe a PIC24/DS PIC. The starter kit comes with a student C compiler and will set me back $300. I need to teach myself how to do a clip on Utube and link it. Someone here did a post last week showing me how to mount a camera with two shower poles so I could show the dash down the track. After the upgrade I'm considering a digital read out at the top center with the analog LED string up the left side (right side in the UK). If I ever get it all done it would be a three wire install. __________________ Absolutely red, Drawtite hitch, CAI, Insulated Header, Amsoil 5w-30, Mag-drain plug, Red-Line MT-90 tranny oil, Scotch-Guard, Window Tint, Dash rug, Custom short throw shifter, Lowered OEM arm rest, Super-Turbo muffler/w chrome slash cut tip., TRD rear sway bar, sticky pads, front shock tower bar, RS grill badge, VVT-i emblems, Second tire set from Tirerack.com, DISABLED DAY TIME RUNNING LIGHTS, platform- style locking custom bike rack. 86K miles so far. 5 years use now on ceramic wrapped insulated stainless-steel header. Last edited by metalshark; 04-05-2009 at 06:53 AM. Reason: Added material

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY (08' USDM LB): Interior Light Color Change	revnull	DIY / Maintenance / Service	37	05-21-2016 12:59 PM
Group Buy - True Double Din Radio Trim for Liftbacks (180mm opening)	CTScott	Items for Sale by private party	259	06-08-2011 11:13 PM
Canadian DD trim piece. Can any of you Canadian members get one?	IsLNdbOi	In Car Entertainment + Electronics (audio / video / alarm)	23	12-20-2008 12:52 AM
Sedan Instrument Cluster to LB Instrument Cluster	Malaya1221	Cosmetic Modifications (Exterior/Interior)	2	12-02-2008 10:05 PM
stock detachable faceplate	johnnyfive	In Car Entertainment + Electronics (audio / video / alarm)	1	07-13-2006 11:31 AM