Suspension part interchangeability for 2015 5 door hatch back

[Calrenman]

Hello
Does anyone have any idea about part interchange ability between yaris generations?
I have a 2015 and nobody has aftermarket frame braces or strut/ shock tower braces. The pics look the same except for the mounts on the shocks.
I would love to start a sticky on parts interchangeability.

First example is the sway bar from the 2013. The PTR11-52071 is supposed to bolt right up. I am installing one on my 2015 Le 5 door hatch.

What else can I get away with?

[mitch9521]

Pretty much anything suspension-wise from a 2nd gen(06-11) will bolt into a 3rd gen hatchback(12-19).

[Calrenman]

Thanks Mitch.

Originally Posted by mitch9521

Pretty much anything suspension-wise from a 2nd gen(06-11) will bolt into a 3rd gen hatchback(12-19).

I thought the shock mounts and front strut tower are different (I want to install a strut tower brace.).

[mitch9521]

Originally Posted by Calrenman

Thanks Mitch.



I thought the shock mounts and front strut tower are different (I want to install a strut tower brace.).

I have a Tanabe strut bar ready to go onto my car next weekend when I swap onto my summer wheels and the part number is the same between the NCP91(2nd gen hatch) and NCP131(3rd gen).

[Calrenman]

Let me know how it works. I have not purchased the strut bat yet.
I am looking at the "Front Strut Bar for 2006-2020 Toyota Yaris XP90 XP150 1.5 Hatchback Ultra Racing" (link below). Have you had any experience or heard any reviews with this company's gear? The braces look stout!

I put a "horn brace" and a urethane suspension on my hatch back 3cyl./5 speed 1998 GEO Metro. It was fun in the canyons here in L.A./ Ventura. 0 to 60 in under an hour!

https://www.ebay.com/itm/11519063749...4AAOSwL2hh4PVT

Originally Posted by mitch9521

I have a Tanabe strut bar ready to go onto my car next weekend when I swap onto my summer wheels and the part number is the same between the NCP91(2nd gen hatch) and NCP131(3rd gen).

[mitch9521]

Originally Posted by Calrenman

Let me know how it works. I have not purchased the strut bat yet.
I am looking at the "Front Strut Bar for 2006-2020 Toyota Yaris XP90 XP150 1.5 Hatchback Ultra Racing" (link below). Have you had any experience or heard any reviews with this company's gear? The braces look stout!

I put a "horn brace" and a urethane suspension on my hatch back 3cyl./5 speed 1998 GEO Metro. It was fun in the canyons here in L.A./ Ventura. 0 to 60 in under an hour!

https://www.ebay.com/itm/11519063749...4AAOSwL2hh4PVT

I have an Ultra Racing strut bar for a 91-99 Tercel/Paseo in my shed that is unopened but other than that I have no experience with them.

They seem to be fairly decent for one that is non-adjustable. I recommend the Tanabe one, you can adjust it.

[Calrenman]

I found what Mitch posted here has been true 2nd gen works on 3rd gen.

Originally Posted by mitch9521

Pretty much anything suspension-wise from a 2nd gen(06-11) will bolt into a 3rd gen hatchback(12-19).

[Calrenman]

What does the adjustment do? Camber? Or just stiffen the ride?

Is the tanabe four bolts or two?

Do you have a part # or link handy?

I am new to the mods on this car. My car has been in a fender bender so adjustment may be a good call. Car tracks well. I cannot wait to put the sway bar on. The freeway is wobbly in the wind.

Thanks for the heads up.

[mitch9521]

Originally Posted by Calrenman

What does the adjustment do? Camber? Or just stiffen the ride?

Is the tanabe four bolts or two?

Do you have a part # or link handy?

I am new to the mods on this car. My car has been in a fender bender so adjustment may be a good call. Car tracks well. I cannot wait to put the sway bar on. The freeway is wobbly in the wind.

Thanks for the heads up.

Tanabe part number should be: NST45.
I got mine from RHDJapan.


This link should help you:

https://www.yarisworld.com/forums/showthread.php?t=2285

[Calrenman]

Hello Mitch. Did you install the bar yet?
Is there a difference?

Originally Posted by mitch9521

Tanabe part number should be: NST45.
I got mine from RHDJapan.


This link should help you:

https://www.yarisworld.com/forums/showthread.php?t=2285

[mitch9521]

Originally Posted by Calrenman

Hello Mitch. Did you install the bar yet?
Is there a difference?

No I ran out of time and didn't get around to installing the strut bar. Its on the list lol.

Planning a wedding eats up alot of time.

On the other hand, my exhaust came in from Japan so I get to install that too at some point

[Calrenman]

did you get a "cat back" exhaust? Good luck with the wedding.

Originally Posted by mitch9521

No I ran out of time and didn't get around to installing the strut bar. Its on the list lol.

Planning a wedding eats up alot of time.

On the other hand, my exhaust came in from Japan so I get to install that too at some point

[Calrenman]

Thank you Mitch.

[Calrenman]

I installed the sway bar and some rubber spring spacers that firmed the ride up and it tracks completely "true" now.
The slop in the rear axle/ trailing arm is gone! TRD sway bar is the way to go!
I also installed a trailer hitch for a bike rack that seemed to stiffen it up too.



I may have made contact with a Japanese Manufacturer of frame and body braces for test fitting some braces on the 2015 Yaris 3rd gen with an automatic. It may help get parts lists "UPDATED" and expanded. I will go to their shop at the end of the month. I will figure how to get pictures and video up to share results.

[Ryan23]

Just put trd springs and sway bar on my 18 box says only good to 11

[Calrenman]

Originally Posted by Ryan23

Just put trd springs and sway bar on my 18 box says only good to 11

I am going to get some rear Cusco Frame Braces for the rear axle mounts in a few days. They were only listed for yaris 2011-14. The engineer checked the measurements and they are good for my 2015.

[Calrenman]

I just found a company in the states that sells urethane bushings for our cars!.

Company home:
https://superprousa.com/

Page for our cars:
https://superprousa.com/collections/...ase-esi2233258

[Calrenman]

The following youtuber has some great how to assembly vids.

https://www.youtube.com/watch?v=z8bqq5rh3x0