Toyota Yaris Forums - Ultimate Yaris Enthusiast Site
 

 


 
Go Back   Toyota Yaris Forums - Ultimate Yaris Enthusiast Site > Technical Forums > Performance Modifications
  The Tire Rack

Reply
 
Thread Tools Display Modes
Old 03-13-2021, 02:40 PM   #19
remcafee
 
Drives: 2007 Toyota Yaris 3 door
Join Date: Sep 2018
Location: Arizona
Posts: 399
sometimes you gotta give them a good smacking with a hammer, but as long as the 4 bolts are loose it should come out
remcafee is offline   Reply With Quote
Old 03-16-2021, 12:36 PM   #20
Neinris
 
Drives: 08 Yaris 3 Door Hatchback
Join Date: Aug 2019
Location: ‘Murica!
Posts: 446
Looks like the LKQ near me near me just added a 2015 Corolla in their inventory. I'll check if it has rear disc brakes while I'm there trying to grab other things. Stay tuned!
Neinris is offline   Reply With Quote
Old 03-16-2021, 08:23 PM   #21
Neinris
 
Drives: 08 Yaris 3 Door Hatchback
Join Date: Aug 2019
Location: ‘Murica!
Posts: 446
Ok... So the 2015 Corolla has rear disc brakes, I took them off and hid them for now... I bought just the right splash guard for now. I guess we’ll test fit this weekend, and if it works, then I’m off to grab the rest of them, I was even careful to remove the e-brake cables, I hope those will work as well. Crossing my fingers!!!
Attached Images
File Type: jpeg A71F7928-0CF7-49E5-A0A9-8734D6E8A2B9.jpeg (343.2 KB, 78 views)
File Type: jpeg E481893A-CFA2-45CC-AEBF-756D1707B639.jpeg (321.5 KB, 79 views)
Neinris is offline   Reply With Quote
Old 03-16-2021, 09:06 PM   #22
06YarisRS
 
Drives: 06 2ZR Turbo Yaris RS
Join Date: Aug 2017
Location: Fredericton, New Brunswick, Canada
Posts: 2,384
Great work! Can't wait for the outcome.
__________________


2006 Yaris 5 Door RS 2ZR-FE (2011 Corolla 1.8L) Swapped, Automatic, T-28 Turbocharged (8 psi), HSD MonoPro Coilovers, DIY W/M Injection, custom 3" cold air intake, custom 2.5" exhaust, TRD rear sway bar, Penguin Garage 13mm spacers (rear), custom Civic front lip, full repaint, Android 6.0 7" touchscreen, Rockford Fosgate speakers, tweeters, NVX underseat subwoofer
https://www.instagram.com/2zr_turbo_yarisrs/
06YarisRS is offline   Reply With Quote
Old 03-17-2021, 12:04 AM   #23
enviri
 
enviri's Avatar
 
Drives: 2010 Yaris
Join Date: Oct 2008
Location: CT
Posts: 1,516
that bolt pattern looks almost square....im already worried. lining it up via photoshop (i have a spare rear hub) made my assumption worse.

Last edited by enviri; 03-17-2021 at 12:17 AM.
enviri is offline   Reply With Quote
Old 03-17-2021, 01:13 AM   #24
Neinris
 
Drives: 08 Yaris 3 Door Hatchback
Join Date: Aug 2019
Location: ‘Murica!
Posts: 446
How about this?

I took more pics and made it as parallel the the plate as I can, as you all know, the image can get distorted if not taken perfectly squared. I also made some measurements, I’m probably off by +|- 3mm, but I eyeballed the center of the holes the best I can. Can you take measurements?
Neinris is offline   Reply With Quote
Old 03-17-2021, 01:26 AM   #25
enviri
 
enviri's Avatar
 
Drives: 2010 Yaris
Join Date: Oct 2008
Location: CT
Posts: 1,516
ooo a digital caliper. so fancy.
enviri is offline   Reply With Quote
Old 03-17-2021, 01:32 AM   #26
enviri
 
enviri's Avatar
 
Drives: 2010 Yaris
Join Date: Oct 2008
Location: CT
Posts: 1,516
pics may be too big?
Attached Images
File Type: jpg DSC_0021.jpg (67.3 KB, 75 views)
File Type: jpg DSC_0022.jpg (77.7 KB, 76 views)
File Type: jpg DSC_0023.jpg (78.7 KB, 75 views)
enviri is offline   Reply With Quote
Old 03-17-2021, 01:32 AM   #27
Neinris
 
Drives: 08 Yaris 3 Door Hatchback
Join Date: Aug 2019
Location: ‘Murica!
Posts: 446
Quote:
Originally Posted by enviri View Post
ooo a digital caliper. so fancy.


It's actually garbage, got it from Auto Zone, didn't know it's made of plastic. Sigh...
Neinris is offline   Reply With Quote
Old 03-17-2021, 01:35 AM   #28
enviri
 
enviri's Avatar
 
Drives: 2010 Yaris
Join Date: Oct 2008
Location: CT
Posts: 1,516
i might have a caliper in my trunk, but then i have to carry my 1nz head OFF the trunk...meh.
enviri is offline   Reply With Quote
Old 03-17-2021, 01:40 AM   #29
Neinris
 
Drives: 08 Yaris 3 Door Hatchback
Join Date: Aug 2019
Location: ‘Murica!
Posts: 446
Quote:
Originally Posted by enviri View Post
pics may be too big?
Hmmm... it's not looking good.
But I won't let that discourage me, I'll still do a fitment test. Crossing my fingers.
Neinris is offline   Reply With Quote
Old 03-17-2021, 06:59 PM   #30
remcafee
 
Drives: 2007 Toyota Yaris 3 door
Join Date: Sep 2018
Location: Arizona
Posts: 399
hmmm its a completely different design than our yaris, the caliper mounting holes are part of the dust shield, interesting, it looks awfully thicker than the yariss hub from the side pics im thinking it may need to shim the hubs (assuming they fit) so that the rear disc brakes wont be dragging sice they arent at the right angle
remcafee is offline   Reply With Quote
Old 03-18-2021, 01:22 AM   #31
Neinris
 
Drives: 08 Yaris 3 Door Hatchback
Join Date: Aug 2019
Location: ‘Murica!
Posts: 446
Quote:
Originally Posted by remcafee View Post
hmmm its a completely different design than our yaris, the caliper mounting holes are part of the dust shield, interesting, it looks awfully thicker than the yariss hub from the side pics im thinking it may need to shim the hubs (assuming they fit) so that the rear disc brakes wont be dragging sice they arent at the right angle
Sorry, I didn't get what you mean by it not being the right angle? Maybe you're talking about using the calipers from the Yaris SE? For this build you'd have use the calipers that came with the car, which is what I was planning all along.

Anyway, the difference how the Corolla and the Yaris bolts their rear hubs are that the Corolla's bolts comes from the back, the threads are on the hubs, while the Yaris bolts comes from the front, the threads are on the axle frame. I've tested the bolts that came with the splash guard, they thread in the mounting holes, and they're longer too. They have washer on them, which I'd probably remove to make sure they'd thread through all the way.

I just measured how thick the mounting face is, it's 11mm with the splash guard. Which means the wheels will stick out that much further. I'm fine with that, since the rear are tucked in more than the front anyway. If this works, the wheels will 6mm further than the front, 12mm total. According to this video, the front is 1470mm wide and the rear 1460mm, around 2:48 in the time stamp:

https://www.youtube.com/watch?v=GuEcY4RwS50&t=170s

I tried to remove the rear passenger hub after work today, but I got bested by it. I forgot to take measurements, I was in a hurry as I was running out of daylight. I'll buy two long bolts of the same thread size, nuts, and washers from Home Depot tomorrow, I should be able to safely back it out using the same method done in this video:

https://www.youtube.com/watch?v=7nj_KUkASxg

All in all, I just wish the center hole is the same size. If the mounting holes don't lineup, I'd probably get them filled with weld and drill the correct holes in them. Hopefully I don't have to resort to that.
Neinris is offline   Reply With Quote
Old 03-18-2021, 03:54 PM   #32
enviri
 
enviri's Avatar
 
Drives: 2010 Yaris
Join Date: Oct 2008
Location: CT
Posts: 1,516
there might be some shaving to be done to the dust shield around the top to fit the yaris axle mount indeed.. have fun!
enviri is offline   Reply With Quote
Old 03-18-2021, 05:32 PM   #33
Neinris
 
Drives: 08 Yaris 3 Door Hatchback
Join Date: Aug 2019
Location: ‘Murica!
Posts: 446
Postponed...

Well, I’m a little disappointed that the mounting holes didn’t lineup, not a single one, but the center hole is the same size so there’s still hope. I’m going to continue this project, but I’ll postpone it for now.
Attached Images
File Type: jpeg 5B6F79B8-886C-4782-8530-32357E7D0A65.jpeg (389.4 KB, 66 views)
Neinris is offline   Reply With Quote
Old 03-18-2021, 07:34 PM   #34
enviri
 
enviri's Avatar
 
Drives: 2010 Yaris
Join Date: Oct 2008
Location: CT
Posts: 1,516
fill and redrill, find a machinist, mass produce. or make a hub spacer and screw the dust shield
enviri is offline   Reply With Quote
Old 03-18-2021, 10:00 PM   #35
Neinris
 
Drives: 08 Yaris 3 Door Hatchback
Join Date: Aug 2019
Location: ‘Murica!
Posts: 446
Quote:
Originally Posted by enviri View Post
fill and redrill, find a machinist, mass produce. or make a hub spacer and screw the dust shield
That's partially what I have planned. I'm going to fill the holes and redrill. If the center of the hub don't poke through the back, I'm going to mill down the back of the plate just a bit so that the center of the hub would poke through even just a bit, 3mm should be enough, so the weight is not on the bolts. I might wait to do all of that until I'm back in Maryland though, my friend has a mill, drill press, etc. That's why I'm putting this on pause. I am going to go ahead and get the rest of the hardware from the junkyard this weekend though, I don't know when I'd get the opportunity again to find the whole set. I'll even grab the ebrake cables to make everything easier on me when it's finally time to install. I'll revive this thread once I've actually installed.
I don't know about mass producing, I might just give out the template dimensions for everyone to get their own made.
Neinris is offline   Reply With Quote
Old 03-18-2021, 11:54 PM   #36
enviri
 
enviri's Avatar
 
Drives: 2010 Yaris
Join Date: Oct 2008
Location: CT
Posts: 1,516
ever seen the old penguin garage hub spacers? you can just do that and add ears.
enviri is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
NEWS: TOYOTA REVEALS ALL-NEW YARIS SEDAN AT 2006 LOS ANGELES AUTO SHOW VitzBoy General Yaris / Vitz Discussion 7 09-20-2023 07:50 AM
Runstop Rear Disc Salvageable? ilikerice Wheels, Tires and Suspension Forum sponsored by The Tire Rack 3 05-26-2016 04:38 PM
Rear Drum to Disc Brake Conversion Mark-UPI Wheels, Tires and Suspension Forum sponsored by The Tire Rack 40 03-12-2015 11:26 PM
When will the Yaris hit the showrooms at dealers? Petrolhead New YARIS Purchase Forum 181 11-28-2011 07:03 AM
Questions About rear disc brake system???? jyfro_13 DIY / Maintenance / Service 4 12-22-2009 09:25 PM


All times are GMT -4. The time now is 08:37 AM.




YarisWorld
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.