Blitz missing hardware (what length) - Toyota Yaris Forums

wildmongoose26 · 03-22-2013, 03:01 AM

As I stated the kit was used.
Looking over the directions I noticed it said to use #17 (step 17) M8 Stud Bolt.

Well, I don't have these. I know I can find them and have them either delivered or find them at a specialty store but I have no idea how long they are.

Says that I need 3 of them. Anyone have any idea?

CrankyOldMan · 03-22-2013, 06:14 AM

I can take a look at my hardware this weekend and measure them for you.

wildmongoose26 · 03-22-2013, 09:37 AM

Starting the install tonight. Probably wont get to that point until tomorrow

CTScott · 03-22-2013, 12:07 PM

The English instructions don't have the lengths, but the Japanese set that I have does.

Those stud bolts are M8x45, which (looking at the hardware removed from when I installed mine) are actually the same as the two end OEM studs (the rest of the OEM ones are bolts). So, you may be able to just pick up one of the 90126-08026 from your dealer, and reuse the other two in the inner positions, where the Blitz instructions call for them.

03-22-2013, 12:07 PM	#4
CTScott ULTIMATE View User's Garage Drives: 09 5dr LB, 2x 08 3dr LB Join Date: Oct 2008 Location: USA, CT Posts: 13,460	The English instructions don't have the lengths, but the Japanese set that I have does. Those stud bolts are M8x45, which (looking at the hardware removed from when I installed mine) are actually the same as the two end OEM studs (the rest of the OEM ones are bolts). So, you may be able to just pick up one of the 90126-08026 from your dealer, and reuse the other two in the inner positions, where the Blitz instructions call for them. __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
List of Boosted Yarisworld Members	whooppee777	Forced Induction Forum	262	11-23-2022 05:49 AM
2008 vitzRs clone+fixed pulley blitz...	blacksandiegovitz	Forced Induction Forum	5	12-05-2010 01:26 PM
Blitz throttle controller	808_Yaris	Performance Modifications	43	10-22-2009 04:36 AM
BLITZ HAS CLOSED?????	ROCKLAND TOYOTA	General Yaris / Vitz Discussion	12	08-13-2009 05:35 AM
GI: OFFICIAL BLITZ YARIS	laszlo	Cars for Sale by private party	11	11-25-2008 05:05 AM

03-22-2013, 03:01 AM	#1
wildmongoose26 Drives: 09 5dr Yaris Join Date: Mar 2009 Location: Dallas, TX Posts: 443	Blitz missing hardware (what length) As I stated the kit was used. Looking over the directions I noticed it said to use #17 (step 17) M8 Stud Bolt. Well, I don't have these. I know I can find them and have them either delivered or find them at a specialty store but I have no idea how long they are. Says that I need 3 of them. Anyone have any idea?

03-22-2013, 06:14 AM	#2
CrankyOldMan 2ZR swap. DO IT! Ask how! View User's Garage Drives: 09 Meteoric Metallic HB Join Date: Feb 2011 Location: West Michigan Posts: 2,333	I can take a look at my hardware this weekend and measure them for you.

03-22-2013, 09:37 AM	#3
wildmongoose26 Drives: 09 5dr Yaris Join Date: Mar 2009 Location: Dallas, TX Posts: 443	Starting the install tonight. Probably wont get to that point until tomorrow