|
06-06-2016, 01:56 PM | #1 |
Drives: 09 Meteoric Metallic 3 door HB Join Date: Jul 2010
Location: Atlanta Georgia
Posts: 419
|
Putting out some feelers.
Hey guys, I have a few parts I want to sell. I don't currently have pictures but I can get them.
I have a set of Tanabe coilovers, tanabe exhaust, Weapon R intake, and Blitz supercharger. I'd like to sell them all together and get 2k for everything, but if anyone wants a certain item i'll separate it. About the items: The coilovers I ran for about a year, for a little under 10k miles. I opted to get some silk road coilovers because I wanted the extra adjustability. The exhaust is fine, just a little dirty and one little scrape under the tip. I went custom with my exhaust and didn't need it anymore. The intake I ran for a good long while, but when I went turbo I no longer needed it. The intake filter is bent a little due to it rubbing against my headlight, but it still works just fine. The Blitz supercharger I took off due to going turbo. I ran it for about a year and got it used. When I got it the previous seller didn't tell me the clutch wasn't working, so it's welded as a fixed pulley, you won't get the clutch system. I went for the welding route because it was almost impossible to find replacement parts for that clutch. I also slightly stripped the adjuster screw on the bracket (sorry, noob mistake), but it still works just fine if you use a hex head on a ratchet or similar. I'll throw in the engine cover for anyone that wants the supercharger. I've never had a problem with any of these parts, i'm only selling because i've upgraded and/or gone custom and I don't really need them taking up space in my garage. Thanks! -Alex EDIT: Now with pictures! Last edited by Black_griffin6; 06-06-2016 at 09:35 PM. Reason: Adding pictures. |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
License plate bracket for '09 that doesn't require putting holes in the bumper? | BennyLava | General Yaris / Vitz Discussion | 16 | 03-10-2013 03:08 AM |
Putting end links back on? | Taiyaki | Wheels, Tires and Suspension Forum sponsored by The Tire Rack | 5 | 06-19-2009 05:57 PM |
hard time putting bumper back on | ezhacker1 | DIY / Maintenance / Service | 4 | 05-03-2009 08:59 PM |
ATTN: Everyone putting HID's in their halogen setups. STOP IT! | Ran Kizama | Cosmetic Modifications (Exterior/Interior) | 47 | 11-03-2008 11:59 AM |
Will putting new lowering springs damage original shock absorbers in the long run? | Joel Leong | Wheels, Tires and Suspension Forum sponsored by The Tire Rack | 20 | 06-07-2006 08:30 AM |