|
06-20-2006, 02:14 PM | #1 |
Drives: 350z, supra, xb, 240sx Join Date: May 2006
Location: Gilbert, AZ
Posts: 9
|
Perrin Crank Pulley
If the Yaris is using the same motor as the xa and xb the perrin crank pulley could work.
Just FYI |
06-20-2006, 07:14 PM | #2 | |
Super Moderator
|
Quote:
Last edited by Chris07LB; 06-21-2006 at 09:53 AM. |
|
06-21-2006, 02:12 AM | #3 |
maintenance of momentum
|
I would assume any of the actual engine parts will fit, be it spark plugs or cams (if they even exist for the scions), but ancillaries may be slghtly different due to chassis design and engine bay layout (like intakes).
What I would like to know is if the suspension components are compatable or not... |
06-21-2006, 10:47 AM | #4 |
Only Happy When it Rains
|
They're not. The suspension is different in the yaris. The pickup points are slightly different.
__________________
Colin Chapman disciple |
06-21-2006, 05:41 PM | #5 |
Drives: 350z, supra, xb, 240sx Join Date: May 2006
Location: Gilbert, AZ
Posts: 9
|
as mentioned in one of the tein threads they are releasing coilovers in september for suspension.
besides some of the cusco parts i do not know. if the transmission is the same the perrin short shifter might work.(i'm pretty sure it is) the perring SS should work and they are throw adjustable. We hope to get a Yaris in our shop soon to look into parts fitment with more detail. |
07-07-2006, 12:28 AM | #6 |
Another question... :D
Drives: Scion tC 06 Join Date: Jul 2006
Location: Puerto Rico
Posts: 70
|
I think there even is a strocker kit for xBs, At least I heard about the development on them. Don't know how much will they upper too.
__________________
*One tire nearer to my goal* |
02-22-2007, 12:08 PM | #7 |
Drives: Scions Join Date: Feb 2007
Location: Louisville, KY
Posts: 55
|
The xB pulley will not work. Well it might but would not be ideal. The Yaris uses a single belt design while the xB runs two belts off the crank pulley.
|
|
|