Resetting a Scan Guage II? - Toyota Yaris Forums

CKaelin · 11-19-2008, 10:37 AM

I loaned my scan guage to a friend with a tacoma. I have not been able to get it recalibrated to my Yaris since I've gotten it back. I think I may have furthered the problem after filling up. I adjusted the % to 100 asssuming that meant the tnak was 100% full. Any advice on how to rest the scan guage?

Thanks in advance!

Bob_VT · 11-19-2008, 11:12 AM

You have to go through the setup and remember when you FILL the tank you shoud have to do that 2x. It has a flash memory so there is no real reset.... just new setup.

The manual is available on line.

Remember the Yaris Fuel Cut Off should be set to 21

CKaelin · 11-19-2008, 11:40 AM

Quote:

Originally Posted by Bob_VT

You have to go through the setup and remember when you FILL the tank you shoud have to do that 2x. It has a flash memory so there is no real reset.... just new setup.

The manual is available on line.

Remember the Yaris Fuel Cut Off should be set to 21

I had done the set up: tank size, fuel, engine size etc.. I had not set the Fuel Cut off it was at 0. When I fill up do I have to adjust the percentage shown or should I leave that alone?

Thanks Bob!

Bob_VT · 11-19-2008, 12:13 PM

Leave the percentage alone and remember to run the tank down about 3/4 after 2 fill ups it should be accurate again.

CKaelin · 11-20-2008, 08:41 AM

Well I found the magic "reset to defaults" reset button that noone thought exists. Not sure how exactly but I did. Then followed the set up. It's working great once again.. =) I will "refill" today aswell..

11-19-2008, 10:37 AM	#1
CKaelin Drives: 2008 Yaris LB 5 speed Join Date: Oct 2008 Location: Boxborough, MA Posts: 140	Resetting a Scan Guage II? I loaned my scan guage to a friend with a tacoma. I have not been able to get it recalibrated to my Yaris since I've gotten it back. I think I may have furthered the problem after filling up. I adjusted the % to 100 asssuming that meant the tnak was 100% full. Any advice on how to rest the scan guage? Thanks in advance! __________________ My other ride's a Gixxer!

11-19-2008, 11:12 AM	#2
Bob_VT View User's Garage Drives: 08 Yaris LB Join Date: Oct 2008 Location: Vermont Posts: 1,704	You have to go through the setup and remember when you FILL the tank you shoud have to do that 2x. It has a flash memory so there is no real reset.... just new setup. The manual is available on line. Remember the Yaris Fuel Cut Off should be set to 21 __________________ some people are little slinkies. . . . .they are really good for nothing. . . .but they still bring a smile to your face when you push them down a flight of stairs. Come to the DARKSIDE..... We have candy

11-19-2008, 12:13 PM	#4
Bob_VT View User's Garage Drives: 08 Yaris LB Join Date: Oct 2008 Location: Vermont Posts: 1,704	Leave the percentage alone and remember to run the tank down about 3/4 after 2 fill ups it should be accurate again. __________________ some people are little slinkies. . . . .they are really good for nothing. . . .but they still bring a smile to your face when you push them down a flight of stairs. Come to the DARKSIDE..... We have candy

11-20-2008, 08:41 AM	#5
CKaelin Drives: 2008 Yaris LB 5 speed Join Date: Oct 2008 Location: Boxborough, MA Posts: 140	Well I found the magic "reset to defaults" reset button that noone thought exists. Not sure how exactly but I did. Then followed the set up. It's working great once again.. =) I will "refill" today aswell.. __________________ My other ride's a Gixxer!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Temp guage and compass in Rear view mirror	Chaad32	Cosmetic Modifications (Exterior/Interior)	10	10-30-2020 07:47 PM
Scan Guage II for Rent...	CKaelin	Fuel Economy Forum	7	11-02-2008 01:07 AM
Scan Gauge on Sedan	Geelmeel	General Yaris / Vitz Discussion	6	09-23-2007 05:52 PM
Guage face and Needles	drell42	Cosmetic Modifications (Exterior/Interior)	0	07-15-2007 02:24 PM
scan gauge thingy???	davembfan	General Yaris / Vitz Discussion	6	07-06-2007 05:39 AM