 |
 |
|
|
11-06-2011, 07:45 AM
|
#1 |
  
Drives: 2008 5 Door Liftback Auto Join Date: Oct 2011
Location: Canada
Posts: 157
|
Anybody used this double-din fascia?
I am thinking about using this
http://www.dynamicsounds.co.uk/conne...l-p-15203.html Someone here must've used this...How's the quality? Does the color match the stock silver? Fit ok, gaps even? Thanks.
__________________
1999 Honda Prelude Base 5 speed (summer driver) 2008 5 Door Liftback Auto |
|
|
|
11-06-2011, 09:11 AM
|
#2 |
|
Drives: Yaris 2006 Join Date: Oct 2011
Location: Sweden
Posts: 4
|
I bought that from dynamics sound and its NOT CT24TY22! The hole for the stereo is 180mm wide, and does not work with Metra kit. (wich is 200mm wide)
And the quality was really crap!.. I ended up buying the Toyota genuin part and use the who back sidebrackets from dynamicsound. I contacted dynamicsounds and they were total jerks, and didn't want to help! |
|
|
|
|
11-06-2011, 09:27 AM
|
#3 |
|
Drives: 2008 5 Door Liftback Auto Join Date: Oct 2011
Location: Canada
Posts: 157
|
My goal is not to use any kits, but have a standard narrower opening. I have an aftermarket double din stereo with a Scorche side panels sitting in the factory fascia. If I had the fascia that is 180 wide than my radio would fit without side panels.
No need for brackets for a double din unit...the factory ones work fine. can you elaborate on bad quality?
__________________
1999 Honda Prelude Base 5 speed (summer driver) 2008 5 Door Liftback Auto |
|
|
|
|
11-06-2011, 11:03 AM
|
#4 |
|
Drives: Yaris 2006 Join Date: Oct 2011
Location: Sweden
Posts: 4
|
I see. It would fit then, but the quality is really poor. All the edges are very rough. How it would look mounted, I dont know..
|
|
|
|
|
11-06-2011, 11:16 AM
|
#5 |
|
Drives: 2008 5 Door Liftback Auto Join Date: Oct 2011
Location: Canada
Posts: 157
|
^ thanks, sounds like I should leave it as is. which isn't really that bad.
Is my understanding correct - toyota doesn't make double din fascias for a liftback?
__________________
1999 Honda Prelude Base 5 speed (summer driver) 2008 5 Door Liftback Auto |
|
|
|
|
11-06-2011, 02:12 PM
|
#6 |
Drives: 06 Polar White 5dr, 13 Soul 4u Join Date: Oct 2008
Location: Georgetown, Ontario, Canada
Posts: 5,743
|
Are you aware of this thread? http://www.yarisworld.com/forums/sho...&highlight=180
A bunch of us have these. They are genuine Toyota so fitment and finish is perfect. Some DDIN HUs do however experience fitment issues as the bezel opening is not true to North American DDIN spec.
__________________
|
|
|
|
|
11-06-2011, 02:30 PM
|
#7 |
|
Drives: 2008 5 Door Liftback Auto Join Date: Oct 2011
Location: Canada
Posts: 157
|
Thank you.
__________________
1999 Honda Prelude Base 5 speed (summer driver) 2008 5 Door Liftback Auto |
|
|
|
 |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| For Sale: Double Din Radio Trim (180mm opening) for Liftback | CTScott | Items for Sale by private party | 12 | 06-19-2012 11:05 AM |
| Is Yaris HB 2007 Double Din or Single Din? | ediaz_pr | In Car Entertainment + Electronics (audio / video / alarm) | 3 | 04-09-2010 07:41 PM |
| Is this the correct Double DIN? | laer899 | In Car Entertainment + Electronics (audio / video / alarm) | 4 | 02-10-2010 09:29 AM |
| FS: Garmin GPS Unit w/ ProClip Mounts, 180mm Double Din Trim Piece | IsLNdbOi | Items for Sale by private party | 2 | 08-23-2009 02:37 AM |
| Double DIN DVD in-dash players | fat45s | In Car Entertainment + Electronics (audio / video / alarm) | 49 | 02-28-2009 01:49 PM |
Linear Mode
