Fog Light Help

[cm07yaris]

Originally Posted by CTScott

If you swap hu and hl then high and low functionality will be reversed. Did the new stalk replace the existing and the factory connector plugged back in?

Yup, ordered it from my local dealer, fit perfect, and the plug went right in. That's why I'm so confused...

[kenora]

Can you tell me how much the new stalk was please?

[cm07yaris]

Originally Posted by kenora

Can you tell me how much the new stalk was please?

Dealer price is like $96.17 USD, fortunately I had gotten a coupon in the mail a day before it arrived.

[CTScott]

Originally Posted by cm07yaris

Yup, ordered it from my local dealer, fit perfect, and the plug went right in. That's why I'm so confused...

OK - So, new OEM plug and play stalk. Did you wire up the fogs, or were they already in and wired to a separate switch?

[cm07yaris]

Originally Posted by CTScott

OK - So, new OEM plug and play stalk. Did you wire up the fogs, or were they already in and wired to a separate switch?

Installed the fogs myself. From the fogs there is a ground wire which I grounded by the driver side headlight, and another wire that I wired into the plug in the fuse box under the hood. Plugged the Toyota relay under the dash. Then installed the stalk and plugged in the harness.

[CTScott]

Originally Posted by cm07yaris

Installed the fogs myself. From the fogs there is a ground wire which I grounded by the driver side headlight, and another wire that I wired into the plug in the fuse box under the hood. Plugged the Toyota relay under the dash. Then installed the stalk and plugged in the harness.

So, the only wires you actually had to connect were the ground and the fuse box connection. In that case double check the connection point in the fuse box to make sure that you're in the right position in the connector.