|
01-27-2009, 11:44 AM | #1 |
First DIY oil change but...
I just did the first oil and oil filter change (5k miles) but when I was trying to loose the oil filter every thing turn into a night mare!
The dam oil filter was tight as hell, I end up getting it out, but took me almost 2 hours do get it done! Happy Yaris
__________________
. My system may not blow your ears, but it will sweeten your senses. CLA 250, 4MATIC |
|
01-27-2009, 11:54 AM | #2 |
╚══════════RN
|
I just did mine today too, 5K. Not my first oil change ever though.
I was pissed because the oil filter wrench I have worked on the stock filter, but not my new Hastings one. Blah, now next change I have to buy another. What oil and filter did you go with?
__________________
42.88 |
01-27-2009, 12:00 PM | #3 |
Mobil and Fram I recall
__________________
. My system may not blow your ears, but it will sweeten your senses. CLA 250, 4MATIC |
|
01-27-2009, 12:06 PM | #4 |
toyota
Drives: 2007 Yaris RS Blazed Join Date: Oct 2006
Location: toronto, canada
Posts: 3,637
|
can i change oil on this car without jacking it??? i have trd springs on though..
|
01-27-2009, 12:08 PM | #5 |
Me... I had to lift it up; the ground effect spoilers all around get in the way, at least for me.
__________________
. My system may not blow your ears, but it will sweeten your senses. CLA 250, 4MATIC |
|
01-27-2009, 12:13 PM | #6 |
╚══════════RN
|
I would say no, unless you're small. That was my original plan.
But I have these tiny ass ramps -- maybe 4 inches tall -- and that was more than enough space.
__________________
42.88 |
01-27-2009, 12:15 PM | #7 |
toyota
Drives: 2007 Yaris RS Blazed Join Date: Oct 2006
Location: toronto, canada
Posts: 3,637
|
|
01-27-2009, 12:20 PM | #8 |
╚══════════RN
|
...they're 4 inches tall. I'm pretty sure all the oil is out...
The earth is curved, and you were parked on the edge. All your oil didn't get out. =P
__________________
42.88 |
01-27-2009, 12:30 PM | #9 |
Drives: '08 Yaris sedan , '08 Liftback Join Date: Oct 2008
Location: Northeast
Posts: 643
|
here's a easy to do ramp . Take a good piece of 2"x10" ( treated be better ) and cut it 24 > 30 inches long . The one end make an angled cut across so easier to drive up on . Then take scrap piece of wood , 2"x 2" ( or similar ) and cut 10 inches long and nail across the other end as a stopper for tire . Place in front of drivers side wheel and then drive car onto your homemade ramp . This way the car will be tilted towards the drain pan / plug for better drainage of oil ( pan slopes to passengers side of car ) . Should have just enough room to crawl under and perform oil change . Hope this makes sense .
|
01-27-2009, 12:53 PM | #10 |
Drives: '08 Yaris sedan , '08 Liftback Join Date: Oct 2008
Location: Northeast
Posts: 643
|
here's a pic of ramp , http://s49.photobucket.com/albums/f2...t=IMG_1243.jpg , just do one layer of 2'x10" .
|
01-27-2009, 01:00 PM | #11 |
Banned
Drives: 2009 Yaris liftback Join Date: Nov 2008
Location: CT
Posts: 350
|
I am not small and no you don't need ramps (DF210's). Oil filter simply comes off with a set of channel lock pliers...then re-installation is just hand tight. No tools required aside from the 14mm box end for the drain plug. Now that I have the fujitomo valve...I do oil changes with no tools at all. Quick and simple.
|
01-27-2009, 02:15 PM | #12 | |
Quote:
Interesting, could you explain a little bit more "fujitomo valve"? Thanks
__________________
. My system may not blow your ears, but it will sweeten your senses. CLA 250, 4MATIC |
||
01-27-2009, 02:22 PM | #13 | |
Super Moderator
|
Quote:
__________________
--[ FORUM RULES ]--[ SEARCHING TIPS ]--[ EYELIDS PICS ]--[ RBK SPOILER ]--[ BEST/WORST INVESTMENTS ]--
|
|
01-27-2009, 02:27 PM | #14 |
toyota
Drives: 2007 Yaris RS Blazed Join Date: Oct 2006
Location: toronto, canada
Posts: 3,637
|
so can we change the oil without jacking it.. i dont have fujitomo valve
|
01-27-2009, 02:28 PM | #15 | |
Drives: 2008 Yaris Liftback (Sprocket) Join Date: Oct 2008
Location: San Antonio, Texas!
Posts: 2,799
|
Quote:
Cheers! M2 |
|
01-27-2009, 02:50 PM | #16 |
Mucho Cool,
but doesn't looks like "hit me" I know that this may not happen. I think I'm getting one. What is the best tool to take the oil filter out? link please, if you have one.
__________________
. My system may not blow your ears, but it will sweeten your senses. CLA 250, 4MATIC |
|
01-27-2009, 03:17 PM | #17 | |
ULTIMATE
Drives: 09 5dr LB, 2x 08 3dr LB Join Date: Oct 2008
Location: USA, CT
Posts: 13,460
|
Quote:
Looks like the F-103 is the correct one for the Yaris (and my Xterra as well). |
|
01-27-2009, 03:40 PM | #18 |
ULTIMATE
Drives: 09 5dr LB, 2x 08 3dr LB Join Date: Oct 2008
Location: USA, CT
Posts: 13,460
|
I just ordered two of the valves. In doing some searching I found coupon code YM4 - It is a 10% discount, which in my case offset the $5 shipping charge.
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
DIY: CHANGE MANUAL TRANNY OIL | ttufrosty | DIY / Maintenance / Service | 157 | 09-07-2018 01:43 PM |
Super Amazing Oil Change DIY | id3379 | DIY / Maintenance / Service | 34 | 11-28-2008 01:20 PM |
DIY - oil change | kurokoma-kun | DIY / Maintenance / Service | 7 | 11-20-2008 12:12 PM |
DIY Oil Change | Bassmonkey | DIY / Maintenance / Service | 42 | 02-19-2007 08:37 PM |
Motor oil debate - interesting info but a long read. | mikeukrainetz | General Yaris / Vitz Discussion | 6 | 12-10-2006 08:16 PM |