Neffy wraped my sedan radio trim pics inside.... - Toyota Yaris Forums

YarisSedan · 12-17-2009, 05:12 PM

So I took the time to make very tight corners and use very little material when wraping it around to attach from behind. That way when isntalled it looks completely flush and has a oem look. From pics ive seen not necessarily on yarisworld the edges always look a little rough. Once installed they make it so the trim dose not sit flush.

The trick really is stretch and pull when you are isntalling it and taking scissors to make cuts on every edge bend or turn and fold back to get clean lines. I tried to use rubber gloves but they kept sticking so ended up having to use my bare hands. It was a mess getting the glue off. The second piece i did i used this product called gloves in a bottle. Puts a thin layer of protection on your hands. So you still have dexterity but makes removing the mess off your hands when your done easier.

Here you can see the lines how it fits just like OEM with all the edges clean.

I think it blends with the interior color of my car well. Dosnt look too out of place cause of the dark charcoal color scheme. Now only the silver looks out of place. Next project is to either paint it black or have it color matched flint mica by a body shop.

minired5stby · 12-17-2009, 05:14 PM

Pretty clean man nice

SilverBack · 12-17-2009, 06:17 PM

Looks really good. I would have the silver repainted a flat back to match the interior. I plan on doing it myself.

YarisSedan · 12-17-2009, 06:19 PM

Yeah i think flat black is the way it should have came from the factory that silver they used looks really cheap.

1NZYaris1 · 12-17-2009, 06:44 PM

Very Nice

YAR1S · 12-17-2009, 08:05 PM

OOOO I just got some neffy in the mail today... how hard was it to wrap those pieces? and how did you stretch it around the corners/hold it in place?

YarisSedan · 12-17-2009, 08:08 PM

Quote:

Originally Posted by YAR1S

OOOO I just got some neffy in the mail today... how hard was it to wrap those pieces? and how did you stretch it around the corners/hold it in place?

Its not really hard. Just spray it first let it get tacky and then apply. The edges i just made 2 slits on every corner and then pulled them tight and held down with my finger till it dried. Once everything was dry i went back with a razor and trimmed off as much as possible so its not bulky around the edges when it snaps in place. Its tricky if your trying to do it wearing gloves. To get it right your going to get your hands a little sticky.

I used this stuff on my hands first....

That way you dont have to wear gloves and then the sticky residue just washes right off when your done. Its like a invisible pair of really thin gloves.

cali yaris · 12-17-2009, 08:58 PM

^ that's a COOL product - and nice job with the Neffy wrap!

Kioshi · 12-17-2009, 09:15 PM

That looks clean! No bubbles/bumps or anything. If i ever decide to have the carbon fiber look, I'm hitting you up for service.

Really nice edges...

RHDVIPbB · 12-17-2009, 10:20 PM

Nice. Can I send you my trim pieces and have you wrap them for me?

I guess I want to know how hard it is to remove if you mess up a section.

YarisSedan · 12-17-2009, 10:31 PM

Was bored and made a carbon fiber license plate frame. I am going to put a few layers of clear coat on it in the morning and see how it turns out..

TEHxFALLEN V1.2 · 12-18-2009, 12:17 AM

NICE!

Looks like the real CF NRG license plate frames we carry at Micro Image.

YarisSedan · 12-18-2009, 12:33 AM

Quote:

Originally Posted by TEHxFALLEN V1.2

NICE!

Looks like the real CF NRG license plate frames we carry at Micro Image.

Yeah lol thats where i got the idea. I figured since i had some leftover i can make my own for free. I sprayed it down with about 10 coats of clearcoat. Going to polish it up tomorrow with rubbing compound and see how it looks .

fnkngrv · 04-26-2010, 05:35 PM

Very nice take on wrapping...kind of the reverse since many peeps are wrapping the actual console...

12-17-2009, 05:12 PM	#1
YarisSedan Drives: 08 Yaris Sedan Join Date: Oct 2008 Location: California - Bay Area Posts: 2,773	Neffy wraped my sedan radio trim pics inside.... So I took the time to make very tight corners and use very little material when wraping it around to attach from behind. That way when isntalled it looks completely flush and has a oem look. From pics ive seen not necessarily on yarisworld the edges always look a little rough. Once installed they make it so the trim dose not sit flush. The trick really is stretch and pull when you are isntalling it and taking scissors to make cuts on every edge bend or turn and fold back to get clean lines. I tried to use rubber gloves but they kept sticking so ended up having to use my bare hands. It was a mess getting the glue off. The second piece i did i used this product called gloves in a bottle. Puts a thin layer of protection on your hands. So you still have dexterity but makes removing the mess off your hands when your done easier. Here you can see the lines how it fits just like OEM with all the edges clean. I think it blends with the interior color of my car well. Dosnt look too out of place cause of the dark charcoal color scheme. Now only the silver looks out of place. Next project is to either paint it black or have it color matched flint mica by a body shop. __________________ http://www.cardomain.com/ride/3210549

12-17-2009, 06:17 PM	#3
SilverBack Joey View User's Garage Drives: '14 Scion xD 5-speed Join Date: Oct 2008 Location: El Monte, Ca Posts: 3,529	Looks really good. I would have the silver repainted a flat back to match the interior. I plan on doing it myself. __________________ Formerly owned Met-Met. '07 Yaris LB 5-speed. A forum post should be like a skirt: Long enough to cover the subject but short enough to keep things interesting. "I don't have an anger problem. I have an idiot problem." -Hank Hill

12-17-2009, 06:19 PM	#4
YarisSedan Drives: 08 Yaris Sedan Join Date: Oct 2008 Location: California - Bay Area Posts: 2,773	Yeah i think flat black is the way it should have came from the factory that silver they used looks really cheap. __________________ http://www.cardomain.com/ride/3210549

12-17-2009, 06:44 PM	#5
1NZYaris1 View User's Garage Drives: Yaris Join Date: Oct 2008 Location: New Zealand Posts: 2,566	Very Nice __________________ http://www.microimageonline.com/forums/index.php

12-17-2009, 08:58 PM	#8
cali yaris ULTIMATE View User's Garage Drives: 07 Yaris Turbo Join Date: May 2007 Location: Canoga Park, CA Posts: 14,859	^ that's a COOL product - and nice job with the Neffy wrap! __________________ Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific.

12-17-2009, 05:14 PM	#2
minired5stby View User's Garage Drives: Yaris S liftback Join Date: Oct 2008 Location: San Diego Posts: 759	Pretty clean man nice

12-17-2009, 09:15 PM	#9
Kioshi Heart Up! Vitz Drives: トヨタ Vitz Join Date: Jun 2007 Location: Fremont, CA Posts: 2,582	That looks clean! No bubbles/bumps or anything. If i ever decide to have the carbon fiber look, I'm hitting you up for service. Really nice edges...

12-17-2009, 10:20 PM	#10
RHDVIPbB Right beside you, wave Drives: 08 PBM Yaris Sedan Join Date: Oct 2008 Location: Louisville, KY Posts: 742	Nice. Can I send you my trim pieces and have you wrap them for me? I guess I want to know how hard it is to remove if you mess up a section. __________________ 2008 Toyota Yaris Sedan. Pacific Blue Mica. Custom vinyl eyebrows, color matched interior trim pieces, Vios lip spoiler, 17" Maas rims 2010 Scion xB 7.0 Release Series. 1535 of 2000. Murasaki. Stock with TRD springs.

12-17-2009, 10:31 PM	#11
YarisSedan Drives: 08 Yaris Sedan Join Date: Oct 2008 Location: California - Bay Area Posts: 2,773	Was bored and made a carbon fiber license plate frame. I am going to put a few layers of clear coat on it in the morning and see how it turns out.. __________________ http://www.cardomain.com/ride/3210549

12-18-2009, 12:17 AM	#12
TEHxFALLEN V1.2 Banned View User's Garage Drives: '08 Lexus IS-F Join Date: Oct 2008 Location: Calabasas, CA Posts: 1,890	NICE! Looks like the real CF NRG license plate frames we carry at Micro Image. __________________ DON'T LIKE ME? TAKE A SEAT WITH THE REST OF THE BITCHES WHO ARE WAITING FOR ME TO GIVE A FUCK. Sponsored by: Micro Image http://microimageonline.com

04-26-2010, 05:35 PM	#14
fnkngrv Mr. 155 and climbing View User's Garage Drives: Seriously Modded 07 Sedan Join Date: Jun 2006 Location: In The Hotbox Posts: 4,742	Very nice take on wrapping...kind of the reverse since many peeps are wrapping the actual console... __________________ Team Tiamat Racing on Facebook Youtube Channel: Team Tiamat Racing *Class record holder in Land Speed @ 154.5mph for 1.5 mile and 145.5mph in the mile in the F (2.016 to 3.014 L), G (1.524 to 2.015 L), and H (1.016 to 1.523 L) classes.*

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
NEWS: TOYOTA REVEALS ALL-NEW YARIS SEDAN AT 2006 LOS ANGELES AUTO SHOW	VitzBoy	General Yaris / Vitz Discussion	7	09-20-2023 07:50 AM
Toyota Yaris Sedan Some Pics	Rudeshady	Central and South America	6	06-03-2009 10:06 AM
Help with 09 yaris sedan kenwood radio?	Fiosguy	Cosmetic Modifications (Exterior/Interior)	13	11-10-2008 10:59 PM
Sirius Satellite Radio Installed In Sedan	sleuzze	Cosmetic Modifications (Exterior/Interior)	3	09-02-2007 08:50 PM