|
03-11-2013, 02:40 PM | #1 |
Drives: 2007 Yaris Sedan Join Date: Mar 2013
Location: Alberta
Posts: 5
|
2007 Sedan Radio Replacement
Hi, new here...
I've done a number of searches on the topic, and before I dive in on the project I have a few questions. I just want to replace with a new deck with aux. So i'm picking up a DEH-2000 for $20 off local classifieds later today. So I was going to use a Scosche Kit off ebay which includes: Scosche TA2077B 2007 -2010 Toyota Yaris Radio Installation Dash Kit TA02B Radio Wiring Harness Comes to about $30 shipped. So what I want to know is, will this work without any additional parts? As in I pull out the stock radio put the new radio into the Dash Kit, and plug in the harness into the car wiring and into the back of the new radio and put it back in and be done with it.... Or would I require to order more parts or do wire splicing... |
03-11-2013, 02:54 PM | #2 |
Mr. 155 and climbing
Drives: Seriously Modded 07 Sedan Join Date: Jun 2006
Location: In The Hotbox
Posts: 4,742
|
Do you have the integrated radio with the single piece fascia or do you currently have a black headunit?
__________________
Team Tiamat Racing on Facebook Youtube Channel: Team Tiamat Racing Class record holder in Land Speed @ 154.5mph for 1.5 mile and 145.5mph in the mile in the F (2.016 to 3.014 L), G (1.524 to 2.015 L), and H (1.016 to 1.523 L) classes. |
03-11-2013, 03:30 PM | #3 |
Drives: 2007 Yaris Sedan Join Date: Mar 2013
Location: Alberta
Posts: 5
|
Not my picture, but it looks like this one:
http://i.imgur.com/1SwD7.jpg |
03-11-2013, 04:00 PM | #4 |
Mr. 155 and climbing
Drives: Seriously Modded 07 Sedan Join Date: Jun 2006
Location: In The Hotbox
Posts: 4,742
|
You should be good.
__________________
Team Tiamat Racing on Facebook Youtube Channel: Team Tiamat Racing Class record holder in Land Speed @ 154.5mph for 1.5 mile and 145.5mph in the mile in the F (2.016 to 3.014 L), G (1.524 to 2.015 L), and H (1.016 to 1.523 L) classes. |
03-14-2013, 03:03 AM | #5 |
Drives: 2007 Yaris Sedan Join Date: Mar 2013
Location: Alberta
Posts: 5
|
Sorry for silly questions, this is my first time dealing with car audio and i don't want to screw it up.
So here's two pics of the back of the unit, and the cables it came with... Now i'd prefer plug and play and not have to splice any wires together or anything so.... question is do i have to splice wires together? |
03-14-2013, 03:25 AM | #6 | |
Drives: Swift Join Date: Nov 2012
Location: Scranton
Posts: 5
|
Quote:
Last edited by mohitjames; 03-15-2013 at 12:30 AM. |
|
03-15-2013, 06:24 PM | #7 |
Drives: 2007 Yaris Sedan Join Date: Mar 2013
Location: Alberta
Posts: 5
|
Okay, i think I understand now, I have to cut off the current harness off the unit, and splice on the Toyota harness onto the end of those wires, correct?
|
03-15-2013, 10:03 PM | #8 |
Read this post and what i wrote and posted
http://www.yarisworld.com/forums/showthread.php?t=41812 Where i circled is what needs to be cut off...You bought it used, they sent your the harness from there car along with the radio harness The second picture is the one that has the Yaris harness that needs to go connected either where i circled the red connectors....or you can cut off the harness and connect it there...Match up the colors. . . .
__________________
Audio is under Construction Kenwood KDC-X794 Hifonics Zeus ZXI6.5C 6.5-Inch 2-Way Component Speaker System - AUTOTEK ATX65CX 6.5-Inch Hifonics BXi 1210D - Crunch PowerZone P1400.4 (2)12 inch Kicker CVR's - 0 gauge from battery to Distribution block - 4 Gauge Power/Grounds to amps - Duralast Yellow Top - Big 3 Last edited by _S7V7N_; 03-16-2013 at 12:19 AM. |
|
04-27-2013, 04:59 PM | #9 |
Drives: 2007 Yaris Sedan Join Date: Mar 2013
Location: Alberta
Posts: 5
|
Just to follow up since I now have some time...
So on on the Pioneer side I have (bolded means i'm confused) gray Gray/black purple purple/black Green green/black white white/black Red yellow black All of the above are matched up fine. blue/white (!! - there's a solid blue on the TA02B harness I got - they're both for power antenna/amp) - so do these two go together? Additionally there's an orange wire on the TA02B harness for illumination/dimmer, and there's no matching on the pioneer side, so do I just cap it off then and the rest should be good? Looking at the old pic, seems that they didn't connect the blue to blue white, and just capped off the orange. |
04-27-2013, 08:28 PM | #10 |
Correct. They're not used. Unless you want to connect an amp. Illumination is used on some headunits. But soumds like yours dont need it.
__________________
Audio is under Construction Kenwood KDC-X794 Hifonics Zeus ZXI6.5C 6.5-Inch 2-Way Component Speaker System - AUTOTEK ATX65CX 6.5-Inch Hifonics BXi 1210D - Crunch PowerZone P1400.4 (2)12 inch Kicker CVR's - 0 gauge from battery to Distribution block - 4 Gauge Power/Grounds to amps - Duralast Yellow Top - Big 3 |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
NEWS: TOYOTA REVEALS ALL-NEW YARIS SEDAN AT 2006 LOS ANGELES AUTO SHOW | VitzBoy | General Yaris / Vitz Discussion | 7 | 09-20-2023 07:50 AM |
07 Sedan Factory Integrated Radio - SoCal Locals First Dibs | eii | Items for Sale by private party | 6 | 11-30-2010 08:29 PM |
2007 Yaris Pricing Info ! | YarisBueller | New YARIS Purchase Forum | 104 | 06-24-2009 04:54 PM |
2007 Sedan, Anyone added #08586-5370? | pmgYARIS | General Yaris / Vitz Discussion | 3 | 05-25-2009 10:46 PM |