Blitz Fuel Controller Issue - Toyota Yaris Forums

wildmongoose26 · 03-24-2013, 05:19 PM

Got everything buttoned up last night. Clutch engages, etc. Builds boost, no leaks.
At idle we run 14.5 A/F so that's normal.
The light on the dial lights up when we get into boost and not vacuum. Normal.

The light on the fuel controller box does not light up at all. Not sure if it is supposed to be on ALL the time or if its only supposed to come on while in boost like the light on the dial.

In boost in stays roughly around 14.5 but that is just in the air, not while driving.

Any advise?

Is the light on the fuel controller supposed to be on all the time?

Angela

CTScott · 03-24-2013, 07:31 PM

Quote:

Originally Posted by wildmongoose26

Got everything buttoned up last night. Clutch engages, etc. Builds boost, no leaks.
At idle we run 14.5 A/F so that's normal.
The light on the dial lights up when we get into boost and not vacuum. Normal.

The light on the fuel controller box does not light up at all. Not sure if it is supposed to be on ALL the time or if its only supposed to come on while in boost like the light on the dial.

In boost in stays roughly around 14.5 but that is just in the air, not while driving.

Any advise?

Is the light on the fuel controller supposed to be on all the time?

Angela

The light on the little switch assembly should light when the clutch is engaged by the fuel controller.

wildmongoose26 · 03-24-2013, 10:11 PM

But only when its engaged? Not constant?
Both the light on the dial and on the fuel controller box?

CTScott · 03-24-2013, 10:50 PM

Quote:

Originally Posted by wildmongoose26

But only when its engaged? Not constant?
Both the light on the dial and on the fuel controller box?

My fuel controller doesn't have a light on it, just the dial does. And, the light on the dial just comes on when the SC is engaged.

wildmongoose26 · 03-25-2013, 12:29 AM

That light works. The A/F seems a bit off. Going to look at it a bit more tomorrow.

Everything engages, drove the car and A/F goes down to 12.5 after a little while. But its a dial type gauge from Glowshift so it may just react a little slowly.

TOLMACH · 03-25-2013, 01:19 AM

Where is your sensor installed?

Also just curious where did you install the gauge itself?

wildmongoose26 · 03-25-2013, 02:01 AM

180 degrees from the stock o2 sensor and put the gauge under the HVAC controls

Tima122 · 03-25-2013, 06:52 AM

Toyota bB

Tima122 · 03-25-2013, 06:59 AM

Toyota bB
Splitfire
Injen

wildmongoose26 · 03-25-2013, 10:12 AM

I have no idea how the pictures are relevant

1.5 · 03-25-2013, 10:45 AM

Now you know he's boosted too

cali yaris · 03-25-2013, 10:51 AM

Quote:

But its a dial type gauge from Glowshift so it may just react a little slowly.

narrowband or wideband?

wildmongoose26 · 03-25-2013, 11:22 AM

Wideband

TOLMACH · 03-25-2013, 01:36 PM

Quote:

Originally Posted by wildmongoose26

180 degrees from the stock o2 sensor and put the gauge under the HVAC controls

Thanks

My sensor is in the same location. You also seem to have found an interesting place for your gauge.

cali yaris · 03-25-2013, 04:09 PM

Does 180 degrees mean the two sensors are pointing at each other in exactly the same place inside the pipe?

wildmongoose26 · 03-25-2013, 05:25 PM

Bot at each other. But in the same area of pipe yes. Too close would be weird an restrict air alot in that one place.

wildmongoose26 · 03-26-2013, 10:20 AM

Finished. Everything works. Correct a/f the dhole way under boost. Idle a/f is perfect. Engages when it should according the the dial. It was a wiring problem. Used t taps like it said to and they almost cute the wires to the ecu. Had a friend solder them and its perfect can't even tell there is any extra wiring!!

1.5 · 03-26-2013, 10:37 AM

awesome great news. Lets see some vids now. Any plan for dyno/tune?

03-24-2013, 05:19 PM	#1
wildmongoose26 Drives: 09 5dr Yaris Join Date: Mar 2009 Location: Dallas, TX Posts: 443	Blitz Fuel Controller Issue Got everything buttoned up last night. Clutch engages, etc. Builds boost, no leaks. At idle we run 14.5 A/F so that's normal. The light on the dial lights up when we get into boost and not vacuum. Normal. The light on the fuel controller box does not light up at all. Not sure if it is supposed to be on ALL the time or if its only supposed to come on while in boost like the light on the dial. In boost in stays roughly around 14.5 but that is just in the air, not while driving. Any advise? Is the light on the fuel controller supposed to be on all the time? Angela

03-25-2013, 10:45 AM	#11
1.5 Form>Function Drives: 07 Flint Sedan Join Date: Dec 2009 Location: Tampa Posts: 4,018	Now you know he's boosted too __________________ Instagram: @southernstreets_phil Facebook.com/southernstreetsempire

03-25-2013, 04:09 PM	#15
cali yaris ULTIMATE View User's Garage Drives: 07 Yaris Turbo Join Date: May 2007 Location: Canoga Park, CA Posts: 14,859	Does 180 degrees mean the two sensors are pointing at each other in exactly the same place inside the pipe? __________________ Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific.

03-26-2013, 10:37 AM	#18
1.5 Form>Function Drives: 07 Flint Sedan Join Date: Dec 2009 Location: Tampa Posts: 4,018	awesome great news. Lets see some vids now. Any plan for dyno/tune? __________________ Instagram: @southernstreets_phil Facebook.com/southernstreetsempire

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Blitz Fuel Controller Issue	wildmongoose26	Forced Induction Forum	1	05-06-2013 05:31 PM
Yaris Fuel Pump	HTM Yaris	General Yaris / Vitz Discussion	12	03-22-2012 03:34 AM
NEED ENGINE CHECK LIGHT CODE LIST	Attitude	Forced Induction Forum	12	04-11-2011 06:38 PM
Blitz throttle controller	808_Yaris	Performance Modifications	43	10-22-2009 04:36 AM
Blitz owners: fuel controller question	s3r3nity	Forced Induction Forum	28	05-30-2009 09:19 PM

03-24-2013, 10:11 PM	#3
wildmongoose26 Drives: 09 5dr Yaris Join Date: Mar 2009 Location: Dallas, TX Posts: 443	But only when its engaged? Not constant? Both the light on the dial and on the fuel controller box?

03-25-2013, 12:29 AM	#5
wildmongoose26 Drives: 09 5dr Yaris Join Date: Mar 2009 Location: Dallas, TX Posts: 443	That light works. The A/F seems a bit off. Going to look at it a bit more tomorrow. Everything engages, drove the car and A/F goes down to 12.5 after a little while. But its a dial type gauge from Glowshift so it may just react a little slowly.

03-25-2013, 01:19 AM	#6
TOLMACH Drives: soarer Join Date: Feb 2011 Location: Beautiful British Columbia Posts: 954	Where is your sensor installed? Also just curious where did you install the gauge itself?

03-25-2013, 02:01 AM	#7
wildmongoose26 Drives: 09 5dr Yaris Join Date: Mar 2009 Location: Dallas, TX Posts: 443	180 degrees from the stock o2 sensor and put the gauge under the HVAC controls

03-25-2013, 10:12 AM	#10
wildmongoose26 Drives: 09 5dr Yaris Join Date: Mar 2009 Location: Dallas, TX Posts: 443	I have no idea how the pictures are relevant

03-25-2013, 11:22 AM	#13
wildmongoose26 Drives: 09 5dr Yaris Join Date: Mar 2009 Location: Dallas, TX Posts: 443	Wideband

03-25-2013, 05:25 PM	#16
wildmongoose26 Drives: 09 5dr Yaris Join Date: Mar 2009 Location: Dallas, TX Posts: 443	Bot at each other. But in the same area of pipe yes. Too close would be weird an restrict air alot in that one place.

03-26-2013, 10:20 AM	#17
wildmongoose26 Drives: 09 5dr Yaris Join Date: Mar 2009 Location: Dallas, TX Posts: 443	Finished. Everything works. Correct a/f the dhole way under boost. Idle a/f is perfect. Engages when it should according the the dial. It was a wiring problem. Used t taps like it said to and they almost cute the wires to the ecu. Had a friend solder them and its perfect can't even tell there is any extra wiring!!