lug nutz - Toyota Yaris Forums

mastaofdisasta · 05-05-2009, 11:49 AM

So i just ordered 15x6.5 rota attack wheels and df210s. Anyone know if im going to need aftermarket lugs, and if so what kind is recomended?

schleppy · 05-05-2009, 12:11 PM

I would say you probably will. I picked up a set of black aftermarket tuner lugs from autozone, and they just BARELY fit.

If you search ebay for 12x1.5 lugs (pick a color) you'll find what you need.

MPC Motorsports · 05-05-2009, 12:15 PM

Buy your lugs from the same place you get your wheels. They will know what fits. I got new wheels for my daughters's xB last month from Discount Tire and did not buy aftermarket lugs since I already had them on the car since I was replacing damaged wheels. Well, the existing lugs were too short for the new rims. Had to buy new lugs anyway.

Russelt3hPirate · 05-05-2009, 01:35 PM

do not cheap out on lug nuts.

you can get a middle road set for ~$50.

I really really like kyokugen 7 sided ones but they stopped making them.

Mutkei has a spline drive set that should work in the Rotas.

you will most likely need a 17mm hex set (not 19 or 21).

Taiyaki · 05-12-2009, 10:56 PM

Quote:

If you search ebay for 12x1.5 lugs (pick a color) you'll find what you need.

So any 12x1.5mm lug will work with any rota wheel? Im pretty new to this kind of thing. and still dont fully understand what lug fits what wheel

Russelt3hPirate · 05-13-2009, 10:02 AM

No, you'll need "tuner" sized lugs which are a 17mm hex not a 19mm hex.

ROCKLAND TOYOTA · 05-13-2009, 10:47 AM

buy from here:
http://www.jlbmotorsports.com/rims/lugnuts-list.html

Taiyaki · 05-13-2009, 03:11 PM

^So will the muteki, SR35, and or Gorilla closed end (red) in the link above work with rota subzero? it doesnt say if its 17mm.

Thanks

battleversiontc · 05-13-2009, 03:28 PM

taiyaki go rons performance cuz they sell lugs ive ran pretty much every rim with theres if you still doubt it take one rim down and they will find one that matches and there pretty cheap and there lugs are good

Russelt3hPirate · 05-13-2009, 04:07 PM

Quote:

Originally Posted by Taiyaki

^So will the muteki, SR35, and or Gorilla closed end (red) in the link above work with rota subzero? it doesnt say if its 17mm.

Thanks

the SR35 is 19mm

the Muteki spline drive should fit.

severous01 · 05-13-2009, 04:24 PM

mcguard...they have anything you could want. shallow, deep, chrome, anodized, 'tuner' or tight fit...capped, open, stainless, titanium, magnesium, locks, lugs, whatever you want.

and they're lifetime guaranteed if you dont use power tools on them

bearda · 05-13-2009, 04:50 PM

Quote:

Originally Posted by severous01

mcguard...they have anything you could want. shallow, deep, chrome, anodized, 'tuner' or tight fit...capped, open, stainless, titanium, magnesium, locks, lugs, whatever you want.

and they're lifetime guaranteed if you dont use power tools on them

+1. McGard's spline drive tuner lugs seem to be much sturdier than any of the gorillas or mutekis I've seen.

mastaofdisasta · 05-13-2009, 08:35 PM

purple lugs on bronze wheels? Win or Fail?

Taiyaki · 05-13-2009, 11:32 PM

Quote:

taiyaki go rons performance cuz they sell lugs ive ran pretty much every rim with theres if you still doubt it take one rim down and they will find one that matches and there pretty cheap and there lugs are good

Cool ill hit up Ron's see what kind of lugs they have. Hope not too expensive.

05-05-2009, 11:49 AM	#1
mastaofdisasta Drives: yaris Join Date: Oct 2008 Location: amerika Posts: 258	lug nutz So i just ordered 15x6.5 rota attack wheels and df210s. Anyone know if im going to need aftermarket lugs, and if so what kind is recomended? __________________ ballin on a budget.

05-05-2009, 01:35 PM	#4
Russelt3hPirate l33t3st Asshole Drives: MY07 Yaris Liftback Join Date: Nov 2006 Location: Epcot Posts: 588	do not cheap out on lug nuts. you can get a middle road set for ~$50. I really really like kyokugen 7 sided ones but they stopped making them. Mutkei has a spline drive set that should work in the Rotas. you will most likely need a 17mm hex set (not 19 or 21). __________________

05-13-2009, 10:02 AM	#6
Russelt3hPirate l33t3st Asshole Drives: MY07 Yaris Liftback Join Date: Nov 2006 Location: Epcot Posts: 588	No, you'll need "tuner" sized lugs which are a 17mm hex not a 19mm hex. __________________

05-13-2009, 03:28 PM	#9
battleversiontc View User's Garage Drives: 08 vip yaris Join Date: Oct 2008 Location: 808 Posts: 501	taiyaki go rons performance cuz they sell lugs ive ran pretty much every rim with theres if you still doubt it take one rim down and they will find one that matches and there pretty cheap and there lugs are good __________________ 08 junction produce belta almost done and ready for paint 06 junction produce tc 604 bhp 445tq ddriven still trying for 700+hp 90 crx sir ls vtec turbo 755 hp mecp masters certified

05-13-2009, 08:35 PM	#13
mastaofdisasta Drives: yaris Join Date: Oct 2008 Location: amerika Posts: 258	purple lugs on bronze wheels? Win or Fail? __________________ ballin on a budget.

05-05-2009, 12:11 PM	#2
schleppy I love momentum. View User's Garage Drives: 2009 Yaris LB, Red Join Date: Feb 2009 Location: Boston, MA Posts: 587	I would say you probably will. I picked up a set of black aftermarket tuner lugs from autozone, and they just BARELY fit. If you search ebay for 12x1.5 lugs (pick a color) you'll find what you need.

05-05-2009, 12:15 PM	#3
MPC Motorsports Drives: 2008 Yaris S Sedan Join Date: Apr 2009 Location: Oklahoma Posts: 78	Buy your lugs from the same place you get your wheels. They will know what fits. I got new wheels for my daughters's xB last month from Discount Tire and did not buy aftermarket lugs since I already had them on the car since I was replacing damaged wheels. Well, the existing lugs were too short for the new rims. Had to buy new lugs anyway.

05-13-2009, 10:47 AM	#7
ROCKLAND TOYOTA TRIM HUNTER View User's Garage Drives: 2007 BLAZIN BLUE YARIS 3 DR Join Date: May 2006 Location: ROCKLAND COUNTY NY Posts: 2,088	buy from here: http://www.jlbmotorsports.com/rims/lugnuts-list.html

05-13-2009, 03:11 PM	#8
Taiyaki アキバ製 View User's Garage Drives: 09' White LB, Celica GTS Join Date: Apr 2009 Location: Honolulu, HI Posts: 524	^So will the muteki, SR35, and or Gorilla closed end (red) in the link above work with rota subzero? it doesnt say if its 17mm. Thanks

05-13-2009, 04:24 PM	#11
severous01 Drives: 2008 yaris, stripped, red Join Date: Jan 2009 Location: SE Texas Posts: 977	mcguard...they have anything you could want. shallow, deep, chrome, anodized, 'tuner' or tight fit...capped, open, stainless, titanium, magnesium, locks, lugs, whatever you want. and they're lifetime guaranteed if you dont use power tools on them

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
LUG NUTS	elmo	Wheels, Tires and Suspension Forum sponsored by The Tire Rack	8	05-01-2009 06:31 AM
WTB : lug nuts and locks for 18" trd	AlphaFox	Willing to Buy by private party	0	04-19-2009 08:04 PM
lug nuts...?	at3GG	Wheels, Tires and Suspension Forum sponsored by The Tire Rack	16	03-26-2009 10:16 PM
Cheap Lug Nuts?	KwonSau	Wheels, Tires and Suspension Forum sponsored by The Tire Rack	1	06-06-2007 12:51 AM
Lug Nuts for Konig Helium Wheels?	OK Yaris	Wheels, Tires and Suspension Forum sponsored by The Tire Rack	4	09-19-2006 05:58 PM