|
01-17-2020, 04:02 PM | #1 |
Drives: 2007 Toyota Yaris 3 door Join Date: Sep 2018
Location: Arizona
Posts: 404
|
Laille beatrush rear frame reinforcement
Anyone have that reinforcement installed in place of the rear bumper crash bar? Does it help the vehicle chassis twist? Anyone noticeable differences in weight as well. Looks interesting to get especially since I have ultra racing bracing everywhere.
|
01-20-2020, 03:30 PM | #2 |
Drives: 06 Polar White 5dr, 13 Soul 4u Join Date: Oct 2008
Location: Georgetown, Ontario, Canada
Posts: 5,740
|
As with a lot of braces, I suspect if a manufacturer can find two points to attach something, they'll develop a brace and convince you it's needed. Save your money.
__________________
|
04-13-2020, 08:34 AM | #3 |
Drives: Yaris RS2 2012 Join Date: Oct 2016
Location: Manila, Philippines
Posts: 20
|
What Ultra Racing bracing / chassis bars do you have sir? If you have a complete set, i doubt you’ll notice any significant difference with the laile beatrush rear bumper crash bar
|
04-16-2020, 07:59 AM | #4 |
Drives: 2007 Toyota Yaris 3 door Join Date: Sep 2018
Location: Arizona
Posts: 404
|
I have Trd rear sway bar, ultra racing front and rear strut bars, ultra racing fender braces, ultra racing chassis rail braces, ultra racing exhaust crossover bar, and ultra racing front sway bar, I’m on bilstein b8 shocks and trim s tech springs, the car handles like it’s on rails, don’t ever have to use brakes on hot laps at wild horse pass motor sports park, I keep similar lap times with wrxs and miatas haha
|
04-16-2020, 08:47 AM | #5 | |
Drives: Yaris RS2 2012 Join Date: Oct 2016
Location: Manila, Philippines
Posts: 20
|
Quote:
__________________
Toyota Yaris TRD RS2 Black (2012). 1.5L 1NZ-FE NA. TRD T3 Silver forged wheels. Michelin PS4 tires K&N filters. DC Sports headers. Fujitsubo Authorize S exhaust. Unichip ECU tuning. 285mm drilled/slotted rotors. Stainless steel braided brake likes. Brembo disc pads. Eibach ProKit. KYB Lowfer Sports. Eibach ProAlignment. Eibach 12mm rear hubcentric wheelspacer. Ultra Racing. Front & rear strut bars. Front, middle & rear lower member bars. Fender bars. Interior room bar. Rear sway bar. |
|
04-19-2020, 02:54 AM | #6 |
Drives: 2007 Toyota Yaris 3 door Join Date: Sep 2018
Location: Arizona
Posts: 404
|
It goes in the middle under the exhaust tunnel, just 2 points and crosses under the exhaust pipe, and yes I want to do the spoon subframe collars, idk about the interior one but I’ll look into it, I’m also looking at Cusco pillow all mounts for my shocks.
|
04-23-2020, 07:00 AM | #7 |
Drives: Yaris RS2 2012 Join Date: Oct 2016
Location: Manila, Philippines
Posts: 20
|
I see i get it! It’s the middle lower chassis bar. Here is a picture of my interior room bar. It stiffens up the middle portion. My wife calls it “foot rest” hahaha agree with replacing the bushings especially if your car is already nearing a decade. I plan to do that as well. Bushings and braces would almost be like putting a rollcage inside
__________________
Toyota Yaris TRD RS2 Black (2012). 1.5L 1NZ-FE NA. TRD T3 Silver forged wheels. Michelin PS4 tires K&N filters. DC Sports headers. Fujitsubo Authorize S exhaust. Unichip ECU tuning. 285mm drilled/slotted rotors. Stainless steel braided brake likes. Brembo disc pads. Eibach ProKit. KYB Lowfer Sports. Eibach ProAlignment. Eibach 12mm rear hubcentric wheelspacer. Ultra Racing. Front & rear strut bars. Front, middle & rear lower member bars. Fender bars. Interior room bar. Rear sway bar. |
04-23-2020, 09:39 AM | #8 |
Drives: 2007 Toyota Yaris 3 door Join Date: Sep 2018
Location: Arizona
Posts: 404
|
That’s pretty cool man, it’s just too bad not many people with these cars are left, just slowly phasing out, you plan on doing a motor build on yours? I’m thinking of doing ITB conversion to cable throttle and all motor build, but for now it’s a reliable daily driver that can do the occasion track rear up if it needs to haha
|
04-23-2020, 01:25 PM | #9 |
this thing? Picture is literally a decade old now..I still use it. if you still have your stock american rear bar then i doubt it'll do anything besides weight saving. JDM RS models dont have anything in that spot so that's why its made. It helps those models but not american cars with the huge bar you already have. |
|
04-23-2020, 11:42 PM | #10 |
Drives: Yaris RS2 2012 Join Date: Oct 2016
Location: Manila, Philippines
Posts: 20
|
I’m planning to maintain my 1NZ 1.5L motor build and keep it reliable sir. I’m having alot of fun with the Yaris as is. Just trying to improve the ride, safety, over all reliability and fun to drive factor. It’s a street setup build with basic bolt ons. I can keep up with most of the high powered cars given they can only go farther in a straight line hahaha
“it’s more fun to drive a slow car fast than to drive a fast car slow.”
__________________
Toyota Yaris TRD RS2 Black (2012). 1.5L 1NZ-FE NA. TRD T3 Silver forged wheels. Michelin PS4 tires K&N filters. DC Sports headers. Fujitsubo Authorize S exhaust. Unichip ECU tuning. 285mm drilled/slotted rotors. Stainless steel braided brake likes. Brembo disc pads. Eibach ProKit. KYB Lowfer Sports. Eibach ProAlignment. Eibach 12mm rear hubcentric wheelspacer. Ultra Racing. Front & rear strut bars. Front, middle & rear lower member bars. Fender bars. Interior room bar. Rear sway bar. |
04-25-2020, 12:01 AM | #11 | |
Drives: 2007 Toyota Yaris 3 door Join Date: Sep 2018
Location: Arizona
Posts: 404
|
Quote:
|
|
04-25-2020, 06:53 PM | #12 |
if anything its weight savings. it took a few hits over the years too..its a quality piece. If you ever want to go jdm rear end too you're golden.
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
NEWS: TOYOTA REVEALS ALL-NEW YARIS SEDAN AT 2006 LOS ANGELES AUTO SHOW | VitzBoy | General Yaris / Vitz Discussion | 7 | 09-20-2023 07:50 AM |
When will the Yaris hit the showrooms at dealers? | Petrolhead | New YARIS Purchase Forum | 181 | 11-28-2011 07:03 AM |
Dealer: Disabling the seat belt chime is now illegal? | schleppy | Cosmetic Modifications (Exterior/Interior) | 13 | 04-18-2009 04:43 PM |
Rear frame brace | jinxor | Performance Modifications | 3 | 04-07-2009 12:35 AM |
solid torsion bar bushings... the best rear anti roll upgrade | turboyaris | Wheels, Tires and Suspension Forum sponsored by The Tire Rack | 28 | 12-05-2008 11:37 PM |