|
06-06-2016, 08:50 AM | #1 |
Drives: 07 HB YARIS, 15 JUKE, 00 TUNDR Join Date: Mar 2007
Location: Johnstown, PA
Posts: 320
|
Parting out my car. :(
Well I have decided to part out most everything on my car. At this point I am probably looking to keep the engine and some of the other performance parts, but it never hurts to shoot me an offer.
So mostly all the trim and other other odds and ends are up for grabs at this point. Just ask if you want something in particular. Someone want all the plaid interior? FRONT.jpg SIDE1.jpg SIDE2.jpg I will try and get pictures of everything as I go along tearing it apart, but here are some quick prices: Coilovers shipped in the US - $550 They will come with the oem strut tops and mounts, so these are ready to bolt right in. They have less than 1000 miles on them. One rear strut has the paint rubbed down a little. COILOVERS1.jpg COILOVERS2.jpg COILOVERS3.jpg COILOVERS4.jpg 2zrfe engine with a/c compressor, alt, starter, wiring harness (auto), and ECU (auto)- $600 pickup, probably around $800 shipped freight. RPM longtube header and midpipe (slip joint welding solid) and DC sports axleback form the xD - $850 shipped in the US I WOULD DO $1500 SHIPPED FREIGHT, THE ENGINE AND EXHAUST. 1nzfe engine - $150 pickup, probably $250 shipped freight Upper dash panel - $150 shipped US Headliner with plaid wrap - $150 pickup, probably like $225 shipped freight (because of size) headliner.jpg 60/40 rear bench seat and all plastic trim for it - $250 pickup / $350 shipped UPS Front seats - $100 each pickup / $150 shipped each Painted parts around radio and a/c controls - $50 shipped Black trim pieces on either side of painted parts - $20 shipped each Upper glove box lids - $40 shipped US each Lower glove box - $45 shipped US Entire carpet, decent condition - $175 shipped Both rear 8" custom fiberglass sub boxes (no subs) - $75 shipped in the us $350 shipped with the subs. The subs run $200 each on crutchfield, where I bought them from. subs.jpg Center console - $60 shipped US Front calipers from xD/Corolla, pads, and Yaris SE front rotors. Coated in G2 black 2 part caliper painted. Less than 1500 miles - $250 shipped in the us. MI red brakes SS lines, less than 1500 miles - $100 shipped us Let me know if there are any other specifics you are looking for.
__________________
Project so far: 2zrfe swap, Megan racing coilovers, TRD rear sway bar, whiteline bushings, RPM long tube header, midpipe, and DC sports xD exhaust, brake upgrade in front, MI stainless braided lines all around, matte paintjob, Takada cold air intake, various gauges, rear seat and belts removed. Future: Turbo. Last edited by brushforhire; 08-15-2016 at 05:32 AM. Reason: New pics |
06-06-2016, 01:52 PM | #2 |
Drives: Charcoal 2012 Yaris SE 5 Speed Join Date: May 2016
Location: Smithfield, VA
Posts: 145
|
Hey, I'm Interested in the coil overs and rear sway bar.
|
06-06-2016, 05:11 PM | #3 |
Drives: 07 HB YARIS, 15 JUKE, 00 TUNDR Join Date: Mar 2007
Location: Johnstown, PA
Posts: 320
|
I would to the coilovers at $550 shipped in the US, and the rear sway bar at $150 shipped in the US. Both bought new and have only like 1000 miles on them.
Also EVERYTHING is up for grabs. Engine, RPM header, midpipe, DC sports muffler, etc. Just let me know what you are looking for. I also have an extra 1NZFE engine if anyone is interested in an extra to build for boost or something.
__________________
Project so far: 2zrfe swap, Megan racing coilovers, TRD rear sway bar, whiteline bushings, RPM long tube header, midpipe, and DC sports xD exhaust, brake upgrade in front, MI stainless braided lines all around, matte paintjob, Takada cold air intake, various gauges, rear seat and belts removed. Future: Turbo. |
06-06-2016, 05:34 PM | #4 |
2ZR swap. DO IT! Ask how!
Drives: 09 Meteoric Metallic HB Join Date: Feb 2011
Location: West Michigan
Posts: 2,333
|
I'm not sure on the timing of when I can buy, but I'm interested in the whole exhaust. Possibly the stainless lines, too. Are the front lines toast?
|
06-06-2016, 05:54 PM | #5 |
Drives: 07 HB YARIS, 15 JUKE, 00 TUNDR Join Date: Mar 2007
Location: Johnstown, PA
Posts: 320
|
Front brakes, calipers, rotors, pads, lines, everything are all good. Really everything behind the front rails is good. Only the intake manifold got damaged, as far as I can tell so far. The engine and everything still starts.
__________________
Project so far: 2zrfe swap, Megan racing coilovers, TRD rear sway bar, whiteline bushings, RPM long tube header, midpipe, and DC sports xD exhaust, brake upgrade in front, MI stainless braided lines all around, matte paintjob, Takada cold air intake, various gauges, rear seat and belts removed. Future: Turbo. |
06-06-2016, 06:16 PM | #6 |
Drives: 2007 Toyota Yaris LB Join Date: Mar 2007
Location: Bay Area, CA
Posts: 76
|
How much for driver seat belt?
|
06-06-2016, 09:28 PM | #7 |
Drives: 07 HB YARIS, 15 JUKE, 00 TUNDR Join Date: Mar 2007
Location: Johnstown, PA
Posts: 320
|
$35 shipped in the US.
__________________
Project so far: 2zrfe swap, Megan racing coilovers, TRD rear sway bar, whiteline bushings, RPM long tube header, midpipe, and DC sports xD exhaust, brake upgrade in front, MI stainless braided lines all around, matte paintjob, Takada cold air intake, various gauges, rear seat and belts removed. Future: Turbo. |
06-07-2016, 12:22 AM | #8 |
Drives: Charcoal 2012 Yaris SE 5 Speed Join Date: May 2016
Location: Smithfield, VA
Posts: 145
|
You have pictures of the coil overs?
|
06-07-2016, 05:07 AM | #9 |
Drives: 07 HB YARIS, 15 JUKE, 00 TUNDR Join Date: Mar 2007
Location: Johnstown, PA
Posts: 320
|
I will try and get some pics up, asap.
__________________
Project so far: 2zrfe swap, Megan racing coilovers, TRD rear sway bar, whiteline bushings, RPM long tube header, midpipe, and DC sports xD exhaust, brake upgrade in front, MI stainless braided lines all around, matte paintjob, Takada cold air intake, various gauges, rear seat and belts removed. Future: Turbo. |
06-07-2016, 08:20 AM | #10 |
Drives: Yaris 07 HB Join Date: Apr 2011
Location: Sabana Grande, PR
Posts: 70
|
How much for the DC Header?
|
06-07-2016, 09:13 AM | #11 |
Drives: 07 HB YARIS, 15 JUKE, 00 TUNDR Join Date: Mar 2007
Location: Johnstown, PA
Posts: 320
|
I don't have a DC Header. It is the RPM long tube header and midpipe for 2zrfe. I have the dc sports muffler for the Scion xD, but fits up the the exhaust. I don't think it would bolt to the yaris exhaust, though.
__________________
Project so far: 2zrfe swap, Megan racing coilovers, TRD rear sway bar, whiteline bushings, RPM long tube header, midpipe, and DC sports xD exhaust, brake upgrade in front, MI stainless braided lines all around, matte paintjob, Takada cold air intake, various gauges, rear seat and belts removed. Future: Turbo. |
06-07-2016, 03:50 PM | #12 |
Drives: 2007 Toyota Yaris LB Join Date: Mar 2007
Location: Bay Area, CA
Posts: 76
|
|
06-08-2016, 10:16 AM | #13 |
Drives: Yaris 07 HB Join Date: Apr 2011
Location: Sabana Grande, PR
Posts: 70
|
And you sell the antenna base?
|
06-09-2016, 03:22 PM | #14 |
Drives: 2015 yaris Join Date: Aug 2015
Location: groves texas
Posts: 78
|
i'd be interested in the stock engine.how many miles,etc.
|
06-09-2016, 03:46 PM | #15 |
Drives: 07 HB YARIS, 15 JUKE, 00 TUNDR Join Date: Mar 2007
Location: Johnstown, PA
Posts: 320
|
Antenna base would be $70 shipped in the US
The stock 1NZFE engine has 132k miles on it. I owned it from 0 miles. Oil changes done religiously every 3-5k miles. I worked at a Toyota dealer, so they always did everything to it. Never had any issues, and ran like a champ.
__________________
Project so far: 2zrfe swap, Megan racing coilovers, TRD rear sway bar, whiteline bushings, RPM long tube header, midpipe, and DC sports xD exhaust, brake upgrade in front, MI stainless braided lines all around, matte paintjob, Takada cold air intake, various gauges, rear seat and belts removed. Future: Turbo. |
06-11-2016, 12:17 PM | #16 |
Drives: 2015 yaris Join Date: Aug 2015
Location: groves texas
Posts: 78
|
heck try to sell it local,but i'm 77619 zip code.shipping is such a pain I know.
|
06-11-2016, 07:11 PM | #17 |
Drives: 07 HB YARIS, 15 JUKE, 00 TUNDR Join Date: Mar 2007
Location: Johnstown, PA
Posts: 320
|
I will get pics up next week, when I get back from vacation. Gonna tear the car down more.
__________________
Project so far: 2zrfe swap, Megan racing coilovers, TRD rear sway bar, whiteline bushings, RPM long tube header, midpipe, and DC sports xD exhaust, brake upgrade in front, MI stainless braided lines all around, matte paintjob, Takada cold air intake, various gauges, rear seat and belts removed. Future: Turbo. |
06-14-2016, 05:01 PM | #18 |
Drives: 07 LB Join Date: Mar 2012
Location: West Harrison, NY
Posts: 9
|
I'm looking for the map light assembly + the plug from the stock wiring harness for it. I deleted mine for a custom GPS set up and used the wiring for a cigarette lighter plug ;-)
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
ImportRacer88's Photo Scavenger Hunt | ImportRacer88 | General Yaris / Vitz Discussion | 8 | 02-28-2012 04:19 AM |
Jerkratt - Photo Scavenger Hunt | Jerkratt | Photo-Video-Media Gallery | 3 | 03-04-2009 09:03 AM |
Darb - Photo Scavenger Hunt | Darb | Photo-Video-Media Gallery | 3 | 03-01-2009 09:02 PM |