|
10-15-2010, 10:24 AM | #1 |
Drives: Yaris ts 1.5 Join Date: Sep 2009
Location: Athens
Posts: 29
|
yaris ts 1.5 turbo
Hello my friends!!
I have a yaris ts 1.5 2004. I am looking forward to turbocharge it! My 1nz fe has the following and only changed components: 1) CP pistons 9:1 75mm (stock bore) 2) Crower rods and better rod bearings 3) stiffer valves and valve springs 4) toga engine bearings soon i will get a walbro 255L/h fuel pump and larger injectors. For ECU I will install a standalone Link g4 storm. The turbo I chose is the Garret2554R. When I put the turbo I will also put denso iridium spark plugs. My goal is to achieve maximum 230hp at the crank reliably. As for the injectors I will get 370cc or 440cc . which of the two would you choose? Last edited by Paris vvt-i; 10-15-2010 at 02:15 PM. |
10-18-2010, 03:19 AM | #2 |
Drives: Yaris ts 1.5 Join Date: Sep 2009
Location: Athens
Posts: 29
|
Anyone?????
|
10-18-2010, 10:03 AM | #3 |
ULTIMATE
Drives: 07 Yaris Turbo Join Date: May 2007
Location: Canoga Park, CA
Posts: 14,859
|
larger injectors for that power, you'll need them.
probably need a return line too. what turbo are you going to use?
__________________
Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific. |
10-18-2010, 10:10 AM | #4 |
Drives: Yaris ts 1.5 Join Date: Sep 2009
Location: Athens
Posts: 29
|
Thank you. I will use the GARRET 2554R!
|
10-18-2010, 11:21 AM | #5 |
ULTIMATE
Drives: 07 Yaris Turbo Join Date: May 2007
Location: Canoga Park, CA
Posts: 14,859
|
230 bhp is about 210 whp, you should be fine with the GT2554R. Good luck with the project, that will be a very fast car.
__________________
Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific. |
10-18-2010, 12:07 PM | #6 |
+1 with what garm said, go with the 440cc injectors just in case you're planning to upgrade your turbo in the future.
you can also check out this 1nz-fe here, the car made 200 whp using the GT2554R on automatic transmission with a meth kit and standalone ecu. by the way, hi garm long time no see! :)
__________________
454 whp, 1.7 bar boost, pump gas, water/meth. 501 whp, 2.2 bar boost, pump gas + avgas, no water/meth. www.viosturbo.com - World's first 500 WHP 1NZ-FE |
|
10-18-2010, 01:48 PM | #7 |
Yeah, nice idea. I've been contemplating on boosting my Yaris for a Loooooong time, I would like to follow you on this one, but funds wont allow it just yet.
|
|
10-18-2010, 05:18 PM | #8 |
Drives: Yaris ts 1.5 Join Date: Sep 2009
Location: Athens
Posts: 29
|
Thank you all of you! but this 1nzfe made 200whp with a completely stock motor????? I thought Garm had the max safe hp on a stock 1nzfe (182whp)??
|
10-18-2010, 08:13 PM | #9 |
ULTIMATE
Drives: 07 Yaris Turbo Join Date: May 2007
Location: Canoga Park, CA
Posts: 14,859
|
No one knows exactly how much power you can push vs. how long the motor will last.
__________________
Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific. |
10-18-2010, 09:21 PM | #10 |
Drives: Yaris LB Turbo Join Date: Aug 2006
Location: Miami FL
Posts: 782
|
|
10-18-2010, 09:48 PM | #11 |
ULTIMATE
Drives: 07 Yaris Turbo Join Date: May 2007
Location: Canoga Park, CA
Posts: 14,859
|
Well. someone figure it out the hard way. Please. LOL
__________________
Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific. |
10-18-2010, 09:57 PM | #12 |
Drives: Yaris LB Turbo Join Date: Aug 2006
Location: Miami FL
Posts: 782
|
Lost me on that one.....
|
10-18-2010, 10:58 PM | #13 |
ULTIMATE
Drives: 07 Yaris Turbo Join Date: May 2007
Location: Canoga Park, CA
Posts: 14,859
|
^ I mean someone go beat up on a stock motor until it gives up, so we can all learn.
__________________
Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific. |
10-18-2010, 11:51 PM | #14 |
Drives: Yaris LB Turbo Join Date: Aug 2006
Location: Miami FL
Posts: 782
|
got it.....
|
10-19-2010, 09:08 AM | #15 |
Drives: Yaris ts 1.5 Join Date: Sep 2009
Location: Athens
Posts: 29
|
I am also thinking of changing the transmission to one of a 2nz fe which has longer gear ratios
|
10-20-2010, 11:28 AM | #16 | |
Quote:
though this guy here has been pushing the stock 1nzfe motor with his turbo kit for more than 3 years, and is an often guest at the local track circuit.
__________________
454 whp, 1.7 bar boost, pump gas, water/meth. 501 whp, 2.2 bar boost, pump gas + avgas, no water/meth. www.viosturbo.com - World's first 500 WHP 1NZ-FE |
||
10-21-2010, 03:09 AM | #17 |
Drives: Yaris ts 1.5 Join Date: Sep 2009
Location: Athens
Posts: 29
|
240 whp?? on a stock motor????. by the way what exactly is that water/methanol kit?
|
11-13-2010, 12:08 PM | #18 |
Drives: Yaris ts 1.5 Join Date: Sep 2009
Location: Athens
Posts: 29
|
do you think that stock 2nzfe transmission will withstand 230hp?
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
NEWS: TOYOTA REVEALS ALL-NEW YARIS SEDAN AT 2006 LOS ANGELES AUTO SHOW | VitzBoy | General Yaris / Vitz Discussion | 7 | 09-20-2023 07:50 AM |
Bolt on turbo kit for our yaris! | aucorium | Forced Induction Forum | 57 | 02-02-2010 07:50 PM |
TURBO KIT for Yaris 1.3 or 1.5 | Giupo | Items for Sale by private party | 27 | 01-22-2010 11:01 AM |
Toyota Yaris I 1.5 Polished K&N Typhoon | FAB | Items for Sale by private party | 2 | 10-30-2009 03:57 AM |