FS: Turbo Kit and other goodies for cheap - Toyota Yaris Forums

Yoda · 08-29-2014, 02:28 PM

Sold my Yaris and got a BRZ so here is what I have for sale:
Custom turbo kit with garret gt28 rs turbo charger, synapse bov, vband clamps with 3" dp and tail wastgate with 14 psi spring
Halteck sprint 500 ecu
Aem True boost gauge
Aem oil pressure gauge
Aem Ugeo AFR gauge
Scanguage 2
550cc Fuel injectors

I will try to get pics up this weekend. I invested quite a bit into this kit but not looking to make a profit but help someone else to have a good time. Car dynoed at 258 whp and 254 tq at 13.8 psi. Price dropped to $1000. See post 14

Pics below of kit and other stuff I have laying around. Not sure how to make it look more organized but ehh

chapabig · 08-29-2014, 02:29 PM

where in florida are you located. im interested big time

KTS · 08-29-2014, 04:39 PM

If you are willing to sell parts separately I am interested in a manifold. That is a good price for the lot of stuff you have

Yoda · 08-29-2014, 07:59 PM

Quote:

Originally Posted by chapabig

where in florida are you located. im interested big time

Pm'd

Yoda · 08-29-2014, 08:00 PM

Quote:

Originally Posted by KTS

If you are willing to sell parts separately I am interested in a manifold. That is a good price for the lot of stuff you have

I might have an extra one around here but it would be for an internally gated turbo. Going to a football game this weekend when I will take some pictures when I get back.

malibuguy · 08-29-2014, 08:37 PM

Was that on a stock motor?

Golddeenoh · 08-29-2014, 09:37 PM

but I want it and can't afford it or my wife kills me.

ezhacker1 · 08-30-2014, 02:22 AM

Crazy price, should go fast. Cant wait for some pics.

KTS · 08-30-2014, 08:53 AM

Quote:

Originally Posted by Yoda

I might have an extra one around here but it would be for an internally gated turbo. Going to a football game this weekend when I will take some pictures when I get back.

that is great keep me posted...thank you

mr_miles · 08-30-2014, 06:58 PM

I've been wondering if that was on a stock engine also, lol. I wouldn't mind the power but I don't want to do a full build at the moment lol.

Freestylin · 08-30-2014, 11:09 PM

The stock motor can handle about 8psi of boost safely. Running anymore boost than that and you will compromise it's reliability. To run this kit long term it is highly suggested that you replace the stock internals with better parts.

Yoda · 08-31-2014, 09:29 AM

No the internals are not stock. Piston and rods and bored out just a bit. You would need to change the spring in the wastgate to an 8 psi spring n that should get u to 200whp on the stock motor. I ran 200whp for along time without issue just have to make sure your tune is good.

Ryze268 · 08-31-2014, 06:51 PM

Price for the extra manifold?

Yoda · 09-01-2014, 09:59 PM

Just got back in today and started to organize everything when I noticed something. Not sure how but the compressor wheel will not turn freely

I was able to turn it easily by hand when I took it off but now its hard to move. The blades are fine and I don't see any scratches on the walls. Not sure what exactly happened but it needs to be rebuilt. Could be an easy and cheap fix but I don't have the time to look into it. As a result I will be including it with the kit for free and knocking down the price to $1000. Pictures will come tomorrow I am too tired and a bit disappointed to deal with it now.

Yoda · 09-01-2014, 10:02 PM

Quote:

Originally Posted by Ryze268

Price for the extra manifold?

My Girlfriend tossed it apparently when we were moving last year.

Ryze268 · 09-02-2014, 08:54 PM

Is that intake manifold for a 3 bolt throttle body? I'm in dire need of one

Yoda · 09-02-2014, 08:56 PM

Quote:

Originally Posted by Ryze268

Is that intake manifold for a 3 bolt throttle body? I'm in dire need of one

Nope 4 bot. I think someone made an adapter for one.

Ryze268 · 09-02-2014, 11:10 PM

Quote:

Originally Posted by Yoda

Nope 4 bot. I think someone made an adapter for one.

Thanks, I have an adapter, it's 3 to 4 but not the other way around

Really wish I could buy your kit but shipping and customs would rape me

08-29-2014, 08:37 PM	#6
malibuguy Obsessed with 1.5L Drives: '10 PW Yaris Sedan Join Date: Feb 2011 Location: Westminster, MD Posts: 907	Was that on a stock motor? __________________ -Greg...the Exhaust Freak. -10 PW sedan 107whp/110wtq, full exhaust, suspension bits, TRD LSD -06 Highlander 3mzfe Limited AWD -82 Malibu, 1uzfe swap -97 Tercel coupe, 1nzfe/4.31 -96 Tercel coupe, Turbo 5efe, autoX -96 Tercel 4dr

08-29-2014, 09:37 PM	#7
Golddeenoh Takes corners too fast! View User's Garage Drives: Absolute Red 2009 Yaris HB Join Date: Apr 2012 Location: Columbia, SC Posts: 830	but I want it and can't afford it or my wife kills me. __________________ mods:15''Drag DR21 w/Nitto NeoGen 205/50R15, Tanabe DF210 lowering springs 1.6/1.8, TRD Rear Sway Bar, Tanabe Front Sway Bar, Micro Image Short Throw Shift Kit (both in and under), 8.64lbs flywheel, F1 Stage 4 Clutch, AEM Cold Air Intake (Red), Megan Racing Header, DC Sports Axle Back Exhaust, Micro Image Crank Pulley, NST lite Alternator Pulley, ARP Manifold Stud Kit,Tanabe Front Strut Tower Brace, ScanGuage II, Micro Image Silicone Radiator Hose Kit (Red), NRG Carbon Fiber Shift Knob (round), 2009-2011 Toyota Yaris Liftback Foglight kit, NRG Grounding Kit (Red), Hella Horns(Red),CF Hood

08-30-2014, 02:22 AM	#8
ezhacker1 Drives: Decepticon - Ravage Join Date: Nov 2008 Location: San Francisco Posts: 1,462	Crazy price, should go fast. Cant wait for some pics. __________________ Check out my Build thread: http://www.yarisworld.com/forums/showthread.php?t=52274

08-30-2014, 11:09 PM	#11
Freestylin Drives: 09 Blizzard Pearl RS LB Join Date: Sep 2009 Location: Calgary, Alberta Posts: 371	The stock motor can handle about 8psi of boost safely. Running anymore boost than that and you will compromise it's reliability. To run this kit long term it is highly suggested that you replace the stock internals with better parts. __________________ “On a given day, a given circumstance, you think you have a limit. And you then go for this limit and you touch this limit, and you think, 'Okay, this is the limit'. And so you touch this limit, something happens and you suddenly can go a little bit further. With your mind power, your determination, your instinct, and the experience as well, you can fly very high.” ― Ayrton Senna

08-31-2014, 06:51 PM	#13
Ryze268 Drives: 2002 JDM Vitz 1.3 Join Date: Feb 2013 Location: Antigua & Barbuda Posts: 287	Price for the extra manifold? __________________ 2000 JDM Vitz [2NZ-FE Crap-otmatic] < Now Manual Conversion complete Follow me on Instagram: instagram.com/itzkingjustin

08-29-2014, 02:29 PM	#2
chapabig 3dr Angry Bubble Drives: 07 Yaris HB Join Date: Jun 2014 Location: Tamarac, FL Posts: 55	where in florida are you located. im interested big time

08-29-2014, 04:39 PM	#3
KTS Drives: Vitz RS Join Date: Feb 2009 Location: Trinidad and Tobago Posts: 272	If you are willing to sell parts separately I am interested in a manifold. That is a good price for the lot of stuff you have

08-31-2014, 09:29 AM	#12
Yoda Drives: 2008 Black Sedan Join Date: Oct 2008 Location: FL Posts: 966	No the internals are not stock. Piston and rods and bored out just a bit. You would need to change the spring in the wastgate to an 8 psi spring n that should get u to 200whp on the stock motor. I ran 200whp for along time without issue just have to make sure your tune is good.

09-01-2014, 09:59 PM	#14
Yoda Drives: 2008 Black Sedan Join Date: Oct 2008 Location: FL Posts: 966	Just got back in today and started to organize everything when I noticed something. Not sure how but the compressor wheel will not turn freely I was able to turn it easily by hand when I took it off but now its hard to move. The blades are fine and I don't see any scratches on the walls. Not sure what exactly happened but it needs to be rebuilt. Could be an easy and cheap fix but I don't have the time to look into it. As a result I will be including it with the kit for free and knocking down the price to $1000. Pictures will come tomorrow I am too tired and a bit disappointed to deal with it now.

09-02-2014, 08:54 PM	#16
Ryze268 Drives: 2002 JDM Vitz 1.3 Join Date: Feb 2013 Location: Antigua & Barbuda Posts: 287	Is that intake manifold for a 3 bolt throttle body? I'm in dire need of one __________________ 2000 JDM Vitz [2NZ-FE Crap-otmatic] < Now Manual Conversion complete Follow me on Instagram: instagram.com/itzkingjustin