Anyone had an OE head unit apart? (aux port) - Toyota Yaris Forums

CoryM · 05-23-2012, 12:14 PM

Hey guys,

I have an 09 5dr with the factory aux port in the head unit face. I want to have an aux wire in the console/armrest so I can hide all the wires etc when parked. I was thinking about removing the head unit, taking it apart and soldering on another set of wires to run to an aux port in console. I am wondering if this is viable or not. As in, is there enough room to do this in the head unit?

Thanks for any input on my...... aux input

Cheers.

CTScott · 05-23-2012, 01:41 PM

My 09 5 door US Yaris had the external AUX jack via the connector on the back of the radio, so I haven't specifically seen the one you are referring to, but from my experience, there is a lot of open space within a double DIN head unit. So, you should have plenty of space to solder a set of wires parallel to the existing jack and bring them out.

CoryM · 05-23-2012, 09:42 PM

Thanks Scott. I didn't think it would be too tight in there but figured I would ask. I'll give it a go once I get caught up on a few other things.... OK, a lot of other things. Not enough time in a week anymore.

Thanks again.

05-23-2012, 12:14 PM	#1
CoryM Drives: 2009 5-door, 5-speed Join Date: Sep 2011 Location: White Rock BC Posts: 687	Anyone had an OE head unit apart? (aux port) Hey guys, I have an 09 5dr with the factory aux port in the head unit face. I want to have an aux wire in the console/armrest so I can hide all the wires etc when parked. I was thinking about removing the head unit, taking it apart and soldering on another set of wires to run to an aux port in console. I am wondering if this is viable or not. As in, is there enough room to do this in the head unit? Thanks for any input on my...... aux input Cheers.

05-23-2012, 01:41 PM	#2
CTScott ULTIMATE View User's Garage Drives: 09 5dr LB, 2x 08 3dr LB Join Date: Oct 2008 Location: USA, CT Posts: 13,460	My 09 5 door US Yaris had the external AUX jack via the connector on the back of the radio, so I haven't specifically seen the one you are referring to, but from my experience, there is a lot of open space within a double DIN head unit. So, you should have plenty of space to solder a set of wires parallel to the existing jack and bring them out. __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Custron T1062TYT Review (Long)	mr.steevo	In Car Entertainment + Electronics (audio / video / alarm)	1	11-24-2011 02:13 PM
Stock Springs, Stock Head Unit (no aux, and broken button), Arm Rest, +more	Betrivent	Items for Sale by private party	4	04-11-2011 11:55 AM
Req: Head unit suggestions.	xed	In Car Entertainment + Electronics (audio / video / alarm)	21	08-09-2007 07:38 PM
High pitched whine using stock head unit / aux input?	IsLNdbOi	In Car Entertainment + Electronics (audio / video / alarm)	8	02-02-2007 12:49 PM
What type of head unit with AUX port?	ebowers83	In Car Entertainment + Electronics (audio / video / alarm)	3	11-06-2006 10:21 AM

05-23-2012, 09:42 PM	#3
CoryM Drives: 2009 5-door, 5-speed Join Date: Sep 2011 Location: White Rock BC Posts: 687	Thanks Scott. I didn't think it would be too tight in there but figured I would ask. I'll give it a go once I get caught up on a few other things.... OK, a lot of other things. Not enough time in a week anymore. Thanks again.