Exhaust Tip Sizes. Which one will fit? - Toyota Yaris Forums

IsLNdbOi · 09-04-2009, 01:29 AM

Which one of these exhuast tips will fit my '09 5-door LB? Each tip comes in two sizes. Not sure which one will fit.

http://www.autoanything.com/exhausts...A2440A0A0.aspx
Outlet Size 3 5/8 x 2 1/2", Inlet Size 2.25", Length 4"
or
Outlet Size 4 1/4 x 3 1/2", Inlet Size 2.5", Length 5"

http://www.autoanything.com/exhausts...A2445A0A0.aspx
Outlet Size 3 x 4 3/4", Inlet Size 2.25", Length 4.75"
or
Outlet Size 4 x 4", Inlet Size 2.5", Length 6"

Red Horse · 09-04-2009, 02:06 AM

.....

IsLNdbOi · 09-04-2009, 02:38 AM

Thanks for the picture, but that doesn't answer the question...

Bob Dog · 09-04-2009, 02:45 AM

measure the damn thing

IsLNdbOi · 09-04-2009, 02:48 AM

I would, but I have an old exhaust tip in there right now and don't have the time to remove it to measure. Also, I'm not sure what outlet size and inlet size are.

If you have a problem with me asking, why even post in this damn thread?

Ryu · 09-04-2009, 03:05 AM

I think the one with length 6" might stick out a bit, I would suggest just buy all other 3 with different size and try to fit them yourself, keep the one you like and return the rest.

IsLNdbOi · 09-04-2009, 03:09 AM

Yeah, I don't really want a long exhaust tip either. I'm hoping the 4" one fits properly, but I'm looking for someone to confirm.

alvant · 09-04-2009, 05:58 AM

Diameter of the stock exhaust outlet is 50mm, about 1.96"... hope this helps...

*kimona* · 09-04-2009, 06:39 AM

This one fits the HB perfectly. The measurements are found in the link. You can find the same one at Walmart for about $12.

http://www.jcwhitney.com/autoparts/I...D:100000186093

IsLNdbOi · 09-04-2009, 10:44 AM

Quote:

Originally Posted by alvant

Diameter of the stock exhaust outlet is 50mm, about 1.96"... hope this helps...

Thanks alvant. That's much smaller than the 2.25" inlet of the one I want. I hope the clamp can adjust to that size.

Quote:

Originally Posted by kimona

This one fits the HB perfectly. The measurements are found in the link. You can find the same one at Walmart for about $12.

http://www.jcwhitney.com/autoparts/I...D:100000186093

Thanks kimona. That's quite a bit longer than what I want though. It's 8" long vs. 4" for the one I linked to above.

*kimona* · 09-04-2009, 01:51 PM

Quote:

Originally Posted by IsLNdbOi

Thanks kimona. That's quite a bit longer than what I want though. It's 8" long vs. 4" for the one I linked to above.

This one at 8" fits perfectly. Push it all the way back onto the exhaust pipe until it's flush against the plate, then center and tighten. It fits under the bumper quite a bit.

PHXDEMON · 09-04-2009, 08:06 PM

Quote:

Originally Posted by IsLNdbOi

Thanks alvant. That's much smaller than the 2.25" inlet of the one I want. I hope the clamp can adjust to that size.

Thanks kimona. That's quite a bit longer than what I want though. It's 8" long vs. 4" for the one I linked to above.

You don't have to attach it at the very end of the exhaust. Both tips you posted will probably fit but my touch the bumper.

PHXDEMON · 09-04-2009, 08:11 PM

Also that tip kimona posted can be picked up at walmart for like 12 bucks and is pretty decent quality. It's no borla tip but pretty good for the price.

RUFFSTUFF · 09-04-2009, 08:37 PM

I gots me a Walmart tip!

IsLNdbOi · 09-04-2009, 09:00 PM

I have the square version of that tip from Wal-Mart. I got mine from Pep-Boys. It's shorter than the one from Wal-Mart, but it still makes the exhaust pipe look too long.

I'm going to try the Borla to see if I like it any better.

*kimona* · 09-04-2009, 09:20 PM

Quote:

Originally Posted by IsLNdbOi

I have the square version of that tip from Wal-Mart. I got mine from Pep-Boys. It's shorter than the one from Wal-Mart, but it still makes the exhaust pipe look too long.

I'm going to try the Borla to see if I like it any better.

I'm not sure I understand. With the 8" long tip, it fits under the bumper edge a full 2".

Like PHXDEMON explains above, "You don't have to attach it at the very end of the exhaust." Push the tip back all the way until it fits snugly up against the exhaust pipe plate. Geez, a 10" long tip would be flush with the bumper edge.

the_boss · 09-04-2009, 11:32 PM

Quote:

Originally Posted by Bob Dog

measure the damn thing

sorry im tired...been working for the last 16 hours....!!!

charleschia1986 · 09-08-2009, 11:19 AM

from the attached picture.
i am pretty sure the middle one will FIT because that's exactly what i am using now...
regards, hope this helps..

09-04-2009, 01:29 AM	#1
IsLNdbOi Drives: Polar White - 5 Door '09 LB Join Date: Aug 2006 Location: Las Vegas, NV Posts: 1,285	Exhaust Tip Sizes. Which one will fit? Which one of these exhuast tips will fit my '09 5-door LB? Each tip comes in two sizes. Not sure which one will fit. http://www.autoanything.com/exhausts...A2440A0A0.aspx Outlet Size 3 5/8 x 2 1/2", Inlet Size 2.25", Length 4" or Outlet Size 4 1/4 x 3 1/2", Inlet Size 2.5", Length 5" http://www.autoanything.com/exhausts...A2445A0A0.aspx Outlet Size 3 x 4 3/4", Inlet Size 2.25", Length 4.75" or Outlet Size 4 x 4", Inlet Size 2.5", Length 6"

09-04-2009, 02:48 AM	#5
IsLNdbOi Drives: Polar White - 5 Door '09 LB Join Date: Aug 2006 Location: Las Vegas, NV Posts: 1,285	I would, but I have an old exhaust tip in there right now and don't have the time to remove it to measure. Also, I'm not sure what outlet size and inlet size are. If you have a problem with me asking, why even post in this damn thread? Last edited by IsLNdbOi; 09-04-2009 at 03:03 AM.

09-04-2009, 03:05 AM	#6
Ryu View User's Garage Drives: Copper Orange Mica Yaris Join Date: Feb 2006 Location: Surrey, BC Posts: 503	I think the one with length 6" might stick out a bit, I would suggest just buy all other 3 with different size and try to fit them yourself, keep the one you like and return the rest. __________________ My Copper Orange Mica Yaris with 9.3lb Kosei K1 TS http://www.yarisworld.com/forums/showthread.php?t=10951 http://www.yarisworld.com/forums/showthread.php?t=13882 http://www.yarisworld.com/forums/sho...180#post472180

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
does BACK-PRESSURE increase MPG vs straight thru...	marcus	Fuel Economy Forum	25	05-03-2009 09:23 PM
exhaust tip	DJ_stone	Cosmetic Modifications (Exterior/Interior)	1	01-20-2009 07:52 PM
Exhaust Tip Decision	ruimond	Performance Modifications	19	12-15-2008 12:49 AM
What aftermarket exhaust will fit the Yaris Sedan?	dngz	Performance Modifications	2	10-02-2006 01:41 PM
can i / where to get factory switch for aftermarket fog lights? and exhaust tip q.	fantabulousbaby	Cosmetic Modifications (Exterior/Interior)	22	08-29-2006 01:13 PM

09-04-2009, 02:38 AM	#3
IsLNdbOi Drives: Polar White - 5 Door '09 LB Join Date: Aug 2006 Location: Las Vegas, NV Posts: 1,285	Thanks for the picture, but that doesn't answer the question...

09-04-2009, 02:45 AM	#4
Bob Dog DARK PHASE OF THE MOON Drives: 07 liftback Join Date: Apr 2009 Location: the Boondocks, NC Posts: 993	measure the damn thing

09-04-2009, 03:09 AM	#7
IsLNdbOi Drives: Polar White - 5 Door '09 LB Join Date: Aug 2006 Location: Las Vegas, NV Posts: 1,285	Yeah, I don't really want a long exhaust tip either. I'm hoping the 4" one fits properly, but I'm looking for someone to confirm.

09-04-2009, 05:58 AM	#8
alvant View User's Garage Drives: 07 Yaris 1.5 E Join Date: Jul 2009 Location: SG Posts: 22	Diameter of the stock exhaust outlet is 50mm, about 1.96"... hope this helps...

09-04-2009, 06:39 AM	#9
kimona Super Moderator Drives: 2014 White VITZ Join Date: May 2007 Location: Huntington Bch, CA Posts: 4,938	This one fits the HB perfectly. The measurements are found in the link. You can find the same one at Walmart for about $12. http://www.jcwhitney.com/autoparts/I...D:100000186093

09-04-2009, 08:11 PM	#13
PHXDEMON View User's Garage Drives: 2007 Red Liftback Join Date: Oct 2008 Location: Phoenix, AZ Posts: 885	Also that tip kimona posted can be picked up at walmart for like 12 bucks and is pretty decent quality. It's no borla tip but pretty good for the price.

09-04-2009, 08:37 PM	#14
RUFFSTUFF Banned Drives: 2009 TOYOTA YARIS SEDAN Join Date: Aug 2009 Location: KINGSLAND, GA Posts: 381	I gots me a Walmart tip!

09-04-2009, 09:00 PM	#15
IsLNdbOi Drives: Polar White - 5 Door '09 LB Join Date: Aug 2006 Location: Las Vegas, NV Posts: 1,285	I have the square version of that tip from Wal-Mart. I got mine from Pep-Boys. It's shorter than the one from Wal-Mart, but it still makes the exhaust pipe look too long. I'm going to try the Borla to see if I like it any better.

09-08-2009, 11:19 AM	#18
charleschia1986 Drives: Yaris RUSH HatchBack Join Date: Jan 2009 Location: Perth, WA Posts: 80	from the attached picture. i am pretty sure the middle one will FIT because that's exactly what i am using now... regards, hope this helps..