Mk1 2szfe

[AndyCapp]

Hi to all!!
So,I'm the owner of a Yaris Mk1 Scp12 with the 2szfe.
Since there always been curiosity about this minor toyota’s brother i want to share some pics about the wotk i did in the last 10 and more years.
From the turbo bolt on conversion with stock internals to the last n/a quest.
I did the turbo conversion in 2014 when the Yaris was my daily.
Was my first work so i had some issues but learn a lot from them at the point that i made near 140.000km with that setup:
K3vet aftermarket ex mani
Td04 13l
Fmic
Uprated fuel pump with return system
Greddy emanage ecu
And a lot of handling mods.

In 2020 i buyed a Subaru Forester to turn the Yaris in a full race car with roll cage etc.
So no more daily street use.That was my dream and the dream must be followed.
Initially i purchased all forged internals to build a strong and powerful turbo engine.
I’m in C class category so it means that i’m with till 1.4 turbo and 2.0 na class with only cc and weight limit.
As you can think, you can find from group a to e1 class preparation so with the stock engine the first season was hard.
But ,as a large group a fan, i really really love the a5/k9 class in rally regulations back in the day…so i decided to build a k9 engine for the Yaris.
I purchased n/a high comp pistons,high duration and lift cams and beginned to build my own itb’s (starting from alfa romeo’s carburators).
Now i’m doing the compression ratio setup and finishing the head ports tonclose the engine…
Later i will finish to build the itb’s setup and the exshaust mani.
I will use an ecumaster classic for the management…
I will leave some pics of the progress!