|
12-04-2010, 07:57 PM | #1 |
I ain't even mad
|
Fog Lights from Garm HELP?
Well the good news is I got my foglights from MicroImage today! The bad news is one of the clips for the lenses is cracked and I have no idea if it will still be placeable or not without having it look out of place or if at all.
I also got some white microimage stickers on blue paper, if anyone knows how to apply these and informs me I'd appreciate it I'm pretty sure they are for the cars window inside?. also the bulb lens is bigger than the plastic housing slot is it supposed to be like this? If so the only thing I got wrong was the lens clip doubting its garms fault though I believe the items come prepackaged. I'll be adding photos on my main post for when they are installed. no replies from garm so I figured I'd ask here.
__________________
|
12-04-2010, 08:03 PM | #2 |
Banned
Drives: "Burning It Down GTX2860RS XB" Join Date: Sep 2010
Location: Florida
Posts: 349
|
Dude you may want to have this relocated to the cosmetic, interrior/ exterrior section. This really isn't a performance mod. Plus you may just want to PM Garm. Makes more sense.
XBG |
12-04-2010, 08:10 PM | #3 |
I ain't even mad
|
If you would of read I did PM him on MI, and I find fog lights more performance than show maybe it's just me *shrug*
thanks for your post.
__________________
|
12-04-2010, 08:19 PM | #4 |
Banned
Drives: "Burning It Down GTX2860RS XB" Join Date: Sep 2010
Location: Florida
Posts: 349
|
Wasn't trying to bust your balls...........to much.
Good luck XBG |
12-04-2010, 09:37 PM | #5 |
Okay first thing Garm is uncontactable at the moment , lol
becuase he is entertaining guest's, lol , i know becuase he told me so , lol secoundly the clip that is broken is on the plastic Shroud correct not oo the light so this will not stop instalation of the lights so instal them and wire them up by this timer Garm should have a replacement shroud in the post , if you have told him what side it is . 3rdly the MI transfers go on the outside of your car window just make sure they are real clean first , and once on heat them with a heat gun or hair drier to activate the glue 100% otherwise they wont last. hope all that helps . Last edited by 1NZYaris1; 12-04-2010 at 09:53 PM. |
|
12-06-2010, 09:53 PM | #6 |
I ain't even mad
|
will the shroud itself still be placeable? if so I won't need a new one I just need to know if its installable as is with the same outcome.
__________________
|
12-06-2010, 09:56 PM | #7 |
Not quite a noob
Drives: e46 325 Join Date: Jul 2009
Location: edmonton
Posts: 1,408
|
The sticker is applied by removing the clear side, sticking the wording on the windows, and peeling the blue layer off, if I recall. Or just take of a layer, and see which way the letters stick.
|
12-06-2010, 10:02 PM | #8 |
For the time being install them, and try contacting Garm all will be well
|
|
12-06-2010, 10:42 PM | #9 | |
USAF_SrA_E-4
|
1 whp hehe
Kevin nothing some crazy glue cant fix homes lol
__________________
Quote:
|
|
12-06-2010, 11:40 PM | #10 |
Not quite a noob
Drives: e46 325 Join Date: Jul 2009
Location: edmonton
Posts: 1,408
|
I was thinking some good epoxy should do it. There's very little strain on that clip if I recall.
|
12-07-2010, 11:29 PM | #11 |
I ain't even mad
|
dyno?
and you guys thing I should super glue it lol? bumping for some last opinions.
__________________
|
12-07-2010, 11:42 PM | #12 |
ULTIMATE
Drives: 07 Yaris Turbo Join Date: May 2007
Location: Canoga Park, CA
Posts: 14,859
|
epoxy is better than super glue. and yeah, that clip doesn't have to too strong to do its job.
stickers: 1. clean where the sticker is going to be installed. 2. Watch this first: http://www.youtube.com/watch?v=MokSvReOT8g 3. peel off the top paper with the sticker ATTACHED TO IT. Toss the (now empty) blue bottom paper. 4. Now you have a sticker with sticky paper on top of it. Install the sticker wherever you want (rear quarter panel is good), OUTSIDE. 5. Peel the top paper off SLOWLY, preferably in the sun or with some heat. Use an angle so the sticker stays on the car. 6. ENJOY MORE HORSEPOWER
__________________
Micro Image forums, online store and shop are now closed. It was a great eight year run, but it was time to focus on other things. I'm still selling parts on eBay under micro*image seller ID and customers can still make requests for anything specific. |
12-07-2010, 11:49 PM | #13 |
I ain't even mad
|
alright sweet thanks, what is epoxy? Where can I find that lol
also LOL horsepower, this can go on the body aswell? That's crazy, figured I'd pop it on since no one here in town with a YARIS is on here, it might inspire a few.
__________________
|
12-08-2010, 03:01 AM | #14 |
noob-toob
Drives: 2007 yaris 4dr sedan Join Date: Sep 2010
Location: victoria, bc
Posts: 59
|
__________________
|| "it's a tough job, but somebody has got to do it" || |
12-08-2010, 03:23 PM | #15 |
DAT'S RIGHT I GOTz 2
|
GOOGLE it.
you do know how to GOOGLE don't you?
__________________
|
12-08-2010, 08:59 PM | #16 |
I ain't even mad
|
Nice comment reject.
__________________
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
How to turn on the running lights and fog lights @ same timewhile/headlights off ...? | Moratiya | DIY / Maintenance / Service | 8 | 12-11-2010 06:40 PM |
my Projector Fog lights project | ezhacker1 | Cosmetic Modifications (Exterior/Interior) | 3 | 01-10-2010 05:21 PM |
Fog Lights Poll | Reeves360 | Cosmetic Modifications (Exterior/Interior) | 14 | 12-27-2009 02:00 AM |
Sedan Fog Lights, few questions!(where to get) ( make into HID Fog Lights!!!) | Lafiro | Cosmetic Modifications (Exterior/Interior) | 2 | 06-12-2009 03:56 PM |
can i / where to get factory switch for aftermarket fog lights? and exhaust tip q. | fantabulousbaby | Cosmetic Modifications (Exterior/Interior) | 22 | 08-29-2006 01:13 PM |