Group Buy - True Double Din Radio Trim for Liftbacks (180mm opening)

[lammy29]

what about these for the pockets?
http://cgi.ebay.co.uk/DIN-pocket-cub...3%3A1|294%3A50
or
http://cgi.ebay.co.uk/Snap-In-Din-po...3%3A1|294%3A50

[IsLNdbOi]

You should look for the authentic Toyota branded single din pocket w/ door. I've found some on eBay before. I think they came out of old Camrys.

[lammy29]

Originally Posted by IsLNdbOi

You should look for the authentic Toyota branded single din pocket w/ door. I've found some on eBay before. I think they came out of old Camrys.

i tried searching, but don't know what to search for. the reason i trying find a different one is because its a usa seller and i prefer if possible a uk seller that way save time and custom payment

typed in toyota single din and found this what u reckon?
http://cgi.ebay.co.uk/Toyota-Verso-t...3%3A1|294%3A50
or even this one
http://cgi.ebay.com/ebaymotors/METRA...fAudioQ5fVideo

[CTScott]

Originally Posted by lammy29

i waited 2yrs nearly..........

so i dont need to purchase the item your selling?

The part that this thread is about is the PZ489-B0330-00, which is one of the three Toyota parts that you need.

[CTScott]

Originally Posted by lammy29

what about these for the pockets?
http://cgi.ebay.co.uk/DIN-pocket-cub...3%3A1|294%3A50
or
http://cgi.ebay.co.uk/Snap-In-Din-po...3%3A1|294%3A50

The second one has this disclaimer:

"Please not if you are installing a stereo into a Japanese vehicle you will need the dearer din pocket kit as the standard width of a Japanese aperture is smaller than din size and the pocket has to fit from behind."

So, I think you need one which attaches to the brackets with screws, rather than a snap-in one.

[lammy29]

Originally Posted by CTScott

The part that this thread is about is the PZ489-B0330-00, which is one of the three Toyota parts that you need.

cool, just me making sure and wastin your time sorry!!

Originally Posted by CTScott

The second one has this disclaimer:

"Please not if you are installing a stereo into a Japanese vehicle you will need the dearer din pocket kit as the standard width of a Japanese aperture is smaller than din size and the pocket has to fit from behind."

So, I think you need one which attaches to the brackets with screws, rather than a snap-in one.

so would you say safest bet is the one you recommended first time?
http://cgi.ebay.co.uk/ws/eBayISAPI.d...m=350203320551

[IsLNdbOi]

This is the Toyota one with the door:

http://cgi.ebay.co.uk/DIN-Pocket-Tra...3%3A1|294%3A50


found it after 5 seconds of searching.

[CTScott]

Originally Posted by lammy29

i tried searching, but don't know what to search for. the reason i trying find a different one is because its a usa seller and i prefer if possible a uk seller that way save time and custom payment

typed in toyota single din and found this what u reckon?
http://cgi.ebay.co.uk/Toyota-Verso-t...3%3A1|294%3A50
or even this one
http://cgi.ebay.com/ebaymotors/METRA...fAudioQ5fVideo

This would work:

http://cgi.ebay.co.uk/Autoleads-FP-0...3%3A1|294%3A50

[CTScott]

Originally Posted by IsLNdbOi

This is the Toyota one with the door:

http://cgi.ebay.co.uk/DIN-Pocket-Tra...3%3A1|294%3A50


found it after 5 seconds of searching.

I am not sure if that would fit. It depends on if the door width is less than 174mm.

[lammy29]

Originally Posted by CTScott

This would work:

http://cgi.ebay.co.uk/Autoleads-FP-0...3%3A1|294%3A50

once again ima go into my local dealer and see how much i can get the three parts for and hopefully they will have it!! i let you know how it goes. maybe pm you becus i used like a whole page in this thread

[lammy29]

"Well the prices are similar, in order to actually supply you with something I will adjust the postage a bit laugh.gif

Total price inc delivery 107.42" managed to get the three parts for little bit cheaper after asking around was orginally £118. also ordered http://cgi.ebay.co.uk/ws/eBayISAPI.d...m=260363938539

hopefully will be here for friday!!!!! i let you know how it goes!!!

once again Thanks! cant wait!!!! i think i might need adapter so it can fit the alpine system right?

[CTScott]

Originally Posted by lammy29

"Well the prices are similar, in order to actually supply you with something I will adjust the postage a bit laugh.gif

Total price inc delivery 107.42" managed to get the three parts for little bit cheaper after asking around was orginally £118. also ordered http://cgi.ebay.co.uk/ws/eBayISAPI.d...m=260363938539

hopefully will be here for friday!!!!! i let you know how it goes!!!

once again Thanks! cant wait!!!! i think i might need adapter so it can fit the alpine system right?

Yes, you need a wiring harness adapter:

http://cgi.ebay.co.uk/TOYOTA-YARIS-R...3286.m63.l1177

[lammy29]

Originally Posted by CTScott

Yes, you need a wiring harness adapter:

http://cgi.ebay.co.uk/TOYOTA-YARIS-R...3286.m63.l1177

cool i rang up halfords and prob pick up one later today or on friday

[IsLNdbOi]

Originally Posted by WeeYari

Ground off the positioning pins on the HU mounting brackets. Was then able to position HU further back.

If possible, can you post pictures of your modified mounting brackets? Which of the positioning dimples did you grind off on each bracket?

So the new trim piece doesn't rest on the face frame of your head unit? If not, don't you see a gap / empty space around the face frame of your head unit (between the face frame and the trim piece)?

[WeeYari]

Originally Posted by IsLNdbOi

If possible, can you post pictures of your modified mounting brackets? Which of the positioning dimples did you grind off on each bracket?

So the new trim piece doesn't rest on the face frame of your head unit? If not, don't you see a gap / empty space around the face frame of your head unit (between the face frame and the trim piece)?

I really don't feel like ripping everything apart again.

If possible, can you take and post up a picture of the side of your HU, as well as one of the mounting bracket. I will then use those to show you what I did.

The trim piece does rest on the HU. When the trim reaches the point where it snaps into place, the back side of the opening just meets up with the 'flange' on the face frame.

[CTScott]

Originally Posted by WeeYari

I really don't feel like ripping everything apart again.

If possible, can you take and post up a picture of the side of your HU, as well as one of the mounting bracket. I will then use those to show you what I did.

The trim piece does rest on the HU. When the trim reaches the point where it snaps into place, the back side of the opening just meets up with the 'flange' on the face frame.

Here's a picture of the left bracket. You can see the six alignment bumps.

Radio Bracket.jpg

[WeeYari]

Scott,

Can you give me two pictures of the bracket standing on its end as if it was in its mounted position. I would like one of both the inside, and outside of the bracket. It would be my intent to combine bracket photos, with one of the side of the HU so that I may draw arrows between the two to indicate re-alignment positioning.

Thanks.

[CTScott]

Originally Posted by WeeYari

Scott,

Can you give me two pictures of the bracket standing on its end as if it was in its mounted position. I would like one of both the inside, and outside of the bracket. It would be my intent to combine bracket photos, with one of the side of the HU so that I may draw arrows between the two to indicate re-alignment positioning.

Thanks.

Stock radio with bracket mounted:

Stock Radio Mounting Brackets.jpg


Both brackets viewed from front:
Both Brackets.jpg


Left Bracket:
Left Bracket.jpg

Right Bracket:
Right Bracket.jpg