Something came in the mail today Pt.2 - Toyota Yaris Forums

riceboy · 08-10-2006, 03:58 PM

I was already pretty happy with the arrival of my new Netz emblem... but I was super happy when I received another delivery from UPS..

I ran down to my dealer, and had them install it right away.....

riceboy · 08-10-2006, 04:00 PM

BTW It's a noticeable difference from about 4,000 RPM and up,... and it's not a short ram, the filter ends up under the headlight.

fnkngrv · 08-10-2006, 04:03 PM

you drive an auto or stick?

redglare45 · 08-10-2006, 04:23 PM

Sweet!!! That's the TRD intake listed for the Yaris correct? Or is that custom/special order style?

LBdriver · 08-10-2006, 06:24 PM

looks nice.
I know you did not do the install but
what is the tubing size? and
did you see anything special inside the tube where the mass airflow sensor mounts?

riceboy · 08-10-2006, 06:47 PM

I drive a stick, and it is the TRD intake listed for the Yaris, I didn't do any measuring but my best guess for the tubing size would be about 2 inches. It was broken down into four major parts, two tubes, the air filter, and the bypass valve.

redglare45 · 08-10-2006, 07:29 PM

Well it came out looking very nice

I got mine 2 days ago, but haven't installed it yet.
Gotta do that today.

azhuskcarr · 08-10-2006, 07:42 PM

Where did you get the intake at??? Thanks !!!

riceboy · 08-10-2006, 08:46 PM

www.trdsource.com, but i think that you can get a hold of it at any US dealer...

ChinoCharles · 08-10-2006, 11:21 PM

Its beautiful! I can't wait to get one. You should mosey down to a dyno. -nudge

soros151 · 08-11-2006, 12:31 AM

You better not go over 2" with an intake with the 1NZ cause it will bog a lot and the speed of the air coming in is too slow for performance increase.

aucorium · 08-11-2006, 01:08 AM

Hi

How much did it cost and for with size yaris motor does it apply , is it for the 1.3?

I live in South Africa and would love to get my hands on that for my yaris.

LBdriver · 08-11-2006, 09:26 AM

thanks riceboy for the reply.
I can confirm what soros151 has stated.
I tried a custom 3" intake and it was a no go.
I'm glad it was due to the diameter of the tubing (thought so).
The mass airflow sensor is installed in a 2" diameter tube, in the stock
configuration.

Linkseal · 08-11-2006, 01:09 PM

Quote:

Originally Posted by riceboy

www.trdsource.com, but i think that you can get a hold of it at any US dealer...

Nice Intake...I have the same taste...you know can I order from dealership in BC if I just give them the parts number? or the TRDsource.com is the only source for the TRD intake?

riceboy · 08-11-2006, 01:33 PM

to my knowledge the TRD intake is not available in Canada yet.. I had to order it from the US for that reason..

Linkseal · 08-11-2006, 01:52 PM

Quote:

Originally Posted by riceboy

to my knowledge the TRD intake is not available in Canada yet.. I had to order it from the US for that reason..

Oh shoot... Guess I have to order from TRDSource.com man...

thx for your reply

riceboy · 08-11-2006, 04:33 PM

Just a word of advice.. if you're able to you may want to drive down across to the US yourself.. I got dinged with some nasty customs and brokerage fees.... I think all US dealers will have access to the unit... check trdsource for the product number.

redglare45 · 08-11-2006, 05:42 PM

Quote:

Originally Posted by riceboy

Just a word of advice.. if you're able to you may want to drive down across to the US yourself.. I got dinged with some nasty customs and brokerage fees.... I think all US dealers will have access to the unit... check trdsource for the product number.

That's interesting. Why don't Canadian dealers offer the intake also?

I got mine from Claremont Toyota dealer, about 25 minutes away from me here in California.

08-10-2006, 03:58 PM	#1
riceboy Drives: icebox Join Date: Apr 2006 Location: CAN Posts: 1,003	Something came in the mail today Pt.2 I was already pretty happy with the arrival of my new Netz emblem... but I was super happy when I received another delivery from UPS.. I ran down to my dealer, and had them install it right away..... Last edited by riceboy; 12-17-2006 at 02:21 PM.

08-10-2006, 04:03 PM	#3
fnkngrv Mr. 155 and climbing View User's Garage Drives: Seriously Modded 07 Sedan Join Date: Jun 2006 Location: In The Hotbox Posts: 4,742	you drive an auto or stick? __________________ Team Tiamat Racing on Facebook Youtube Channel: Team Tiamat Racing *Class record holder in Land Speed @ 154.5mph for 1.5 mile and 145.5mph in the mile in the F (2.016 to 3.014 L), G (1.524 to 2.015 L), and H (1.016 to 1.523 L) classes.*

08-10-2006, 04:23 PM	#4
redglare45 View User's Garage Drives: 07 Sedan - 5 Speed Manual Join Date: May 2006 Location: Pomona / Pasadena, California Posts: 337	Sweet!!! That's the TRD intake listed for the Yaris correct? Or is that custom/special order style? Last edited by redglare45; 08-10-2006 at 06:10 PM.

08-11-2006, 12:31 AM	#11
soros151 Another question... :D Drives: Scion tC 06 Join Date: Jul 2006 Location: Puerto Rico Posts: 70	You better not go over 2" with an intake with the 1NZ cause it will bog a lot and the speed of the air coming in is too slow for performance increase. __________________ One tire nearer to my goal

08-11-2006, 01:08 AM	#12
aucorium AKA Samurai Racer Drives: Yaris 2006 Join Date: Jul 2006 Location: South Africa Posts: 834	Hi How much did it cost and for with size yaris motor does it apply , is it for the 1.3? I live in South Africa and would love to get my hands on that for my yaris. __________________ JDMtuner Import Performance Tuning www.jdmtuner.co.za

08-10-2006, 04:00 PM	#2
riceboy Drives: icebox Join Date: Apr 2006 Location: CAN Posts: 1,003	BTW It's a noticeable difference from about 4,000 RPM and up,... and it's not a short ram, the filter ends up under the headlight.

08-10-2006, 06:24 PM	#5
LBdriver Drives: 07 yaris MT Join Date: Aug 2006 Location: texas Posts: 10	looks nice. I know you did not do the install but what is the tubing size? and did you see anything special inside the tube where the mass airflow sensor mounts?

08-10-2006, 06:47 PM	#6
riceboy Drives: icebox Join Date: Apr 2006 Location: CAN Posts: 1,003	I drive a stick, and it is the TRD intake listed for the Yaris, I didn't do any measuring but my best guess for the tubing size would be about 2 inches. It was broken down into four major parts, two tubes, the air filter, and the bypass valve.

08-10-2006, 07:29 PM	#7
redglare45 View User's Garage Drives: 07 Sedan - 5 Speed Manual Join Date: May 2006 Location: Pomona / Pasadena, California Posts: 337	Well it came out looking very nice I got mine 2 days ago, but haven't installed it yet. Gotta do that today.

08-10-2006, 07:42 PM	#8
azhuskcarr Drives: 07 Yaris Sedan 5spd Join Date: Jun 2006 Location: AZ Posts: 9	Where did you get the intake at??? Thanks !!!

08-10-2006, 08:46 PM	#9
riceboy Drives: icebox Join Date: Apr 2006 Location: CAN Posts: 1,003	www.trdsource.com, but i think that you can get a hold of it at any US dealer...

08-10-2006, 11:21 PM	#10
ChinoCharles Banned Drives: LB Join Date: Jul 2006 Location: OH Posts: 7,787	Its beautiful! I can't wait to get one. You should mosey down to a dyno. -nudge

08-11-2006, 09:26 AM	#13
LBdriver Drives: 07 yaris MT Join Date: Aug 2006 Location: texas Posts: 10	thanks riceboy for the reply. I can confirm what soros151 has stated. I tried a custom 3" intake and it was a no go. I'm glad it was due to the diameter of the tubing (thought so). The mass airflow sensor is installed in a 2" diameter tube, in the stock configuration.

08-11-2006, 01:33 PM	#15
riceboy Drives: icebox Join Date: Apr 2006 Location: CAN Posts: 1,003	to my knowledge the TRD intake is not available in Canada yet.. I had to order it from the US for that reason..

08-11-2006, 04:33 PM	#17
riceboy Drives: icebox Join Date: Apr 2006 Location: CAN Posts: 1,003	Just a word of advice.. if you're able to you may want to drive down across to the US yourself.. I got dinged with some nasty customs and brokerage fees.... I think all US dealers will have access to the unit... check trdsource for the product number.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Something came in the mail today...	riceboy	Cosmetic Modifications (Exterior/Interior)	10	08-24-2006 12:45 AM
Placed my order today	drdavidr4u	New YARIS Purchase Forum	8	06-19-2006 03:43 PM